The use of glass blocks in the construction industry has a rich history. Used as fencing on stairwells, corridors. But the color scheme left a lot to be desired. The industry supplied the same type of material - white glass blocks. Nobody worked on their aesthetics.

Today, the opposite is true - use glass blocks in the interior of the apartment, the photo will help

Time changes tastes, preferences, assessments. Aesthetic parameters came to the dominant plan. In the logic of the new trend, enterprises produce glass blocks of various colors. The expansion of the tonal range allowed designers to create creative stories that compete with European standards. It is easy to see this if you look through the glass blocks in the interior of the apartment, the photos that are offered there for review.

Sublimation of design styles using glass blocks with their various geometric shapes has become a real find for technical artists in solving design problems. For example, with the help of a creative material, it is easy to achieve an increase in the luminous flux and at the same time obtain its kaleidoscopic diversity.

The photo tells about the locations of glass blocks in the interior of the apartment

Glass is cold and warm. It all depends on the compositional construction of the design plot. Today they are used as an installation:

• in the corridors;
• in bathrooms;
• in kitchens;
• in halls;
• hallways.

These are rectangular, square, semi-oval and other geometric structures with well-chosen double-glazed windows according to the degree of passage of sunlight or artificial light through them. Merchants offer blocks with a unique textured formula, which helps to develop design styles in an innovative way. Glass blocks will be offered at profile liquid sites:

• matte;
• in combined color;
• corrugated;
• transparent and others.

Evaluating at the same time as a building and finishing material, it is worth agreeing with the arguments of experts that they have a number of advantages. First, they do not require complex maintenance. It is enough to wipe the dust with a wet cloth, and they are sterile again. Second, the service life is eternity. Emotionally perceived as an ultra-light finishing material. Especially built into partitions, the blocks look like huge chandeliers.

Glass blocks in the interior of the apartment, the photo shows the best

It is better to start the construction of a residential facility with a developed project, which clearly defines the places for inserting glass blocks into the interiors of apartments on. A separate design project will allow the designer to highlight the dominant moment in the puzzles of the conceptual storyline. This will bring the entire architectural and design trend to a new level.


Glass block differs from brick in internal emptiness. Especially easy to use for creative design by placing inside:

• decorative things;
• ocean shells;
• interesting photos;
• dried plants and so on.

Fantasy here is not only a designer, but a developer is very relevant. But this does not mean that all the blocks should be perforated and create a mosaic for the entire wall. It is recommended to use fragments in places that the designer will determine.


The living area receives little natural light. It is not passed by walls, partitions. We turn on natural light to compensate for the weakened solar flow. That is, we go to direct financial costs. But even the fragmented arrangement of glass blocks adds light to isolated rooms. The use of glass blocks in housing construction is a pragmatic task.

We install glass blocks in the interior of the apartment according to the photo

What to do when a residential facility is built and suddenly the owners want to create a new entourage from glass blocks in the interior of the apartment - a photo that suggested a unique design. In any case, permission from the relevant institutions is required to carry out such work. It will be received if the block structure is integrated into a partition, which is a non-bearing capital element. The matter is simple. The choice of brick, other material from the partition is made according to the volume that the glass blocks will fill.


To visually isolate the premises, tinted blocks are used that transmit light, and the plot behind the partition remains inaccessible to the eyes. This applies to the technical absorption of the entourage of toilets, bathrooms and other premises.


Today, translucent walls and partitions are used for decoration. They are easily built into vertical, inclined, horizontal surfaces, creating cosmic styles. The phenomenon of the reconstruction of the everyday landscape is produced by glass blocks in the interior of the apartment, photos of which are placed in. It is important to remember that glass blocks are safe in operation, they are not subject to deformation at normal household temperatures.

Sublimation of glass blocks in the interior of an apartment with other materials

Homogeneous glass has a negative effect on human visual receptors. Blame it on the cold. The cult shortcoming is easily minimized by interspersing other finishing materials into the structure of the design plot that can change the conceptual soullessness of the glass entourage. To turn it into a boring design drawing, it is enough to dilute the area with dry plaster, dividing the sector into segments. In such dynamics, glass blocks will acquire a photo illustration in the interior of the apartment, which is outside the illusory created statics.


Plots with curves look great in terms of aesthetics. The reception gives rise to an imaginary perspective and curiosity, and what is around the corner. Let's look and find out that there glass blocks formed a photo with an architectural prologue-ziggurat in the interior of the apartment. Recently, glass blocks have been actively used in bathrooms. There is a reason, since glass is not afraid of moisture. Glass blocks are not traumatic, do not participate in corrosive chemical reactions, are aesthetic and eternal in use.

