Garden path path. Where to lay paths in the country and in the garden - photo. Connecting house and outbuildings

06.11.2019 Heating

Why do homeowners choose to put a lawn walkway design in their yard? The main reason is to provide better access to hard-to-reach corners, to create passages to the flower beds. Landscape design of the path - 65 photos of ideas on how to arrange paths to the house. The path will prevent damage to flowers, vegetables and other plants due to the clearly defined edges.





The paths and walkway design are also perfect for redirecting purposeful bare feet away from your manicured flower beds and beds. If the shortest path to the front door is straight through a manicured front yard, then you will definitely need a footpath to protect the yard from any damage.

Landscaping a walkway will add dynamism to your landscape as well as create a calming, welcoming effect. When it comes to building a walkway, you have a wide range of options, both simple and complex. It all depends on your time, investment and the effort you are willing to put into it. Here are some possible options. Photo track design:





Track design - choose material

Design of garden paths made of concrete slabs. Pretty simple approach. Purchase concrete slabs about 45 centimeters in diameter. Lay them directly on the ground along the path, about two steps apart.

The interpretation of this method can be a small depression in the ground before laying out the stones. Dig holes so that the stone protrudes about 1.5 centimeters above the ground. This will allow you to easily mow the grass near the walkway, as well as trim the plants that will inevitably grow over time.

Cobblestone and gravel for site path design. Solid path of pebbles or gravel. In this case, the need to trim the plants will simply go away. Also use cobblestone or gravel in addition to your flagstones. Whichever option you choose, be sure to study the landscape layer before laying out cobblestone or gravel. This can affect water runoff (eg after rain) or weed control.

Mulch walkway design. Another solution is a walkway design made entirely of mulch, or a combination of mulch and rocks. True, mulch tends to get a little dirty, especially on rainy days. But at the same time it is good and affordable. garden path photo design:





If you decide to use mulch, there are several ways to give your walkway a boost. For example, finishing the edges with wood or plastic will give the walkway a more austere look. Any garden path design detail that adds character to your paths and paths is easy to buy, inexpensive, and can be installed with just a hammer.

If your passage is located on a slight slope, then be sure to consider pine needles as an addition to the mulch. They stick together well. Therefore, during gusty winds, the mulch will better maintain its appearance.

Designing garden paths with pieces of bark is another great opportunity to diversify your garden path. Today they come in different colors: red, black, brown. Pieces of bark practically do not fade in the sun.



Walkway landscaping

The landscaping of the walkway is surrounded by plants and trees that provide beauty and protect privacy. They also help your pool blend in seamlessly with its surroundings. Grow tall plants that will form protective screens and hide your poolside privacy from prying eyes for sure. But you need to choose vegetation wisely. It is important to think about how big this or that plant will grow. It is also worth considering that large trees create shade and shed a lot of foliage! It is this factor that leads to rotting of water. garden path photo design:

If your pool assumes the presence of salt water, then take this factor into account. You will need to select plants that are salt tolerant. Ilex or juniper might work well. The trees on the south side of the pool are grown to create heady cool shade. But do not allow the entire pool to be completely in the shade. Then you will have room for the sun on cloudy days.

Avoid fruit trees near paths, otherwise the design of the path to the house will suffer: not only because of the fall, but also because they attract bees. For the same reasons, you should also refuse flowers near the pool. It is worth knowing that plants should be planted at least 2 meters away from the structure, so it will be much easier to keep the pool clean.
But an even more important criterion for choosing vegetation is their root system. Some trees can damage your pool with their roots over the years, and landscaping a walkway will help you move freely throughout your property.

An irrigation system is critical to keeping your yard looking its best. Proper water management is a balance between conserving water and providing the amount of vegetation needed for healthy growth. Every homeowner should pay attention to the attractiveness of the landscape in his yard, and make sure that the appearance designed by the designers will not change.

Walkway design to the house

One of the most important elements for preserving the landscape and design of your garden paths for many years to come is a well-functioning irrigation system. This is especially true during dry seasons. There are many types of irrigation systems. The most common are sprinkler, rotary and drip irrigation. Photo track design:

Spray system. The most popular form of irrigation for home lawns and gardens. Good for small patio areas. The heads are easily rotated so that the direction of the spray can be changed so that the garden paths do not get wet. Overall, the system is reliable with little maintenance.

