Welded collapsible brazier, dimensions (HxWxD, mm): 290x900x350, legs - profile pipe, body - sheet, 4 mm thick. Has a wood stand. Completely disassembles for easy transport.
Brazier - welded brazier, stationary, dimensions (HxWxD, mm): 290x900x350, material - steel 3 mm, barbecue stand material - steel 4 mm, stand for skewers, 3 levels for choosing the intensity of heating, two drawers for extracting ash and coals . Legs can be added upon request. extra handles and more. Also suitable for installation in the summer kitchen, oven, barbecue.
The brazier is stationary, with elements of art forging, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm, a shelf for firewood, a removable brazier for cleaning ash. At will all sizes and height of a support can be changed.
Stationary brazier with elements of artistic forging for a summer residence or a country house, standard dimensions (HxWxD, mm): 290x700x350, material - 3 mm steel, there is a firewood rack and a side auxiliary stand, for example, for dishes. At will, all dimensions and height of the stand can be changed.
Stationary brazier with artistic forging elements, standard dimensions (HxWxD, mm): 290x900x350, material - steel 3 mm, differs from previous models in that it has a special neck for cooking over an open fire. At will, all dimensions and height of the stand can be changed.
Stationary brazier with artistic forging elements, removable brazier, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm, there is a firewood rack, as well as additional shelves on both sides. At will, all dimensions and height of the stand can be changed.
Small compact brazier, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm. Small dimensions, allow you to easily fit it in the trunk of any car. Optionally, you can order removable legs, as well as change any of the sizes.
Stationary brazier but one pair of legs, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm. Budget model for lovers of barbecue and countryside holidays. At will all sizes and height of a support can be changed.
Stationary brazier with artistic forging elements, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm. At will all sizes and height of a support can be changed.
Stationary brazier with elements of art forging, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm, has a stand for firewood. Bright and colorful design for connoisseurs of Russian blacksmithing traditions. At will all sizes and height of a support can be changed.
A small but interesting stationary brazier, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm. Symmetry, semicircular shapes give brightness to this model. There is a roof and a stand for firewood. At will all sizes and height of a support can be changed.
Stationary brazier with artistic forging elements, standard dimensions (HxWxD, mm): 290x700x350, material - steel 3 mm. It has a shelf for firewood, two side stands, there are also handles for transporting and excavating coal and ash. At will all sizes and height of a support can be changed.
Stationary brazier with a roof for a summer residence or a country house, standard dimensions (HxWxD, mm): 290x1000x350, material - steel 3 mm. A large brazier allows you to place up to 20 skewers at the same time, you can treat and feed a large number of people. It has a large firewood rack and side supports. All dimensions can be changed upon request.
An interesting model of a brazier with a mini table for cutting meat and vegetables, standard dimensions (HxWxD, mm): 290x900x350, material - steel 3 mm. Firewood rack for the entire length of the brazier, there is a handle for ease of movement, on the opposite side - a pair of wheels. All dimensions can be changed upon request.
Solid brazier with elements of artistic forging and the possibility of transportation around the site. Standard dimensions (HxWxD, mm): 290x1000x350, material - steel 3 mm, has a large dronitsa, side stand for dishes, skewer. It is possible to complete the roof. All dimensions can be changed upon request.
An elegant brazier - a chest for giving or a country house, standard dimensions (HxWxD, mm): 290x800x350, material - steel 3 mm. Mini table for cutting meat, fish or vegetables, dronitsa, skewer, rain cover, wheels for moving, comfortable handle, removable roaster. All dimensions can be changed upon request.
Barbecue with elements of artistic forging, standard dimensions (HxWxD, mm): 290x800x350, material - steel 3 mm, roof - canopy, ornament in the sides and on the brazier, stand for dishes. All dimensions can be changed upon request.
The organization of pleasant leisure time in nature excites every owner of a country house or cottage. With the onset of warm spring days comes the expectation of weekends, holidays and vacations to get away from the bustle of the city and enjoy communication with friends and relatives in the shade of your own garden, on the shore of a pond or on a cozy terrace.
It is simply impossible to imagine such an event without the preparation of fragrant, delicious kebabs. The very premonition of a country picnic is darkly connected with the picture of pleasant chores around skewers with strung pieces of juicy meat and friendly gatherings where you can enjoy the taste of your favorite dish.
