For a better result, it is advisable to refuse to use the bathroom for its intended purpose for a period of 12 hours. Unfortunately, the tea tree is powerless against old mold.

3omestos

A less effective way is to periodically clean problem areas. Do not forget that the fungus is usually invisible, therefore, for prevention, it is better to periodically treat all the seams in the bathroom with Domestos.

The essence of the method is to wash problematic seams at intervals of 2-3 days for 2-3 weeks. It is necessary to wash the fungus with a simple cleaning agent, such as Domestos or any other chlorine-containing solution.

Remember to wipe the seam with a dry cloth every time. It is very important to continue doing this even after there are no visual traces of the fungus left.

Sometimes, despite all the efforts of the owners of the bath with mold, it is not possible to get rid of the problem. In this case, it remains to use the expensive services of sanitation and ionization specialists. Using a special device, they will treat the problem area with a directed stream of air enriched with ions and microelements.

Now that you know how difficult it is to deal with black mold in the bathroom, about its effect on the body, the causes of its appearance and preventive measures, it will be easier for you to prevent an uninvited guest from entering your apartment.

Many housewives are wondering how to remove the fungus in the bathroom, because mold on the walls is a common occurrence in rooms with a high level of humidity. Such a problem not only spoils the appearance of the bathroom, but also creates a health hazard for residents, because regular inhalation of fungal spores can cause an allergic reaction or even harm the respiratory system.

Quite often, dark marks appear on the walls of the bathroom with a high level of humidity, which some housewives mistakenly confuse with pollution. In this situation, the cause of the appearance of such spots is the activity of pathogenic microflora.

The formation of plaque in different parts of the room is associated with the reproduction of certain types of microorganisms. In order to find an effective agent against microorganisms, one should consider them in more detail.

Table 1. Varieties of the fungus.

Danger of mold and mildew

Any fungi first of all destroy the overlap, because they actively grow into the deep layers of the material. This not only provokes peeling of plaster, paint, but also cracks.

If the appropriate processing is not carried out in time, then the probability of the collapse of the wall is not excluded. Of course, this happens only in exceptional cases, when there are too many colonies.

Another nuisance is that fungi provoke the occurrence of various diseases. This category includes the following:

• fungal infection of the skin;
• headache;
• respiratory diseases;
• disorders of the digestive tract;
• diseases of the musculoskeletal system.

Note! If such a problem is left unchecked, then the active spread of fungi will eventually lead to incurable disorders of the liver, respiratory tract and other vital organs of the household.

Pathogenic flora poses a great danger to people with weak immunity, and in particular the elderly and seriously ill people, children.

Find out what to do if, and also check out folk remedies in a special article on our portal.

How to prevent fungus

It is worth noting that in any room there are mold spores, but they begin to spread only if there is a favorable environment - there is more humidity. 28% and temperatures above 19 degrees.

Measures to combat such a problem primarily involve the elimination of humidity, because in a dry room, even in the presence of high temperature, the pathogenic flora is not active.

Preventive measures include the following:

• Ensure adequate ventilation. So, in any multi-storey buildings, as a rule, there is a special ventilation duct. Over time, it becomes clogged and stops performing its functions, so cleaning is required. If desired, you can install a fan or air conditioning. However, even taking into account good ventilation, you should regularly ventilate the bathroom (especially after water procedures, washing).

• It is necessary to wipe the pipes from the collected condensate in a timely manner. That is why many people prefer to install plastic pipes instead of metal ones, because they are resistant to leakage and are less likely to be covered with fumes.
• Attention should also be paid to containers where brushes, various creams, powders and other hygiene products are stored. If wet jars and bottles are placed in the container, then water accumulates in them, which can also cause the formation of fungi.

• During the repair it is necessary use specialized plaster components that repel moisture.

Get rid of mold and mildew

If it has already appeared on the walls, then preventive measures will not help. Here it will already be necessary to use various mechanical, folk and chemical methods of struggle.

