How to disguise heating pipes in a private house. How to hide heating pipes in a private house and apartment - ways to disguise and decorate. How to hide a heating pipe in a private house or apartment using a hidden gasket in a wall or floor
In any room, after the repair is completed, the pipes will look somewhat foreign. Therefore, many prefer to mask them during repair work. The use of drywall and other modern finishing materials greatly simplifies this work.
Such a solution will allow you to improve the appearance of the room and successfully close the unpresentable heating system.
The modern construction market offers us a wide variety of materials. Almost all of them can help you disguise heating pipes and make the room more attractive.
Today, the following materials are most often used to close the heating system:
- drywall. Today, they are most often finished with interior spaces, which allows you to create a unique design of rooms and complex structures. You can close the pipes with drywall very easily and quickly, and the appearance of the disguise can be adjusted to any interior;
- laminate or MDF. Allows you to give the design a similarity with a tree and will be a great addition to any design;
- Chipboard. It is used somewhat less frequently than the two previous options, but at the same time, the material costs a little less;
- plywood. Its lightness and strength also make it possible to successfully close heating communications;
- wood. It will be in harmony with the furniture present in the room. Allows you to mask pipes even in the most inaccessible places;
- plastic. The popularity of this material is almost on par with drywall. It makes it possible to give the camouflage structure any shape and appearance.
Note! When choosing a material, be guided by the interior of the room so that the disguise is the most successful.
All these materials will help to quickly and effectively sew up heating pipes and give your room completeness and beauty.
Disguise options
To date, there are several ways to close the heating system in a room.
Ways to hide heating pipes are as follows:
- special decoration of pipes. Allows you to disguise pipes as decorative elements with minimal effort. Here the hiding option depends on your imagination. The pipe can be painted in an original way, wrapped with twine, etc.;
- hiding in the floor or wall. Allows you to drown heating pipes in the floor or wall, as a result of which they become almost invisible;
- construction of a special box. It makes it possible to hide the heating system in a practical and functional way and disguise it as a continuation of shelves and/or niches.
The choice of method depends on the size of the pipes, your capabilities and the desire to create more complex and time-consuming structures.
Making a drawing
When choosing a masking method using a box or recess, it is imperative to draw up a work plan. Otherwise, you risk not getting the desired result.
We draw up the drawing as follows:
box drawing
- we put on paper the perimeter of the wall, near which we will build a box or where we will sew pipes;
- determine the dimensions (depth, height and width) of the niche;
Note! The metal frame should not come close to the pipes. Leave about 3 cm between the heating system and the profiles.
- indicate all the attachment points of the profiles.
With such a drawing, it will be much easier for you to understand how many materials you will need, as well as to assess the scale of the work.
Required tools
In order to close the heating pipes in a room with a drywall box, you will need the following tools:
- perforator;
- drill with a set of drills;
- level;
- pencil and tape measure;
- metal shears and a drywall knife.
With such a set of tools, you can carry out all the necessary actions with high quality and be satisfied with the result.
Getting ready for work
Preparation in this matter is almost a fundamental factor for the successful outcome of all work. Consider what preparation should be carried out when forming the box. This stage includes the following operations:
Preparation for work
- inspection pipes for leakage. If this is not done, then in the foreseeable future it is quite possible to get a small "waterfall" in the room. If possible, it is generally desirable to replace old pipes with new ones;
- it is recommended to put special casings on pipes (especially metal-plastic ones). They will help to avoid heat loss;
- we remove all the old finishes from the walls and floor in the place of the planned work;
- prime the walls. It is best to use solutions that prevent the development of mold and mildew;
- we apply markings on the floor and wall according to the drawing.
After completing the preparation, it remains to take up the tool and proceed with the direct installation.
Installation of the intended design
Here we will not consider decorating heating pipes, as this is a separate topic for discussion. Let's dwell on two ways of hiding heating.