Barbecues from the manufacturer, which our company offers to all fans of leisure against the backdrop of nature, will help to cook impeccable quality barbecue in a comfortable and convenient environment.
Cooperation with us allows customers to take advantage of buying from a manufacturer with extensive experience in this market segment:
Many of the largest hypermarkets in Russia have long and fruitfully cooperated with our company. Barbecues from the manufacturer are in constant demand and favorable prices, especially for bulk purchases.
Numerous customer reviews testify to the undoubtedadvantages of purchased products:
Our customers can choose and buy models with different functionality, in a wide range of dimensions and availability of additional accessories. Convenient conditions for filling out an application and order, prompt production and delivery at the agreed time to the specified address - we work with the desire to serve each consumer with the greatest comfort.
If you know how to handle a welding machine, then the business of producing metal barbecues is quite suitable for you. The idea can be implemented with minimal investment - however, in this case, the income received will be less.
Interest in outdoor activities is growing, and sooner or later any family comes to the idea of the need to acquire their own barbecue and oil lamp. In addition, the useful life of these products is often not very long (the metal “burns out”), so periodically there is a need to replace them. The idea of the business is to manufacture barbecues, smokehouses, skewers. By and large, the brazier is an ordinary metal box with legs (in addition, holes are often drilled in the side walls for air ventilation so that the coals smolder better). Smokehouse - sealed metal box with a lid. For the oil lamp, you will need 1-2 more metal gratings, which are installed inside the product.
It will not be difficult for any welder to make such a product. You can come up with design features yourself, or take samples of barbecues and smokehouses sold in stores as a basis, or find information of interest on the Internet. Braziers and oil lamps are usually sold in tourist, fishing, or hardware stores.
Note!
Products can be made both from ordinary “rusting” iron and from stainless steel.
If you are not friends with the welding machine, then you can agree with the welders to work for mutual benefit. You give them orders, they give you finished products. The sale of finished products, of course, is entirely up to you. As for providing welders with raw materials (sheet iron), then everything is individual. You can provide welders with sheet iron, or they themselves can make oil lamps and barbecues from their own material.
Barbecues are stationary, portable (collapsible) of various sizes. Smokers are also portable and stationary. There is a demand for all types of products, so it is necessary to make things for every taste and budget. Stationary products can also be carried in a car, but they take up too much space, so, as a rule, they are installed once in the country and are not touched again.
In the manufacture of collapsible barbecues, the minimum participation of a welder is required - you only need to weld the ears to connect the components, the rest of the work consists in cutting out rectangles of the desired shape from a sheet of metal. Plus, at the vertical walls, the lower edge is often bent by 1-2 cm so that the bottom lies on the stop of the vertical walls.
The brazier itself consists of 4 legs, 4 vertical walls and a bottom. There are 9 items in total. All of them are metal rectangles, only some need to be bent (legs - along the entire length - it turns out a long corner; and the vertical walls have a small bend at the bottom of 1-2 cm at an angle of 90 degrees so that the bottom lies on the stop). Sometimes, instead of bending, small corners are welded to the vertical walls (to stop the bottom).
It must be remembered that the thickness of steel or iron directly affects the useful life of the product. A brazier or smokehouse made of thin steel up to 1 mm thick will burn out in 1-2 seasons.
A smokehouse or barbecue made of thicker iron or steel gives more uniform heating over its entire working surface, which makes cooking kebabs or smoked meats better.
To implement and successfully run a business for the production of metal barbecues, you will need a welding machine, a small metalwork workshop with the necessary equipment for working with metal - a machine for longitudinal and transverse cutting of metal, a workbench, a vise, a chisel, a hammer, a drilling machine, an emery wheel, scissors for metal ... In principle, you can use an ordinary garage for these purposes.
Of the listed equipment, the most expensive is the longitudinal and transverse cutting machine. Its cost starts from 250 thousand rubles, but can be found at a lower cost. It allows you to dissolve metal sheets or rolls into blanks of the required length and width (strip). You can also use manual machines for cutting metal (cost from 20 thousand rubles) - however, they all have a limit on the thickness of the sheet metal, but they are quite suitable for making barbecues and smokehouses, since some quite freely cut a metal sheet up to 8 mm thick. , the cost of a welding machine is from 5 to 50 thousand rubles.