We get rid of the fungus mechanically

Many housewives, having found a black coating on the walls, try to remove it with a spatula. In order for this to be effective, you will need to observe certain nuances:

1. The first step is to wet the stains with clean water - this will stop them from further spreading through the air.
2. Then you need to take any scraper with coarse sandpaper and carefully sand the surface. If necessary, you can remove the top layer from the ceiling using milling equipment.

In advanced situations, even such measures are not enough, so you will have to do a global repair, which involves the following:

1. Removing the top coating from the wall, because the mold can be under the wallpaper, tiles.
2. Cleaning the ceiling from a layer of lime and paint.
3. Dismantling of the floor covering.

During major repairs, the walls must be treated with a disinfectant. Moreover, such substances should be applied to all floors, even in places where mold does not spread.

Note! For efficiency, the floors are treated at least three times in a row, observing the drying steps. Only then is it allowed to apply finishing plaster.

Removing the fungus by folk methods

The spread of fungi on the surface of the walls is a long-standing problem. Since chemicals appeared in everyday life not so long ago, people used time-tested folk recipes. They do not lose their popularity today, so we will consider these methods in more detail.

Using copper sulfate (copper sulfate) - step by step instructions

This is a budget tool that anyone can purchase at a gardening store. Copper sulphate is a crystal that is diluted with a liquid (based on 150 grams per 10 liters).

Step 1. First you need to mechanically clean the remains of mold on the walls.

Step 2 Now you should dissolve a piece of laundry soap in water and treat the surface with it, after which the wall should dry out for a day.

Step 3 It is necessary to pour a solution of copper sulfate into a volumetric spray gun and treat the floors with it.

The surface must dry for 5-6 hours and only then the processing is repeated

Note! In order to increase the effectiveness of a home remedy, a little acetic acid can be added to the copper sulfate solution. The procedure is repeated up to five times (depending on the degree of fungal infection).

Using vinegar - step by step instructions

Acetic acid is a substance that is found in the kitchen of every housewife, because it is actively used for cooking. In addition, vinegar has a good antiseptic effect, so it is used in the treatment of sweat mold walls.

The only disadvantage of this method is the pungent smell of a bite, therefore, during the processing, the windows are left open, and the respiratory organs are protected with a respirator.

Step 1. It is necessary to treat sections of the wall with a black coating with vinegar. For such purposes, you can pour the product into a spray bottle. The tile is wiped with a sponge dipped in acetic acid

Step 2. With after a while, remove the remnants of plaque with a spatula or a hard sponge.

Note! Sometimes, after treatment with vinegar, unsightly marks remain on the walls, so you have to paint or plaster the floors.

Other home remedies for mold

There are other equally effective fungicide-based surface treatments.

Table 2. Popular folk remedies with an antiseptic effect.

Note! For greater efficiency, many housewives prefer to combine funds. For example, you can add vinegar and hydrogen peroxide to baking soda.

Video - How to clean the seams between the tiles in the bathroom

Anti-mold chemicals

If a large number of fungal colonies are observed on the walls, then it will be difficult to get by with only folk remedies. Only professional cleaning products can cope with this task. Since manufacturers offer us many options, we will consider the most effective ones.

Table 3. Effective shop remedies for mold.

Prices for various types of Dali universal antiseptic

Universal antiseptic Dali

Video - How to remove mold in a couple of seconds!

Bathroom ionization

Another effective way to treat a room from a fungus is to use an air jet saturated with ions. It is impossible to do this without appliances, so the rehabilitation is carried out by specialists.

When the main part of the wall is affected by fungi, it becomes difficult to cope with the problem on your own, so it’s better not to waste time and contact the specialists of the company who are involved in the processing.

However, you can purchase an ionization device for your own use. True, a household ionizer will not be as powerful as a professional one, but it can be used regularly (for example, turn it on and leave it at night).

Prices for popular models of ionizers

Ionizers

Safety precautions when cleaning a room from mold

Any procedures for removing mold from the surface of walls are considered unsafe for health, because spores are easily transferred to human skin, and then provoke diseases. In addition, caustic alkaline components are used during chemical treatment, which also do not have the best effect on the condition of the skin.