Any option for hiding in a wall or floor involves the following steps:
Hiding pipes in the wall
- cut holes in the wall or floor. Their size should accommodate both pipes and mortar;
- we place pipes there, which were previously wrapped in casings;
- we make holes in certain sections of the wall / floor and fasten the brackets to the dowels. This will securely fix the pipes;
- we lay all communications with a solution.
Note! Avoid blocking fittings.
As a result, you will get a completely concealed heating system.
When creating an external box or false wall, you must first make a frame from metal profiles:
- we apply a guide profile to the markings on the floor and drill a hole in it;
- then we fasten it to the dowels;
Note! First, we derive the structure along the perimeter, and then insert the transverse jumpers into it.
- install the profile to the wall;
- when the perimeter is mounted, we attach rack profiles to the guides, which will play the role of jumpers and give the structure additional rigidity;
- We fasten the profile to each other with metal screws.
box frame
After the entire frame has been eaten out, we begin to sheathe it. Here we will focus on drywall in detail.
Proper sheathing of the frame with plasterboard sheets involves the following procedures:
- put markings on the sheets. So you can cut pieces of the size you need;
- using a drywall knife, we cut the sheets and get the pieces of the required size;
- fasten them to the frame with self-tapping screws. Remember, the edges of the sheet should fall in the middle of the profile.
After completing the installation of the structure, you can proceed to the final finish.
Final stage
At this stage, in order to give the box an aesthetic and beautiful look, you need to do the following:
- we cover all the joints of drywall sheets with sickle;
- we cover with rough putty all the joints and areas of drywall into which the screws were screwed;
- after the putty dries, we clean all the irregularities with sandpaper;
- Apply the final layer of putty.
After that, the box can be painted, wallpapered or decorated with decorative stucco. Remember that the outer design of the box should match the overall interior of the room.
As you can see, pipes can be closed in various ways. The main thing is that everything looks extremely appropriate and harmonious.
Content
Hiding heating pipes
Quite often, heating pipes do not harmonize with the interior design. Although in comparison with the steel ones used not so long ago, they look more attractive. Therefore, a natural question arises, how to hide heating pipes in a private house or apartment. This must be done in such a way that there is access to the main wiring nodes, where the sliding fittings (faucets, valves) and measuring sensors are located.
Options for masking heating pipes
The issue of masking pipes involves several basic solutions.
There are several options:
- mount systems in walls, floors;
- conduct wiring on top and close it with stretch ceilings;
- mount drywall boxes;
- use a special plastic plinth for heating pipes;
- close them with a decorative screen;
- to beat with the help of design techniques.
Installation of a hidden heating system in the wall When installing a hidden heating system in the floor and wall, you must first make a project, or draw a wiring diagram on a scale. That will make it possible in emergency cases to quickly identify the place of leakage, and dismantle a specific emergency section.
In boxes made of GCR boards, it is necessary to provide special viewing windows (revisions) for access to the main nodes.
If you plan to mount pipes in a plinth, then you must first determine its dimensions in order to place the track there.
With a box of different materials
Most often, the box is made of drywall. It is easy to decorate it with the same materials as the walls: it can be wallpaper, textured plaster, paint. Thus, they merge with the general decor of the walls, do not dissonate with the overall design concept of the room.
How to close the heating pipe if it goes along the perimeter of the room? This arrangement is often found in private housing construction. Of course, it is better to provide special niches at the design stage. But often, when they make repairs in old houses and change the heating system, they cut off the old wiring, and in its place they install a new plastic one so that the pipes are located along the walls and floor.
The best solution in this case would be a special plastic plinth. It looks neat and is easy to install. The kit includes external and internal corners, plugs and docking strips. First you need to determine the location of the pipes:
- around the perimeter, at the top of the ceiling;
- above the floor;
- on the wall.