Rotary system. Most commonly used to irrigate large areas, and commonly found in stadiums. Rotary systems throw water at a distance of up to 30 meters. Despite the speed at which water is ejected from the sprayer, rotary systems actually eject less water than a spray system.

Drip irrigation for walkway landscaping. One of the most efficient water-storing irrigation systems. Drip irrigation has many advantages over other types of irrigation, including:


Drip irrigation systems use a network of pipes and hoses to slowly and efficiently distribute water at low pressure. This provides less water than traditional overhead irrigation types, and in many cases this slow, steady flow of water results in healthier plant care. Photo track design:

In this article, we will offer some original ideas for arranging original, beautiful and at the same time inexpensive and comfortable garden paths with your own hands, which will become one of the decorations of your house adjoining area or cottage.

1. Gravel, just gravel

Let's start with one of the simplest and least expensive ideas - creating gravel garden paths. The advantages of this option include a wide selection of fractions and shades, as well as the ability to get by with a minimum of cost and effort.

In the case of arranging such a path, you will have to take care of the presence of a curb or other limiter so that the gravel remains within the boundaries of the path

In this case, a fairly large area was covered with gravel between neat flower beds, where not flowers, but vegetables grow.

2. Large stones or slabs on gravel

A slightly more expensive, but also more comfortable and original option is to lay out a path of flat stones or concrete slabs, and fill the space between them with the same gravel.

Large slabs of stone or concrete will become the basis of the path, and so that grass does not break through between them and the path looks more attractive, the space is covered with inexpensive gravel

Stone slabs on gravel can be scattered in any, the most chaotic order - this way the path will look even more unusual

3. Stones and lawn

If you have nothing against green grass, let the lawn grow freely between the flagstones of the path. This combination of greenery and stone will look very natural and harmonious in the garden.

Stone slabs literally "grow" into the green lawn, becoming an integral part of the garden

Why destroy the lawn, if you can create just such a beautiful path, walking along which will be no less convenient than ordinary paths completely tiled

One can confidently say about such a path of massive stone slabs - “made for centuries”. And the moss growing between the slabs gives it a natural look, as if the path appeared by itself.

4. One board, two boards

The result may not be a ladder at all, but a comfortable garden path. Just do not forget to process the wood, which will have to withstand moisture and temperature changes.

It is not necessary to use fairly expensive ready-made boards; you can purchase ordinary pallets that are quite inexpensive. It remains only to disassemble them, process the resulting boards with a special composition and lay out the track

Another plus of such a garden path is that if necessary, it will not be difficult to replace one of the boards.

5. Boards and gravel

It is not at all necessary to lay out a solid flooring from wooden boards. You can use gravel and create a harmonious combination of stone and natural wood.

Gravel between the boards can be poured in different ways - large, medium, small, it all depends on your desire

By the way, with the help of boards and gravel, you can also create stepped paths in areas with uneven terrain.

6. Pebble

An ideal option for those who want to transfer a piece of the sea beach to their garden is pebbles. You can lay out unusual compositions from it or just fill up the track, be sure to take care of the limiters.

A very nice option for a pebble path. Children will especially enjoy jumping from one laid out piece to another - a real playground

It will be nice to walk along such a path barefoot, imagining yourself on a pebble beach somewhere on the Black Sea coast

7. Wooden cuts

If the boards seem too banal to you, or you just recently got rid of a large tree that cluttered up the site, you can use wooden saw cuts to create a garden path. The beauty of natural wood does not need additional decorations, but it will have to be protected from external influences.

Wooden saw cuts can be of different sizes - this combination will look just as good.

Of course, finding large wooden saw cuts will not be easy. However, smaller rounds can also be laid out in this way - on top of each other, in steps

8. Boards and grass

As with stone slabs, green grass can be allowed to grow between planks. Experts note that boards lying on gravel last longer, but your garden will look like a corner of almost untouched nature with lots of greenery.

Old boards on a green lawn are both a retro option and a very natural part of a garden that has retained its natural charm

9. Stone mosaic

This option for arranging a garden path will require a lot of time and effort, but the result will be so beautiful, durable and original that it will pay off all the efforts.

From pebbles, large and small stones, you can create amazing garden paths, real mosaic panels

Such a mosaic is laid out on concrete or sand. If you decide to lay the stones on the sand, you can additionally fix them with wood glue so that the paths last long enough

The process of laying out such a stone mosaic is very painstaking, it requires attention to each pebble.