Finding a good sheet metal supplier is important. The thickness of the metal and the quality of the weld are very important characteristics of finished products. You can buy sheets directly from manufacturers; at the first stage of your activity, you can buy metal sheets from your hands using ordinary ads on the Internet.
Metal sheets are divided into two main types - hot rolled and cold rolled. The sale and delivery of sheets can be carried out in different ways - thin sheets are rolled up and delivered that way, thick sheets cannot be twisted and they are delivered as is. Sheets are also subdivided according to rolling accuracy (normal and high), flatness (high and normal) and type of edge trimming. Cold rolled sheets are usually sold in sizes of 1m * 2m; 1.25 m * 2.5 m, or in other sizes, or in rolls 1.25 meters wide.
Hot-rolled sheets up to 3.9 mm thick come in rolls 1.25 meters wide, or sheets with dimensions of 1.25 * 2.5 meters. There are also sheets of other sizes (for example, with a thickness of 4 mm to 12 mm, there are sheets of sizes 1.5 m * 6 m).
Sheets and coils of other sizes are produced at metalworking enterprises using slitting and cross-cutting machines. Some welders claim that hot-rolled steel is better welded, but it would not be very correct to talk about any clear advantages. Both steels weld well.
Cold rolling makes it possible to obtain sheets with a thickness of less than 0.8-1 mm, which is unattainable with hot rolling. The cold rolled sheet has better surface finish and higher dimensional accuracy. The cold rolling process is more energy intensive, so "cold rolled" sheets are generally more expensive.
Depending on the steel grade and processing method, hot-rolled steel is divided into strength classes. Depending on the steel grade and processing method, cold-rolled steel is divided into strength classes, finishing group and drawing ability.
The cost of the product will directly depend on the material from which it is made. The cost will also depend on the grade of steel.
There are a lot of regulatory documents that define the quality standards for sheet metal. In particular, GOST 14637-89, GOST 16523-97, GOST 19903-74 determine the manufacturing standards for these products and the metal assortment.
Often sellers voice the cost of goods in tons. A table of correspondence between various sheets of cold and hot rolled products must be kept in front of your eyes.
In particular, a cold-rolled sheet of 08ps steel with a size of 1000x2000x0.5 mm will weigh about 7.85 kg. In one ton, thus, 127 sheets.
A cold-rolled sheet measuring 1000x2000x2 mm weighs 31.4 kg. There are 31 sheets in one ton.
A cold-rolled sheet measuring 1250x2500x1 mm weighs 24.6 kg. There are 40 sheets in one ton.
Sheet metal prices change quite dynamically depending on the market. It all depends on many factors: on the supplier - is it “left” iron or not, is the supplier a manufacturer or reseller, on the location of the seller, on the volume of purchases. It is clear that the price in Chelyabinsk and Cherepovets for sheet iron will differ significantly from the price, for example, in Yakutsk or Petropavlovsk-Kamchatsky.
It should be remembered that the cost of rolled products depends on the grade of steel, the accuracy of rolled products and other characteristics, so it will not be entirely correct to focus on the first announced prices - you need to clarify all the details.
In particular, in terms of 1 sq. a meter of sheet iron 0.5 mm thick costs about 150-200 rubles.
1 sq.m. sheet iron 1.5 mm thick costs about 350-400 rubles. It is possible to order sheets of the required sizes to metalworking enterprises, in this case the cost of 1 sq. meters of sheet will increase.
These prices are quite average, it is necessary to take an adjustment for the region and market volatility.
Now with regard to the sale of finished products. In fact, this is the most important question. You can sell oil lamps and barbecues yourself by posting an ad in the media and on the Internet. Or open a store selling metal products. You can rent for sale in stores - tourist, fishing, hunting, household. Offer your product to online stores.
Calculation of the cost of manufacturing a barbecue
On a brazier measuring 40 cm * 20 cm * 15 cm (where 40 cm is the “long wall”, 20 cm is the “short wall”, 15 cm is the height of the walls), it will take approximately 0.26 square meters. m. sheet iron. Plus 4 legs - if you make the corners of sheet iron yourself - this will take iron strips 40 cm long and 5 cm wide, in this case an additional 0.08 square meters is added. m. Thus, the brazier with the indicated dimensions will take about 0.34 square meters. meters of sheet metal.