Special plastic plinth for hiding pipes Then choose the skirting board model. Depending on it, the wiring is made so that it fits in a plastic box. It is a wider version of a regular skirting board with grooves for pipes. They are selected according to the color of linoleum, laminate. Therefore, it will not clearly stand out against the background of the flooring.
Disguise pipes running along the wall should be in rectangular boxes of various shapes. They are made of plastic in different colors and sizes. If you match them to the tone of the main walls, then the decoration and disguise will merge. The box will look like one of the decorative elements.
If the heating pipes in the apartment run along the perimeter of the ceiling, then in this case both boxes and a wide ceiling plinth (fillet) are used.
In walls or floors
How to close the heating pipes so that they are not visible at all? A hidden piping that matches the design of the rooms is the ideal solution. A pipe in a wall or floor should be closed only if certain technological requirements are met.
Among them:
- The minimum service life of the material is at least 40 years.
- Closing metal pipes is permissible using grades that are resistant to corrosion (copper, high-alloy steel).
- For plastic, metal-plastic products, hidden wiring is allowed, provided that the walls of the product are vapor-tight (confirmed by appropriate marking). It is desirable that the system withstand pressure up to 4.5 bar.
- The optimal connection for polymer products is molded fittings. This is the most reliable way.
- Valves, sensors, controller must not be hidden in walls and floors, without the possibility of technical access to them. Therefore, the contour of underfloor heating (comb) and distribution units are mounted in special boxes with revision.
Floor piping The wiring for underfloor heating made of plastic is quite vulnerable, so the pipe may be damaged during installation. To avoid leaks, before pouring the concrete screed, the system is tested under pressure and temperature slightly higher than the operating values.
In order to close the pipes in the wall, a strobe is made, where they are fixed with the help of special clamps. The size of the niche should be slightly larger than the diameter of the pipe, taking into account linear expansion. It is necessary to lay the pipeline in the wall in a protective casing, and in order not to lose heat, the voids are filled with mounting foam.
The use of drywall
Often in central heating systems, the wiring and heating riser run along the walls where the windows are located. One of the possible options to hide the pipes is to sew up the entire wall with drywall on the profiles. As a result, the space narrows somewhat, but there are no protrusions. Radiators are slightly recessed into the wall and covered with decorative grilles (screens) sold in hardware stores. Depending on the design of the apartment, it is necessary to choose a grate that matches the interior. They are produced from different materials: wooden planks, perforated metal, MDF panels, glass.
Making a drywall box The next way to close the pipeline in a multi-storey building is to make a box at the level of the window sill. Get a decorative design. This idea can be developed by combining the window sill and the box with a common countertop. Then they will look like a single element in the ensemble of the room. This solution is especially appropriate for the kitchen.
How to decorate a heating pipe in a room if it is unsuccessfully located, that is, in the most visible place? In this case, the method used by many designers will do. The pipe is hidden in a decorative drywall box. The result is a ledge on the wall. The design is beaten with shelves with highlights from GKL of various configurations. It turns out an element of decor that naturally fits into the design of the room.
Decorate
Sheathing heating pipes with GKL sheets is not suitable in all cases for a number of reasons. For example, a room with a small area, a drywall box further reduces it. Bimetallic aluminum radiators have a neat appearance, so they are left open, only the riser pipe is hidden. For decoration, various design techniques are used. The choice of decor depends on the stylistic decision of the room.
The easiest way is to hide the riser, located near the window, among the curtains. If the pipe is shifted a little further than the window, then hang another canvas, grab it with interesting hangers - which will complement the aesthetic appeal of the window decoration.
For "home" styles, such as Provence, shabby chic, country or eco-style, pipe sheathing with jute ropes is suitable. In addition to them, light hanging shelves are attached, interconnected by the same twine, decorated with artificial plants.
Bamboo decoration Bamboo is used to decorate pipes in a room decorated in the style of oriental minimalism. The trunk of this tree is hollow inside. If it is divided into two parts along, then it will not be difficult to hide the riser in it. Connect the halves with the same jute rope.