10. Mosaic from broken ceramic tiles

Everyone who has ever made repairs using ceramic tiles will definitely have unclaimed pieces. Do not rush to throw them away - with the help of a bat or tile cut into pieces, you can create a beautiful and reliable garden path.

From pieces of a wide variety of broken tiles, you can create garden paths that will definitely be one of a kind

From small pieces of tiles, you can create small separate panels

11. Plastic lids

A very interesting option for arranging garden paths. The more plastic covers you have in different colors, the more beautiful and brighter your garden path will turn out.

Plastic is not afraid of moisture and temperature changes, so such covers can be called an unusual, but quite suitable option for creating garden paths.

The only thing that can delay the implementation of such a project is the need to collect a sufficiently large number of plastic caps. Although, if you turn to friends, acquaintances and neighbors for help, it will not be difficult to cope with this task.

12. "Vegetable" concrete slabs

Concrete is a truly versatile material from which you can make amazingly beautiful things. To create a garden path from unusual concrete slabs, you only need cement mortar and an ordinary large burdock, which you will definitely find without any problems under the nearest fence.

It turns out that even a child can make such a garden path! So you can definitely do it

These are the concrete mugs you should get in the end

13. Mold for casting

Special forms for creating concrete garden paths can now be purchased at many hardware stores. With their help, you can arrange comfortable paths throughout the garden or house adjoining area with your own hands.

The appearance of your garden path will depend on the chosen form.

You can add color to the solution and your track will sparkle with all the colors of the rainbow

14. Terrace board

Of course, this option can no longer be called cheap, because a ready-made decking board is very expensive. However, such a track will look not only beautiful, but also respectable, and will last for many years without losing its original parameters.

A deck or deck board walkway is one of the most expensive options.

A deck board made of larch will cost less depending on the type of material

15. Brick

Remember the girl Ellie, who walked with her friends to Goodwin along the yellow brick path? Why not transfer such a fabulous path to your garden by creating a solid and beautiful brick path with your own hands.

You can choose a brick for the path in a different shade, and the process of laying it is similar to paving slabs

The most economical option is to create a garden path from the old brick left after dismantling the outbuilding

16. Paving slabs

It seems that there is nothing original in this idea. Indeed, at present, paving slabs have become one of the most popular options for arranging garden paths. But tiles are different! The diversity that exists today allows you to create original patterns from paving slabs and turn garden paths into a masterpiece of landscape design.

And in this case, the path of paving slabs is surrounded by areas covered with gravel

As you can see, there are many options for arranging garden paths, and you can choose very inexpensive, if not free, options that involve the use of such “improvised” materials as wooden cuts, old bricks and plastic covers. Choose the idea that you like, implement your options and let your paths on the site be the most beautiful!

Stylish and comfortable paths in the garden with your own hands

Paths are an integral part of the garden. Not only the appearance of the estate, but also the convenience of movement throughout the site depends on how they are laid and combined with each other. Therefore, the arrangement of paths and paths is the main stage in the design of the landscape gardening area.

How to plan a track layout

It is best to plan the layout of the tracks during the planning and zoning of the site. This will make it possible to provide approaches to all necessary buildings and zones.

If necessary, in the future, after the appearance of a new building, or a change in layout, you can always correct the route or change direction. The marking should be carried out taking into account all routes, so that a convenient passage is provided to each important element of the garden.

To begin with, you should draw up a site plan and think over all possible objects, including both communication and architectural or design ones. After marking all the routes, it is necessary to determine the width of the track, taking into account what exactly it will be used for.

  • The main path - going from the gate to the house and to the most visited places, for example, a gazebo or a playground, should be 0.9-1.5 m wide. This is necessary not only for the possibility of the passage of two people, but also helps to highlight it visually.
  • Paths of secondary importance (to utility rooms, a bathhouse, outbuildings, recreation areas) - from 60 to 90 cm.
  • For paths going deep into the garden or vegetable garden, a width of 35-50 cm is suitable.

The exact width of the tracks is not given, as it depends on the size of the site and on personal preferences. However, for a large section, it is recommended that each branch of the road be twice as narrow as the previous one. For example, the main one is 1.2 m, then the secondary one is 60 cm, and the garden one is 30-35.