Cost of 0.34 sq. m. will be with a sheet metal thickness of 0.5 mm will be 50-65 rubles. The retail price of such a barbecue is about 200-300 rubles. The margin on the finished product, therefore, is 300% -500%. True, it will be possible to use it for no more than one season due to the thickness of the metal, but this is not the point - you can independently calculate the profitability based on the desired parameters and dimensions of the product.
Knowing the prices for sheet iron in your region, you can easily calculate how much "iron" and money it will take to make a barbecue or oil lamp.
If there is a good demand for the product, it is very profitable!
Address: Tovarnaya, 57-B, 121135, Moscow,
Phone: +7 971-129-61-42 , E-mail: [email protected]
paper bags, custom-made furniture, decorative concrete, mixed fodder, wooden toys, tailoring, home smithy, donuts, spices, water, cinder blocks. to sum up: the production of any product is the most
exhaust ducts for natural ventilation must be made from the following premises of the house: sanitary facilities - bathroom, toilet, laundry room. kitchens. dressing room, pantry - if the doors of the premises go into the living room
Braziers and barbecues are an indispensable attribute of outdoor recreation. The most popular options for the execution of braziers are metal products. They have many advantages that allow you to cook a wide variety of dishes with exquisite taste and aroma.
Metal is the most common material for the production of barbecues and barbecues. Such structures are light in weight, they are easily transported and disassembled. The metal heats up quickly and retains heat well, which contributes to the uniform and rapid frying of fish, poultry and meat.
As a rule, products are made from two types of steel: stainless and heat-resistant.
The selection of metal is a very serious task., since during use, under the influence of high temperatures, the brazier is deformed - the boxes begin to resemble helicopter blades that are twisted in the direction of the main axis. This phenomenon is called plastic deformation. All structural elements are interconnected, therefore, internal stress arises, which causes a significant change in the shape of the brazier. In the future, this leads to a complete loss of shape and destruction of the product.
That is why stainless steel grills are not of high quality. This material is very afraid of burning out, so the brazier serves no more than 1-2 seasons. Heat-resistant steel allows you to create models that are more durable and durable. The alloy contains a high percentage of chromium, this metal oxidizes at elevated temperatures and forms a refractory coating. In addition, the production of this material itself is based on the addition of active components that prevent deformation and fracture of steel under adverse conditions.
Experts recommend using steel grades 10G2, 09G2S and 16GS for the production of barbecues and barbecues. They can withstand several thousand burn/cool cycles. But CT10, CT20 or CT3 alloys are more often used for tourist models, which are characterized by low weight and short service life.
In addition to being temperature-resistant, heat-resistant steel is corrosion-resistant and wear-resistant. It is not susceptible to impacts and mechanical damage of low and medium strength, therefore it is optimal for the production of braziers that are operated outdoors in conditions of high humidity.
The advantages of metal braziers include:
Braziers and barbecues can be bought in specialized stores, and they are also widely represented in construction hypermarkets. There they are sold in standard shapes and sizes. However, if you want something unusual, then you can order a brazier according to an individual project in the blacksmith's workshop. Such models, as a rule, are decorated with forged elements and decorated.
However, such installations are not easy, therefore they are used as stationary models. Yes, and the cost of such work is quite high.
Before buying or making a brazier yourself, you should be very thoughtful about choosing the best model.
The decision depends on many factors:
If we talk about barbecues, then it is customary to divide them into three categories.
Other samples are also on sale. Products with an exhaust hood and a chimney are widespread, so any buyer can choose exactly the modification that fully meets his individual needs and capabilities.
The brazier of a brazier can have the most various look.
The most common modifications are:
Stationary braziers, in turn, are divided into:
In order for the brazier to fully meet your needs, it is very important to know the technical features of the brazier of various types, the dimensions and dimensions of its individual elements.
This parameter directly affects the service life of the brazier: thin-walled products will last no more than 2 seasons, and models made of thickened metal will retain their operational features much longer. The recommended wall density is 3 mm or more. It is this size that protects the material from premature burnout and the occurrence of deformations.