In the children's room, the following techniques are used - they sheathe the heating riser with bright textiles, bows, ribbons. They paint it in cheerful colors, hang soft toys, airplanes, decorative butterflies on it.
In the kitchen, the pipe is used as a basis for decor, and decorated with replicas of vegetables, fruits, amulets.
The decision on how to decoratively turn an ordinary riser into an interior design element depends on creativity, imagination.
Laying pipes in the ceiling
How to hide heating pipes if the wiring goes under the ceiling? They are fastened using plastic clips fixed with dowels. The easiest way to close the wiring is to hide it with a stretch ceiling. It is quite easy to dismantle, in case of an emergency. In addition, stretch ceilings can hold leaking water for some time. Another option is to run wiring around the perimeter of the ceiling and sew up the pipes with a drywall box. Taps and plugs are taken out of the main wiring. For them, a separate niche is mounted or transferred closer to the radiators.
Installation of heating pipes under the ceiling When installing wiring under the ceiling, it is necessary to make a slight slope, install an air exhaust system in the upper part and mount an inspection window.
It should be concluded that hiding the pipes is quite easy. Decorating techniques help to make them as invisible as possible.
Agree, even the most original design solution for the interior design of a bathroom can come to naught due to unsightly engineering communications. You can save the situation by skillfully disguising unpresentable elements.
At the same time, it is not necessary to be a virtuoso in the construction business - it is enough to choose finishing and building materials, prepare tools and stock up on free time.
We will show you how to hide the pipes in the bathroom, while providing access for system maintenance. After studying our instructions, you can independently transform the bathroom, saving money on the services of plumbers.
The first thing to do before you start sealing the pipes in the bathroom is to decide on the appropriate material.
When choosing a material for hiding pipes in the bathroom, it is not entirely correct to be guided by the purely aesthetic component of the products.
Criteria to consider when choosing a material:
- lightness. So that the design does not clutter up the already limited space, it is necessary to select materials for fixing which there is no need to build heavy frames. You can use ordinary wooden slats or metal profiles.
- moisture resistance. High humidity in the bathroom is a common occurrence. The materials used in its arrangement will certainly be influenced by it. Therefore, preference should be given to those options that do not absorb moisture and do not deform when it settles on the surface.
- Sustainability to the effects of chemicals. Without the use of household "chemistry" to maintain cleanliness in the bathroom is quite problematic. During general cleaning of the premises, all vertical and horizontal surfaces are subject to processing. Therefore, the materials used for their lining must painlessly endure direct contact with household cleaning products.
To hide communications in the bathroom, decorative MDF boards, plastic wall panels, sheets of moisture-resistant drywall are excellent.
In the cladding of wall structures, decorative hardboard slabs covered with a layer of melamine laminate and 3D gypsum panels will look interesting
A variety of textures of gypsum 3D panels popular in recent years can imitate wood, brick, mosaic and create fancy patterns on the walls.
An important point: regardless of the type of facing material, before closing the pipes, you should make sure that they are reliable. By closing a pipeline that has defects, there is a high risk that in the near future it will be necessary to disassemble the structure in an emergency manner.
Possible ways to disguise
There are many options that suggest how you can hide the pipes in the bathroom. They differ in the form and purpose of the erected structure, as well as the types of materials used. We offer to consider the most popular among them.
Image gallery
The steps for masking communications during the installation of a hanging toilet in a mixed bathroom will be presented by the following selection of photos:
Image gallery
If desired, the box can be completely brought out to the level of the sink. Such a solution will make it possible not only to hide all unsightly communications, but also to provide additional space for storing bottles with household chemicals.
To cover the inspection hatch, it is convenient to use ready-made plastic doors, which are on sale in a wide range of colors and sizes.
The arrangement of an inspection hatch is a necessary condition if the part of the pipeline to be decorated is equipped with valves, meters or any other equipment items.