In order to protect yourself from harmful effects, it is recommended to use the following:

• durable rubber gloves for hands;
• respirators that protect the respiratory system;
• plastic glasses.

Since during the cleaning process you have to scrape off a dark coating from the walls with a spatula, dust settles everywhere. Therefore, it is recommended to first remove glasses, hygiene products and other trifles from the bathroom. It is better to cover large items with a thick oilcloth.

In addition, no strangers, children, pets should be present during cleaning in the room. Upon completion of the procedure, the bathroom should not be entered for several more hours.

Summing up

To achieve a positive result, you have to constantly fight fungi. If desired, you can combine some home and chemical products, but the main thing is to follow safety precautions. Good luck!

3913 0 0

Fight against the worst enemy - we destroy the fungus in the bathroom forever

Not only people, animals and plants can get sick, our houses, apartments can also get sick, and after them we ourselves. One of the most common apartment diseases appears in the wettest corner of the home, and its name is a fungus. It not only spoils the appearance of the bathroom, but also harms the human body, so today I will tell you how to remove the fungus in the bathroom once and for all.

The bathroom is the wettest room in the entire apartment - everyone knows this, and excess moisture and poor ventilation are the first reasons for the appearance of this uninvited guest. Such a seemingly insignificant flaw is actually a very comfortable condition for the mold fungus to develop and multiply well.

If you didn’t know yet, then there are disputes of this unwanted guest in any apartment or house, but they begin to germinate under such conditions:

• poor waterproofing;
• the room is poorly ventilated;
• the temperature in the bathroom is more than 20 ° C;
• humidity of the room is more than 90% (at a rate of 70-80%).

So, if these conditions are observed in your bathroom, the fungus is guaranteed to you. When such a neighbor appears, it is urgent to deal with him, because he has a bad effect not only on the walls, but also on the health and well-being of the residents of the problem apartment. It is not the mold itself that grows on the walls that negatively affects a person, but the spores that hover in the air.

Like other fungi, mold releases spores into the space that surrounds it. A person, inhaling them along with the air, runs the risk of getting sick. It may appear:

• cough;
• runny nose;
• rheumatic and headaches;
• nausea;
• asthma;
• allergic reactions on the skin.

Do you think this is all that can cause mold in your home? Do you think these diseases are not so terrible as to sound the alarm? You are mistaken, because this is not the whole list of what the fungus that appears in the apartment is dangerous for.

If your health and well-being are important to you, as well as those who are nearby, do not postpone the fight against this unwanted guest until later. Having found in the bathroom even a small area affected by a fungus - urgently take measures to destroy the "enemy".

Getting rid of adversity

It is quite possible to destroy the enemy of the bathroom, but for this you need to find out the reason for its appearance. Before destroying the mycelium, you must carefully examine your room.

It may not even be a weak exhaust fan, the cause of dampness may be a clogged ventilation shaft, in which case only cleaning it and no other means will help to cope with the problem.

So, the question arose before us: how to get the problem out of the house forever? It is possible to destroy the completely sprouted body of this microorganism only if you get rid of the mycelium.

As a rule, what is on the walls and ceiling is a body of mold, which can be located a few meters from the mycelium itself. So, the beginning of the fight against mold is to find the source of the whole problem.

One type of fungus in bathrooms is black mold. It is weakly fixed to the surface of the walls and ceiling, so it easily scatters to the sides. It is this variety that is very dangerous for humans, because by inhaling it, various infections can be provoked.

Black fungus in the bathroom is the most difficult to destroy. To achieve this and forget about the misfortune forever, you may have to use more than one antifungal agent.

We remove the fungus at the initial stage

If you notice that you have high humidity in your bathroom, and the surface of the ceiling and walls began to bloom (unpleasant black spots began to appear), you need to sound the alarm urgently. I do not advise delaying the procedures, because getting rid of a problem that has just appeared is not so difficult, the most difficult thing is to eliminate the problem at an advanced stage.