The width of the design depends on the length of the skewer. It must fit and stay on the walls of the barbecue. Therefore, with a standard rod size of 40 cm, the width of the barbecue should be determined at 30 cm.
As for the length, it is directly proportional to the number of skewers placed on the grill at the same time. The only thing to take into account is the recommended distance between them. It has been experimentally established that skewers should be placed at a distance of 8-10 cm from each other. If you stack them more tightly, then the meat may not be fried.
This is a very important criterion, on which the taste and aroma of barbecue largely depend. It is believed that the meat located 15-20 cm from the coals is the most fried and juicy. If the meat is closer to the coals, it will become dry and may burn, and if you place it at a greater distance, it simply will not fry and will be raw inside.
Users still cannot agree on the appropriateness of holes. Some consumers claim that they provide the necessary blowing, thanks to which the meat is better fried. Others argue that this device is for a "lazy cook", and the air flow can be freely provided with a fan.
The dimensions of the "ideal" brazier look something like this:
The advantages and disadvantages of metal barbecues directly depend on the material from which they are made and its thickness. Let's take a closer look at the most popular varieties.
The choice of iron braziers is great. They differ in their functionality, so it is very important to determine from the very beginning what you need a brazier for. If you plan to use the product on hikes and during picnics in nature, then you should purchase collapsible models made of thin-walled metal. They are lightweight, easy to assemble and disassemble, and are considered easy to transport and store.
However, there is a drawback - thin steel quickly burns out, so such barbecues are not recommended for igniting coals.
It is advisable to make a fire in another place, and as the fuel burns out, transfer the coals to the barbecue. In addition, such models have a limited length, which does not allow you to cook barbecue for a large company at the same time.
Barbecues with thick walls are more expensive than thin-walled ones. They are heavy and difficult to move. The advantages are also obvious: such braziers are resistant to high temperatures, they do not burn through, they heat up well and keep heat for a long time, ensuring uniform and quick cooking of meat.
The disadvantages are also significant:
Such models, as a rule, are made to order and have a rather high cost. They also differ in large dimensions and impressive weight.
Stainless steel models are economical options that are quite low cost. However, the price is perhaps the only advantage of such products.
The disadvantages are so significant that they make all the savings impractical:
The main for the production of barbecue are metal sheets. It is not worth using additionally other materials, since it is the metal that provides the necessary heat power and the degree of heating of the structure.
To work on creating a standard brazier, you must use:
You will also need a tool for working with metal:
Sheets of metal are used to create the bottom and side walls of the brazier, however, some craftsmen prefer a different mounting method. They replace several sheets with one large sheet, then make several cuts, bend the sheets and join them together with a minimum of welds. The installation in this case will be more dense and durable. However, such work requires knowledge and skills in working with metal.
Fire inseparably follows mankind throughout the existence of the latter. Fire is one of the symbols that you can look at forever, especially if money is on fire. And it's no surprise that fire can make great business ideas. Several!
The most obvious and illustrative example of a business with a twinkle is making barbecue grills. Most instructions and sources on the Internet recommend doing the following (it is suggested to organize a business in your garage ... but in order to organize something in a garage, you need to buy this garage, and we don’t have money):
Yes. You can also engage in such a welding business. With one NO. Working as a welder with forged products, you can earn much more on various welding jobs than simply welding braziers (professional welders do not really like to cook braziers, there is a lot of work, and the profit is small). Trust my experience. Or for help, check out the article -.
In addition, by producing welded braziers, we limit and drive our potential customers away from us. Firstly, such braziers cannot be foldable, which means that only those buyers who need a stationary brazier are like us. Secondly, the material with which we can work is limited to "black" metal, which blocks access to customers who need original stainless steel barbecues. Thirdly, the barbecues are of the same type, and if you make them very beautiful, then heavy.
No, no, I do not dissuade you from this line of business. There is a demand in it, the cost of production is small, orders are coming. And as a side income, welding barbecues has a place to be. And what if we take and expand this type of business?
Forget about welding. You will have to master sewing and a computer. Yes, I'm serious, the production of metal barbecues may require you to be able to sew. All you need for this business is a little engineering education. If you do not have it, then you must have a friend or relative of a design engineer, you can be a pensioner or a student. Are you a retired engineer or an engineering student? This is your business, drop everything and prepare your wallet for profit.