Masking pipes with tiles and mosaics looks appropriate in bathrooms, especially if they are made of the same material.
Method #3. Closing with plastic panels
Decorative plastic panels are a simple and at the same time inexpensive option for hiding communications. A wide variety of types, colors and design options presented on the construction market allows you to create a design that will harmoniously complement an already equipped interior.
Structures made of plastic panels are also convenient in the sense that all their elements are interchangeable - this greatly simplifies the task if it is necessary to partially dismantle the structure
The only drawback of plastic panels is the low fire resistance. Although many manufacturers guarantee self-extinguishing products, they are no less afraid of smoke than an open fire. Therefore, in the bathroom, the pipes of which are decorated with plastic panels, you need to beware not only of fire, but also of ordinary smoking.
Installation of plastic panels is carried out on a pre-assembled frame, the basis for the manufacture of which are all the same metal profiles. Before sheathing the frame, first a starting molding is attached to it with screws.
Often, in the construction of a frame for fastening plastic panels, they prefer to use lumber. They are easier to cut and process than a metal profile:
Image gallery
When making repairs in the bathroom or another room where the pipes are located, you really want to get rid of their unsightly appearance, which spoils the entire design. How can you bring this place into an aesthetically acceptable form without much difficulty? This is the only way to transform the room. Several materials can be used to make it. Which of them is more convenient for work and is more suitable for the design of the room, it is up to the landlord to decide.
It must also be said that the box can not only close numerous pipes, but also become a design element of the room.
The box can be designed and built on your own, or you can purchase ready-made options that are not so difficult to find today in hardware stores. The main thing is to correctly calculate all the dimensions of these parts.
Having considered different options for this element, you may choose the right one for your room, or ready-made ideas will lead you to your own exclusive option.
- perforated;
- metal;
- plinth;
- from drywall;
- plastic.
Moreover, all these types of boxes can perform a decorative function!
What can the box be built from and how can it be decorated?
- The first, most famous option is a box constructed from drywall, fixed to a metal profile or wooden bars.
- The second way to close the unsightly appearance of pipes can be called brickwork. However, this method is not always possible to implement, since it is more time-consuming compared to others.
- The third is a box made of plastic lining, which is also fixed to a metal or wooden frame.
Lightweight plastic box
- The fourth way can be called ready-made plastic boxes, which are simply installed around the pipes and fixed to the wall on metal profile frame.
- And another way that can be applied is to hide the pipes in the wall by arranging a box inside it. But this can be done if you are carrying out a major overhaul or installing a new heating circuit.
- Heating radiators can be closed with a plasterboard construction or a decorative screen.
It is very important to remember that no matter what the box is made of, it is imperative to leave windows in those places where valves or taps are installed - for easy access to them in emergency situations.
Now you can consider in more detail the most popular ways to close heating pipes and radiators.
Plasterboard or plastic box
- The first thing to do if it is decided to close all the heating pipes is to take measurements and mark them on the walls. They can be guided by purchasing the necessary materials.
An important condition for marking and arranging the box is that the structure should not come into direct contact with the pipes - the distance between them should be from two to three centimeters.
- Frames for drywall and plastic boxes are made using the same technology. Accordingly, the materials for them will also need the same:
- metal profile or wooden bars;
- material for sheathing (plastic, drywall or wooden lining);
- self-tapping screws and dowels;
- measuring instruments;
- screwdriver;
- construction knife;
- scissors for cutting metal;
- a cutter is a tool with which a metal profile is fastened.
- The next step is the preparation of frame parts, a profile or wooden bars are cut.
- Next, the frame is mounted on the walls with dowels. If wooden blocks are used, you must first drill holes in them, otherwise when they are fixed to the wall, they may crack.
- When arranging the frame, one should not forget about the holes for free access to the taps. To fix the doors on them, a frame is built for the window.
- In the manufacture of vertical frames that have a large height, for example, from floor to ceiling, for rigidity, jumper ribs are arranged in two or three places.