It is equally important that the paths fit perfectly into the overall style of the site. For a landscape-style garden, serpentine paths with gentle turns are best suited. Their width is made the same, and on the steps to the sites or buildings they are gradually expanded.

Landscape style garden design or English garden. Also called Nature Style or Natural Garden, contains irregular and uneven shapes, mixed plantings and planting areas.

In a garden of regular construction, paths are lined exclusively in a straight line, so that they are parallel and perpendicular to each other, fences and walls of the house. A ray scheme or symmetry is also suitable for this style.

For the reader's reference

Landscape style A regular garden is the exact opposite of a landscape style. It may also have the names French Park, Geometric Garden, Garden of regular or geometric construction. Differs in the correct equal forms and symmetry of execution. It is considered the most strict and light style in landscape design.

Materials for paving paths in the garden

When choosing which paths to make in the garden with your own hands, it is important to consider the basic requirements: strength, safety and affordability. What is the best way to make them? And how to determine the required amount of materials?

The most popular are:

  • paving slabs;
  • a natural stone;
  • granite chips;
  • paving stones;
  • pebbles;
  • stamped concrete;
  • concrete plates;
  • bars and saw cuts of trees;
  • terrace board.

Choosing building materials for paving should be based on the purpose of the paths and sites. On the main routes, especially if the house is permanently occupied, a continuous hard surface of concrete, tile or stone is laid. For backfilling the central paths, as well as for paving routes of secondary importance, brick chips, gravel or pebbles are used.

The central paths and porches are paved with the same type of material to give the entire space a stylistic unity. If the area of ​​​​the site is large, you can combine several types of coatings, but no more than 2-3. For laying serpentine paths, it is better to choose elements of medium size - paving stones, clinker, paving slabs.

Before laying the coating, it is necessary to make the base of the track. To do this, they dig a trench, having previously calculated its depth according to the formula: the height of the base layer plus the height of the surface coating. Usually, a 30 cm layer of fine-grained sand and gravel, or crushed stone, is used to create the base. In this case, the sand component should not be more than 50%. The base is laid out in 4-5, approximately equal layers, each one is carefully spilled with water for precipitation and compacted.

Determination of the amount of facing material

In order to determine how much material is required to paving the surface layer of the path, it is necessary to determine the length and width of the future garden path, and then, by multiplying, calculate its total area. For example, for the construction of a path measuring 1.2 by 7 m, about 63 tons of decorative gravel will be required.

This calculation is based on the following data:

  • According to the data from the example, we obtain the coverage area: 1.2 * 7 \u003d 8.4 square meters;
  • For a stable coating, according to the norms, it is customary to take a height of 5 cm;
  • The coverage volume is equal to the coverage area multiplied by the height: 8.4 * 5 = 42 cubic meters;
  • The bulk weight of decorative crushed stone can be obtained from the manufacturer, on average it is one and a half tons per cubic meter;
  • Based on these data, we expect that our track will need 63 tons (42 * 1.5).

You can calculate the amount of sand and gravel for the base approximately, according to the same principle. The bulk weight of fine-grained sand is 1.72-1.8 tons per cubic meter, and fine-grained crushed stone of the M700-M800 brand is 1.41 tons.

Paths in the garden of stone, tiles and bricks: design options

Slab is the most popular material for organizing tracks. Firstly, it is easy to lay out, secondly, it is durable and wear-resistant, and thirdly, it is quite easy to care for it.

The modern building materials market allows you to choose paving slabs for every taste - all kinds of shapes, colors and textures. In order to decorate a large area - a parking lot or a platform near the porch, it is enough to combine 2-3 options by organizing inserts on the main canvas with a diagonal or patterned placement of tiles.

A mosaic or abstract patterns of multi-colored tiles of various sizes will look very unusual and festive. For connoisseurs of natural style, tiles with gaps will be an excellent solution, which, after laying, can be sown with grass or covered with soil.

Do-it-yourself garden paths made of natural stone

Natural materials - basalt, granite, limestone, sandstone allow you to realize the most daring fantasies. With their help, you can make a path of any purpose a real artistic element of the garden. The main advantage of such a coating is harmony and strength. It will not be difficult to pave paths from natural stone, even for a non-professional.

For the construction of walking paths, it is most rational to use full-sawn paving stones - stone blocks that resemble a parallelepiped in shape. And access roads should be paved with chipped paving stones. Irregular flagstone paving, 4 cm thick, looks no less beautiful. It must be selected according to the shape, and laid on a bed of compacted sand or on a sand-cement mixture.