So, now I will tell you how to deal with the fungus:

1. We organize a good one. Dampness appears in a poorly ventilated room, so we clean the vent if it is clogged. It is worth installing a more powerful fan if cleaning the ventilation hole does not help to cope with dampness.
2. Get rid of dampness. To do this, we put plumbing in order, eliminate leaks, if any.

1. We fix sewer pipes. I think you have noticed how condensation collects on old cast-iron pipes with poor insulation, which also affects the humidity of the room. To prevent this, you need to make the right insulation or replace the cast-iron pipes with plastic ones.
2. We raise the issue of waterproofing. Puzzling over the question of how to get rid of the fungus in the bathroom? Waterproofing walls and ceilings is an important point in the fight against fungus, so it is better to use waterproof paint instead of tiles for finishing the bathroom.
   Before facing surfaces, do not forget to apply special waterproofing coatings. For example, the IZOCID antiseptic can be used during repairs, added to cement mortars, water-soluble paints, etc. This tool prevents the appearance of unwanted mold.
3. We find all the mold. You need to find everything, even though it can be even in hard-to-reach places: under the bathroom or behind the washing machine. All affected areas are removed mechanically (we scrape and clean).
4. We pierce the treated areas with hot air. For this, a heater or a powerful hair dryer is suitable.

Boiling water is not suitable for piercing infected places! Only dry heat is needed to kill the fungus.

1. We process surfaces. We apply an antifungal agent to the walls, ceiling and cleaned areas.

The problem can appear in the most unexpected place, so it is necessary to process everything if possible. We process the shower head and do not forget about plumbing, since it is she who can become a breeding ground for fungus. But it is necessary to treat your house or apartment in such a way as not to harm your health.

Treat the air in the bathroom with an antifungal spray. Anything you can find at a hardware store or hardware store. This will destroy the spores of the fungus that are in the air.

1. We warm up the room. Finally, use a hair dryer or heater again. The room must be well warmed up and dried.

We destroy the progressive fungus

Further instruction is needed to deal with a running case. It is necessary to approach the destruction of this destroyer of the house in a complex way, otherwise you cannot get rid of it. So, what needs to be done to make the existence of a fungus in the bathroom impossible:

1. We improve ventilation, reduce dampness in the room, carry out waterproofing work. I have already spoken about this in detail. All these manipulations are necessary to deal with both strongly overgrown myceliums and the problem at the initial stage.

1. Throw away old furniture. If the mold progresses and lives in your bathroom for a short period of time, then its spores may have penetrated deep into the material. So that the problem does not start to reappear after it has been eliminated on other surfaces, it is advisable to replace the old furniture with a new one.
2. We destroy mold. We begin this stage, of course, by drying the room with an electric heater. To combat the misfortune, you need to use various means: from "home" to special tools purchased in hardware stores.

I want to tell you what stages it is worth carrying out the fight against the enemy of the bathroom:

1. We are looking for a source of mold (mycelium). It can be anywhere, even in a very inaccessible place. When the focus is found, it must be mechanically removed, namely, scraped off and cleaned.

If it was not possible to find the source of the problem, namely the mycelium, you need to clean all surfaces that have mold. You can try to tap the walls, and if voids are found, they need to be opened and also cleaned. If the mycelium is not found, you can try to do the same manipulations on the ceiling.

1. We remove the affected between the tiles, between the wall and the bathroom. The question may arise: how to remove this grout? I will gladly answer - a flat screwdriver of the required width and a small hammer are perfect for removing infected grout.

It is also worth doing a complete cleaning of other seams. For example, if mold colonies appear on silicone and conventional treatment with drugs does not help. Perhaps it germinates under silicone and the only correct solution is to replace it with a new one (preferably a special one that is resistant to such microorganisms).

1. Drying the bathroom.
2. We process the selected anti-fungal agent (some can be applied with a sponge). I will tell you about the most famous ones a little later.
3. Warm up the room again.
4. We enjoy the bathroom without any signs of fungus habitation.

Now you know how to wash and, most importantly, completely destroy the mold. If you do everything right, this problem will no longer bother you. If high humidity still bothers you, install a good heated towel rail.