- Between themselves, the bars are fastened with self-tapping screws, and the metal profile - with the help of cutter or the same screws. For metal, special fasteners are provided, with a sharper end.
- Next, dimensions are taken from the arranged frame, and drywall or lining is cut out along them. If subsequently drywall is not planned veneer to ceramic tiles, then when preparing it, semicircular chamfers are removed from the edges.
- Drywall is fixed to the frame using the same self-tapping screws.
- If the cladding is made of lining, it is nailed to the wooden frame with small nails, and special metal holders (brackets) for lining are used. Therefore, if lining with a clapboard is planned, it is better to use wooden bars for the frame.
- A difficult moment is the decorative closure of pipes located in the corner. It is best to close them with a frame arranged in the form of a box. Do not try to make it with a cut corner - you will only complicate your task, and it will hardly look neater.
Pipes in the corner are beautifully "packed" in a plastic box
- After the installation of drywall is completed, its corners must be reinforced with a special sickle tape, which is applied to the putty. Putty also needs to close the heads of the screws.
- After the putty has completely dried on drywall, you can lay tiles, paint, or simply stick wallpaper on it.
Finished plastic box
In some cases, a plastic box is perfect for closing the heating pipes, which can be embedded in the wall or fixed on it. If the heating is being re-laid or arranged in a new house, this option will be a great way to hide all the pipes.
- On the wall, using a long ruler, markings are made along the entire path of the pipes.
- Next, a wall is cut with a perforator according to the markings, to the width of the box. It should freely enter this niche, both in width and in depth. It is also necessary to provide for the distance for applying putty.
- Further, the strobe is cleaned of dust, wetted and thickly smeared with putty.
- A box is installed in the intended place and additionally fixed to the wall at several points using a dowel.
- The pipes are laid in the box immediately after the putty has completely dried in the wall.
- After connecting and checking all communications, the box is closed with the cover-casing included in the kit.
- When finishing the walls, their coating can be aligned with the protruding part of the box, especially since it will have to stand out by no more than two to three millimeters.
Installing pipes in the box will allow you to control the reliability of communication connections (joints), and in an emergency, the cover can be easily removed and repair work can be carried out.
Another way to use the finished box can be to fix it on the wall, also before starting the heating installation.
Heating pipes running along the wall near the floor can be covered with plastic or wooden skirting boards specially designed for this purpose. They are available in different widths and will help hide several pipes at once.
We close the radiators in the box
Since radiators also belong to the category of pipes, you need to consider several options for closing them with a screen box. Batteries do not always have an aesthetic appearance, and since the pipes suitable for them are neatly hidden, it is worth transforming these elements of the heating system, which immediately catch your eye.
If earlier you had to come up with decorative screens from various improvised means, today such designs can be found in stores for every taste and for different interiors.
This option can become exclusive, since such a backlight can be placed inside any screen for radiators. The light installed inside can have different shades and complement the evening room, or even become the main element of a romantic evening.
Such screens will look just as good during the daytime hours - their wicker surfaces will become a decorative decoration of any room.
A more modest and discreet screen that emphasizes the neatness of the room. It goes well with the window sill and merges with it into one. This version of the screen box hides not only the unaesthetic battery itself, but also the space around it.
Box - cabinet
Not every room can afford such a box-cabinet, since it is quite voluminous. It fits perfectly into a room with a large area, and its top panel may well serve as a stand for kitchen appliances or flower pots. The aesthetic appearance of the box will decorate any interior, and most importantly, it will reliably hide the whole unsightly picture around the batteries.
Assembly of a box for pipes and a radiator - video tutorial
One tip that will definitely come in handy for those who decide to close pipes and batteries. Start the procedure with accurate measurements and calculations, so as not to make a mistake with the purchase of material and not spoil the walls. And if this work seemed difficult to you, then you can always ask for help from the masters who will perform it accurately and accurately.