To save money

To save money, you can combine paving slabs, filling the main part of the paving with it, and make stone patterns in the center. For this purpose, a stone of any size left over from construction, boulders of an unusual shape, pebbles and shells brought from a trip are suitable. Brick chips, pieces of marble, granite, and even wooden saw cuts are also useful.

Walking paths in the garden, photo of original coatings using wood

Wood is not the most durable material, but wooden paths look very aesthetically pleasing and original. To ensure that the coating lasts as long as possible, it is treated with special impregnations before laying that protect against moisture and fungi: Drevotex-Anti-mold, Dali, Woodmaster Prof Biosept, Ecodom Bioprof. Such paths are installed only on elevated places where there is no possibility of waterlogging of the soil and stagnant water.

Walking paths leading into the distance of the garden are made of wooden saw cuts with a diameter of 20 cm or a rectangular beam 20x15 cm. The finished bars are laid out on a pillow of sand, covered with gravel on top. The saw cuts are driven into compacted wet sand, as close as possible to each other.

The most durable material for garden paths

More durable and durable paths made of decking boards. It is made of wood or wood-polymer material that is not subject to the damaging effects of weather conditions. Mount the coating on logs laid on a leveled surface. Fasten the boards to each other with screws or clips.

Logs are selected based on the selected terrace board. If wood-polymer materials are used, the logs should also be made of composite materials, since the service life of the parts of the structure must match. The surface under the logs can be made of various materials: paving stones, crushed stone and sand, sandstone or concrete. The main condition is a prepared flat surface, with a slight slope (1.5-2%) from the house for water flow.

Logs are laid at a distance of 40-50 cm, and in places of increased load 20-30 cm. Also, they should not be laid close to curbs and walls, the recommended distance is more than 20 mm. After that, the deck board is fixed. If completely natural materials are used, mandatory treatment with special oils that prevent decay is necessary.

Outcome

A beautifully laid out central path or an originally decorated winding path leading from home to your favorite vacation spot, pond or garden can not only emphasize the merits of plant compositions, but also become a spectacular garden decoration. Using the advice of our experts, you will make beautiful and comfortable paths in the garden with your own hands.

Making paths in the country can greatly affect the design of the site. Therefore, it is so important to pay attention to creating beautiful tracks.

Moreover, you can make an interesting path from various materials, for example, a brick path will look elegant, and a path made of round logs of natural wood will add mystery to the country design, a path made of river pebbles looks stylish, emphasizes the original design and makes it brighter path made of plastic corks.

In addition, there are also ready-made removable panels that can be laid out every year to your liking.

country path project

Before you start laying the path, you need to create a terrain plan in which to designate all the buildings, garden plantings, flower beds and schematically designate the path. Ancillary objects, such as an irrigation system, must also be present on the drawing.

When creating a plan, it is necessary to take into account all the nuances, so you should be as comfortable as possible, getting to any place in the garden. In addition, you must take into account the fact that you need to walk around your territory in any weather conditions, and at any time of the year.

Now the drafted project must be applied directly to the site.

It will be easier to determine the width of the path and its direction if you apply markings directly on the site, which is especially important for a path made of paving slabs or bricks.

It is best to make markings with pegs, which you must first drive in, and then pull the rope along them. Also, for convenience, the side border of the track can be marked by sprinkling it with lime.

At the same time, it is important to take into account that the removal of the top layer of soil for laying the path should be wider than the path, because for reliability and durability it will need curbs made of such durable materials as concrete or stone.

Preparatory work

In order for the garden path to serve you faithfully for many years, thorough preparation will be required.

So, you need to take into account that the path should be with a slight slope, and in the area of ​​\u200b\u200bthe slope you need to make a drainage trench. This is necessary so that rainwater flows off the path, and excess moisture would not damage the coating.

The thickness of the removed soil should be 15 ÷ 200 mm. After that, in order for the edges to remain even, it is necessary to install boards along the entire perimeter of the dug hole from the side of the sides.

Then a “pillow” is made for this, gravel is poured into the pit along with cement and everything is compacted and moistened. "Pillow" should have a thickness of 50-100 mm.

Types of garden paths

There are a lot of materials, thanks to which you can make an excellent country path.

Brick path. Such a path is reliable, durable and looks very elegant in appearance.