Choosing effective remedies for fungus

Now I want to tell you about the means by which you can deal with the problem in the bathroom. There are not only folk remedies for the destruction of mold, but also special modern preparations designed to eliminate this particular problem.

You can get rid of an unwanted "guest" with your own hands using improvised means, which can be found in almost any apartment. For example, using vinegar or chlorine bleach, but special formulations also show good results.

Before buying an antiseptic in a store, you need to carefully study its composition and make sure that the drug is antibacterial and antifungal.

In order not to spoil the appearance of finishing materials, do not forget to find out how an aggressive antifungal agent affects each of them (lacquer, paint, tile, enamel, etc.).

Grandma's ways

Special tools designed for the professional destruction of mold in the bathroom appeared not so long ago. Prior to this, our ancestors used various liquids that can destroy mold.

By the way, some of them are not safe for humans, so be sure to use overalls, a respirator and rubber gloves. Others allow cleaning the bathroom for those people for whom working with chemicals is impossible due to allergies or problems with the respiratory tract.

Now I will tell you how to clean the affected surfaces of the bathroom:

1. Creosote. This tool is the first on my list, which is made on the basis of tar, and in more ancient times it was often used to combat mold. Since ancient times, creosote has been used to treat building structures made of wood to protect them from decay.

This liquid is oily, burning, having a strong odor and a slight yellow tint. Creosote is difficult to dissolve in water, so alcohol or ether is used for this. The substance is dangerous both for the fungus and for humans, therefore, after application, creosote must be removed from all surfaces: first treat with detergent, then rinse with water.

Do not treat wooden furniture or upholstery with this powerful substance, as the creosote will absorb into them very quickly, and it will be impossible to wash it off. Suitable materials for creosote treatment are brick, concrete and ceramics.

1. White vinegar. I put this substance in second place - vinegar is effective and every housewife can find it in the kitchen. This product is not dangerous, unlike creosote, and the only negative after its application is not the most pleasant smell, which will not last long and will soon disappear.
   Imagine, this most common and inconspicuous vinegar is capable of destroying about 75-80% of mold varieties. If vinegar is not dangerous for our body, then for mold it is a real poison. There are many types of vinegar, but ordinary clear vinegar without additives can really help.

Instructions for using vinegar to treat affected surfaces:

• pour the product into a spray bottle or on a rag;
• apply to a moldy surface;
• wait until the vinegar dries;
• wash off with water;
• dry the room.

1. Hydrogen peroxide. This substance can be found not in the kitchen, but in the first aid kit. Peroxide is a wonderful antibacterial agent that will cope with small colonies of mold, but in an advanced case it will not be able to help. Peroxide is suitable for processing tiles, concrete, bricks, as well as rubber, plastic, furniture in the bathroom.

It is worth remembering the slight bleaching effect of peroxide, so dark plastic surfaces should not be treated with this agent. The use of peroxide is the same as that of vinegar.

When working with a concentrated peroxide solution (more than 3%), be sure to use gloves, as without protection, the skin of the hands can be burned.

I also want to list other improvised means to combat the scourge. So, how to kill the enemy:

• bleach for linen;
• baking soda;
• an aqueous solution of ammonia gas (ammonia);
• any chlorine-containing household cleaner;
• iron or copper sulfate (100 g per bucket of water);
• tea tree oil;
• boric acid.

Almost all of the listed substances (except chlorine bleach and creosote) are only suitable for removing small colonies of the fungus, since more aggressive agents must be used for an advanced case.

Professional antiseptics

Undoubtedly, "grandmother's" methods are good, but it is special antifungal agents that allow you to deal with the problem on a professional level. In addition, the use of special solutions is a preventive measure to prevent the appearance of unwanted guests in the bathroom in the future.

It is necessary to fight comprehensively, because disputes are in the air. Therefore, it is important to use an aerosol with the solution. You can find and purchase antifungal agents in hardware stores, building supermarkets, or order them on the Internet.