What is needed? A simple and affordable thing: you need to develop in the design program - a collapsible brazier. As a rule, such braziers consist of 5 parts: a bottom, 2 sidewalls with legs, 2 long sidewalls with ventilation slots and a place for skewers. These parts must be connected to each other by a simple type of groove connection (do not forget when designing). That is, you take a sheet of metal of standard sizes and "cut" it into the component parts of your barbecue. One sheet can fit up to 20 barbecues, that is, about 100 parts. Ensure that there are not many extra scraps left. Although you can then turn them into ferrous metal and earn a little more money. Well, it looks like a pattern and sewing for now?
The designed brazier can be of almost all sizes: from miniature to stationary. Any metal can be used - from "black" to stainless steel of any thickness, the main thing is heat resistance. In addition, you do not need to be a welder, have a garage, and in general, you do not need to leave the house.
The production of such folding barbecues is as follows. You need to transfer the finished drawings and cuttings to a company that offers services for laser cutting of metals. All. At the company, ready-made parts of barbecues will be cut out of metal for you. Sheet metal is sold in the same companies, including all possible types of stainless steels. They will also provide metal bending services if you have such an element in the barbecue. The cost of cutting is from 30 rubles per linear meter. Cutting a sheet of metal, excluding the cost of the material, will cost you an amount not exceeding 5 thousand rubles.
The most important thing in this business is originality. Since you use laser cutting for the production of your braziers, you can easily “cut” ventilation slots on the sides of your braziers in various original forms of inscriptions and drawings. In addition to utilitarian properties, they will perform aesthetic - in the dark, with a lighted fire, inscriptions and drawings will be beautifully illuminated by glowing coals. You can use any inscriptions - from the general “Happy Birthday” to the names of brands of cars, motorcycles and other things, the limitation is your imagination and conscience. Also, you can easily put inscriptions on gift braziers to order. Appreciate how beautiful and poetic the inscription on the grill sounds - “The Ivanov family from the Petrovs” - well, beauty, isn't it?
The average retail price of such barbecues is from 2000 rubles (or from 4000 rubles for a stainless steel barbecue). With the application of individual inscriptions, of course, more expensive.
It is better to use ready-made skewers; you can purchase a set of ready-made skewers or a grill at any hardware store. You can also provide for the production of covers for carrying your barbecues, that is, again, sewing came in handy.
You can organize the production of folding gift braziers at home. Since only a computer is required for such production. The scheme of such a business:
The main driving force behind the sale of your barbecues is not only the uniqueness of the design, but also the originality of the inscriptions, the louder and more catchy, the faster you will receive an order from an interested client. Upon receipt of finished products, you can take pictures of them in the assembled state and supplement the 3D visualization pictures with real images.
Another way to establish your successful barbecue business is to “cut” ready-made barbecues with various inscriptions and sell them at a wholesale price for sale to various stores. In car shops - with car wishes (Subaru knocks down, BMW drives, Zhiguli drink). To the fishing shop - with inscriptions for the fisherman-hunter (don't sleep, fisherman, you'll oversleep half a liter, who gets up early, he's already frying by dinner, etc.). Here you are limited only by your imagination, the design and surface of your barbecue.
But what about welding? Do you want to work with your hands and with a spark? Yes please!
Fire bowls are a novelty in our market, which is gaining popularity. Fire bowls are needed for fires, amazing, right? :) They are a metal container with legs or a foundation. In this hearth, you can make a fire and burn bonfires without fear that the grass of the lawn will be burned around, the earth or the decorative coating on the ground will deteriorate.
There are no standards in the production of fire bowls. You are limited by the laws of physics and your talents as a great welder. In production, you can use laser cutting, welding, forging, the skills of a bricklayer and decorator, do not forget your sewing skills. Bowls can be stationary, portable, folding. The cost of simple fire bowls is from 1500 rubles. Individual and very beautiful hearths can cost from 300 thousand rubles. At the same time, in terms of cost, finished foci differ from each other by no more than 3-4 times. What is the most important thing in this business? Correctly! Do not get carried away, otherwise one of my welder friends made a small fire bowl weighing 1.5 tons. It's funny to you, but I still have to redo everything.