Wooden path. Such a path looks beautiful and even mysterious, the round timber, laid out in the form of an ornate path, resembles a fairy-tale path.

Stone path. Those who want to see a stylish and elegant garden path on their plots can try a mosaic version of river pebbles.

Cement track. This trail is durable and safe. To make it attractive, you can use special curly molds, thereby you can get the effect of a paved path.

Garden path made of plastic covers. A rather unusual, but at the same time bright version of the path in the form of a mosaic of multi-colored caps from plastic bottles.

The presence of a large number of colors and the availability of material allow you to create a path with a variety of patterns that will make the landscape of your site a real work of art.

Plastic track. This type of track can be quickly and easily installed and, if necessary, changed and even removed.

Thanks to the relief surface of the plastic panels, it is convenient to walk along the path, because it does not slip, even if it gets wet. A wide range of plastic products will allow you to choose a garden path of any color and shape.

In addition, with the help of plates, you can make a track of any shape and width. The plastic design allows you to organize a path in any part of the site.

The advantages of such a path can also be attributed to the fact that, due to its structure, it will not be on it, moisture accumulates, water will flow out through special holes.

Path from a garden parquet. This material is among the expensive ones, but its advantages outweigh the desire to save money.

So, “garden parquet” can be easily assembled and disassembled, wood treated with a special solution is not subject to moisture, fading, temperature changes, has strength and durability, and besides, such a path will look luxurious.

Photo of garden paths on the site

These 27 simple and cheap garden path ideas will allow you to transform your landscaping without investing large amounts of money and without risking your budget. As part of this selection, options are presented using natural stone and pebble and gravel backfill.

The first idea is a small gravel path, edged with a curb stone. The most spectacular and budget option, which can be recommended for both paths and paths.

The next idea is a combination of crushed stone and concrete square slabs, spaced at a certain step, under your foot.

A beautiful idea for a path made of stone and large gravel. The border here is a tape that prevents lawn grass from creeping onto the path.

An interesting idea for a path made of bottle caps pressed into a cement base. You will need a lot of corks, but you can set yourself the goal of twisting all the corks from those bottles that you will find on the street while walking.

For small tracks, you can use a wooden beam or a board treated with impregnation or used machine oil.

A great idea for stone slabs and ground cover, these fabulous trails can be made in shady areas.

We return to the title photo - the idea of ​​​​stone slabs, with a border of curb bricks and a backfill of river or sea pebbles.

A similar idea for a walkway, only in this case square slabs are used instead of stone.

Wooden paths raised above the ground look very nice. Terrace board or board impregnated with a protective layer will last long enough.

Another idea from stone slabs, a garden in the shade and it is clear that the hosts in this case are adjacent to the ferns, forming a kind of mysterious entourage.

A combination of large stones - pellets from the river and concrete slabs.

An option for a paving stone walkway, you can also consider the idea of ​​​​using old red brick.

the idea of ​​double slabs and gravel backfill. You can also use brick chips or slag.

Beautiful mosaic path, consisting of stones and pebbles, laid out in a wonderful pattern.

A variant of a path made of saw cuts of a tree, if you use, for example, oak, then such a path will last for more than a dozen years.

In some cases, even stone imitation will be very beautiful, pay attention to this idea!

A variant of the track interspersed with large wooden sleepers or timber, with pebble sprinkling.

The distance between the stone slabs can be both large and small, literally the width of a pebble.

An interesting idea with the displacement of the plates on the track relative to each other. Pay attention to the mulch from hazel shells, this is how many nuts you had to eat!

A variant of the path made of square slabs, while the curb is made only on one side, the stone is placed on the edge and rises somewhat above the path.

The idea of ​​a path made of stone slabs and gravel backfill with asymmetry.

A variant of the path made of wooden boards laid out in a geometric pattern interspersed with pebble backfill.

Concrete path with paving imitation. A wonderful budget option that combines both beauty and speed of creation.

Path of slabs laid out diagonally. The space between the slabs is sown with a ground cover plant.

Let's go back to the idea with the mosaic placement of pebbles. By the way, the stone can be painted! It will turn out very lively and bright.

Get inspired and create paths, paths, dead ends leading to recreation areas in your summer cottages and private households.

Any effort aimed at creating a harmonious space will return to you later with a feeling of pleasure from the work done. And in general, creativity in any of its manifestations is the most valuable aspect of our life!