Now I will tell you how to wash the mold, namely, what specialized tools I have met in my practice. So, I want to highlight 5 items:

1. "Anti-fungus" from DEZI. It comes in the form of sprays or solutions.
2. "IZOCID" from "Ukrepservis". An excellent antiseptic, but it costs a lot.
3. "DALI".
4. "Anti-fungus-anti-mold" from "Arel +". Cheap antiseptic, accessible to everyone due to the low price.
5. "MIL KILL" from "Stenotek". An effective tool that is safe for humans.

Prevention

Preventive measures are the key to a successful fight against the enemies of the bathroom

No remedy is able to stop the problem of mold forever. In comfortable conditions for him, the disease is able to return and progress again. I present to your attention practical tips that will help prevent the reappearance of fungal foci:

1. Regular ventilation of the bathroom.
2. Plumbing must be in good condition.
3. Pipes must be well waterproofed.
4. Installing a good heated towel rail.

1. If there are cracks on the wall - you need to remove them.
2. The ideal solution for the bathroom is to install underfloor heating.
3. Regular cleaning of ventilation is a guarantee of the absence of excessive moisture.
4. Use of waterproofing coatings and waterproof materials.
5. It is advisable to use another room for drying clothes.
6. There should be no water in the glass for toothbrushes, as their legs are easily covered with black mold.

These are the rules that will allow you to forget about the blooming walls forever. By following them, mold in the bathroom will never bother you again.

Conclusion

I really hope that my tips on how to remove the fungus in the bathroom and what tools to use for this helped you make your bathroom clean, without a single dark spot of mold. Do not forget about preventive measures, thanks to which disputes will not be able to germinate.

Watch the video in this article to learn more about this topic. Write your questions in the comments, which I will be happy to answer. Let there be no unwanted guests in your house!

Anton Tsugunov

Reading time: 6 minutes

Fungus or mold in the bathroom is a common problem for apartment owners. The appearance of a black, gray or greenish coating on tiles or joints with a characteristic musty smell indicates that it is time to take urgent action. Why is it so important and why is the fungus in the bathroom dangerous? The fact is that mold not only spoils the appearance of the room, but also negatively affects human health. Its spores cause allergies and bronchial asthma, provoke skin rashes, headaches, nosebleeds and coughing fits. In this regard, it is advisable to start acting immediately after you have discovered the first signs of the fungus. We offer you the most complete information on how to get rid of mold in the bathroom at home.

Causes of mold

It is impossible to prevent mold spores from entering the apartment, since they easily spread through the air, settle on clothes and shoes. However, the fungus does not live in any conditions; for its development, a temperature of at least 15 degrees is also necessary. Therefore, a bathroom for mold is an ideal place to live.

Attention! Of particular danger is black mold in the bathroom. It produces compounds that are toxic to humans and destroys everything it touches. First of all, wood, drywall, and plaster suffer from black mold.

Development is driven by the following factors:

• insufficient;
• education on cast iron pipes;
• low temperature of the bathroom walls associated with its angular location;
• leaking pipes or faucets that increase humidity;
• damp towels;
• clothes that are regularly hung out to dry.

Mold Prevention

To prevent mold in the bathroom from bothering you, it is very important to remove the causes of its occurrence. If this is not done, all the means that you use to combat the fungus will be wasted. In order to succeed in your attempts to remove mold in the bathroom, take the following measures:

• organize in the bathroom;
• replace cast iron pipes with modern plastic;
• check the operation of the heated towel rail and replace it if necessary;
• refuse to dry clothes in the bathroom by equipping a dryer in another room or on the balcony;
• identify and repair all leaks;
• if condensation forms on the walls due to the poor location of the bathroom, purchase a dehumidifier.

Mold control products

Special tools for removing the fungus are sold in hardware and hardware stores. Many of them are toxic and have a pungent odor, often the main active ingredient is chlorine. Consider effective, but safe for health means.

• "Anti-fungus" - will help remove mold in the bathroom from different surfaces. With the help of this drug, you can prevent the appearance of mold during repairs by adding a small amount of the product to the glue or paint.

• "Izotsid" - Ukrainian drug for disinfection of wooden, concrete and stone surfaces. In addition to mold, it can fight other types of microorganisms.
• "MIL KILL" - suitable for surfaces with a microporous structure.
• "Dali" - a powerful antiseptic, allows you to get rid of the fungus, can be used as a prophylaxis.
• "Alpa Fongifluid" - a tool in the form of a spray with fungicides, will help remove mold from any surface, from drywall to ceramic tiles.
• Olimp Stop Mold is an effective domestic drug that is absolutely harmless to humans.

To combat mold, some household chemicals are also successfully used:

• Chlorine bleach type "Whiteness". To remove fungus in the bathroom from ceramic tiles, you can use a concentration of 1:10. For plastic panels, the concentration should be lower - 1:20, otherwise the chlorine will simply corrode the plastic.
• Bleach "Vanish" or its analogues, which are called oxygen. They are not as aggressive as "Whiteness", but also help to get rid of mold.

Important! When treating surfaces affected by mold, you need to protect yourself with gloves and a respirator that will prevent harmful spores and aggressive chemicals from entering your skin and lungs.

Folk remedies for fighting fungus

Many people prefer to fight mold at home with the help of folk remedies, which will help get rid of the fungus no worse than specialized preparations.

• Copper vitriol. In 1 liter of water, 10 g of powder is diluted. A brush is used to apply the solution. The substance is poisonous, so it is necessary to use protective equipment for the skin of the hands and respiratory organs.

• Vinegar soda. You can fight the fungus with the help of simple improvised means. Baking soda is applied to the tile and the joints between it, vinegar is sprayed with a spray bottle. After the foam settles, the area is washed with water and detergent.
• Tea tree oil. One teaspoon of essential oil, added to a glass of water, will successfully help to remove the fungus in the bathroom. It is most convenient to spray the mixture with a spray gun, the product does not need to be washed off.

• Bura. One glass of powder is dissolved in 2.5 liters of water, a brush is dipped into the resulting solution, with which the mold is removed. It is not necessary to rinse the surfaces after treatment; after drying, the borax solution will serve as protection.
• Hydrogen peroxide. A 3% peroxide solution can be poured into a spray bottle and treated with moldy areas. After 10 minutes, wash the surface with soapy water.
• Anthracene oil - will help to get rid of the fungus for a long time, but has a persistent unpleasant odor.

Elimination of mold in the seams between the tiles

If mold has appeared on the surface of the tile, it is enough to treat its surface with one of the above means. But getting rid of the fungus that has settled in the seams between the tiles can be very difficult.

To get started, try the following: dilute 2.5 tablespoons of soda in a glass of hot water, after dissolving the soda, add 1 tablespoon of washing powder. Apply a soapy solution to the seams, it is most convenient to do this with an old toothbrush. You may have to make an effort to remove traces of the fungus and even repeat the procedure.

After drying the joints, evaluate the effect: if it was not possible to completely clean the joints, the fungus will continue to spread. In this case, to get rid of it, you will have to re-embroider the seams using deep processing. You need to do this in the following sequence:

1. Clean all grout from the seams.
2. Treat the seams with copper sulfate.
3. Fill them with new grouting material with the obligatory content of antiseptics.

If mold reappears

In the event that you removed all the mold from the surface of the finish and took all measures to prevent its reappearance, but after a while the fungus in the bathroom again makes itself felt, most likely the spores have penetrated under the finish and the fungus grows there. This happens when the necessary antiseptic treatment was not carried out at the repair stage. To eliminate all pockets of mold, you will have to carry out cosmetic repairs in the bathroom with a complete replacement of the old finish.

1. The old coating (tile, panels, paint) on the affected area is dismantled.
2. If necessary, remove the plaster.
3. The area must be cleaned with a detergent and treated with an antiseptic.
4. After drying, the antiseptic is applied again.
5. The surface is thoroughly washed with water and dried with a building hair dryer.
6. A primer with an antiseptic additive and a waterproofing mixture are applied to the wall.
7. Now you can start finishing, not forgetting to treat all seams and joints with a water-repellent sealant.