Modern glass blocks allow you to build both functional and decorative structures. The glass block partition in the room transmits and diffuses sunlight well, giving the interior lightness and airiness, but at the same time providing the necessary privacy. The material is durable, water and fire resistant, high heat and sound insulation, safety and does not require additional finishing. A wide variety of shapes, sizes, colors, degrees of transparency and textures will satisfy any needs and tastes. The wall for zoning the living room-bedroom can be completely lined with blocks or other materials with glass windows and inserts.

Partitions made of glass blocks in the room:
▪ 01

Partitions with windows and glass block inserts:
▪ 05

Studio apartments of square, rectangular and corner layout

Glass blocks in the interior (design)

In Soviet times, glass blocks were not often used to decorate rooms and facades of buildings.

Yes, and the choice was small - often the glass block was a structure made of uneven and cloudy glass. But today on the market there are a lot of glass wall blocks and windows made of glass blocks of various shapes and all colors of the rainbow.

In our article, you will learn what decorative glass blocks are and why glass blocks in the interior are a good design solution.

Glass block design

Glass blocks in the design of the room

Interior experts, not without reason, believe that modern transparent glass blocks and colored glass blocks often give visual lightness and airiness to the room where they are installed.

If you like experiments, then you can purchase an LED glass block with internal inserts or with stained glass pictures.

Since the glass block itself is hollow, you can put various decorative things in it, for example, stars, seashells, dried flowers, and just photos. Although it is more appropriate to use such decorative glass blocks only as an insert into a wall or ceiling.

By using glass blocks for design, you get a lot of advantages:

1. A window made of glass blocks transmits and refracts light, unlike plasterboard and brick partitions.

Thus, the glass blocks in the interior look like large lampshades, which makes the room spectacular.

glass block window

There are transparent glass blocks that let in daylight, but the "photo image" does not. This is logical, why should strangers see what they are not allowed to see? This advantage of glass blocks made it possible to use them for decorating windows in bathrooms. 3. Glass blocks in the interior are convenient, because they can be built into absolutely any surface. For example, illuminated glass blocks can be used as a great decoration for partitions, walls, windows, floors and even furniture.

You can learn more about other equally interesting features of glass blocks with photos in the article on our website "Glass blocks in an apartment - sizes and prices".

What can be made from glass blocks?

Walls, partitions can be made from glass blocks, or transparent glass blocks can be used to create window structures.

In addition, you can use colored glass blocks to decorate walls or create stationary furniture from glass blocks and much more. But first things first.

Illuminated glass blocks to create walls

Glass blocks are decoration for the wall

A wall of glass blocks will allow enough sunlight to pass through.

Moreover, corrugated glass wall blocks will protect from prying eyes. And also such wall blocks do not look heavy, which visually simplifies the entire space.

It's no secret that glass is cold and looks "soulless", which is why glass blocks resemble ice cubes.

Designers advise: if you decide to build a huge wall, then it is better to combine glass blocks with some other material. For example, let one third of the wall be made of transparent or colored glass blocks, and two thirds of drywall sheets.

A wall of illuminated glass blocks can be used to separate zones in an apartment, for example, a bedroom from a living room or a kitchen-dining room from a working area.

Glass wall blocks for creating partitions

Glass block partition in the bathroom

Glass blocks are good because thanks to them you can quickly and beautifully build a partition of any width and height.

In this case, the top of the partition can be curly, for example, stepped, pyramidal, or uniform.

Read more about this in the article on our website "Glass blocks for partitions".

Usually, glass blocks are used to create partitions in the bathroom, where they are most harmonious. After all, glass is not afraid of moisture, and the blocks are not completely translucent, which allows you to create a so-called.

n. "intimate zone".

Read more about this in the article on our website "Glass blocks in the bathroom".

Designers advise, like walls, to build partitions only in certain styles, for example, urban, loft, high-tech, and in classic decor they will look ridiculous.

Decorative glass blocks to create a window

Bathroom with glass block wall

Inner glass block window

i.e. it is a window construction between rooms, which brings additional light, and is also a decoration for empty wall surfaces.

To create windows, an LED glass block is used, which will perfectly fit into such rooms that share each other, such as a bathroom and a toilet or a shower room in a large bathroom, a living room and a corridor or a kitchen, a bedroom and a pantry.

Of course, glass blocks are also used for glazing window structures that go outside.

However, you won’t be able to enjoy a beautiful view from such a window and you won’t be able to ventilate the room with its help, because.

Glass blocks in the interior

to. such designs are usually produced deaf.

Decorated wall made of glass blocks - photos attached!

Glass blocks as inserts in the wall in the shower room

Glass blocks are also used as wall inserts. Often these blocks are "embedded" in the wall structure, and not through.

In another way, they are also called point glass blocks, which are used in fragments. But there should be few such glass blocks: one “brick” per sq. m. walls.

Colored glass blocks are used as an insert in wall structures and with internal photographic images, which give the premises brightness and originality.

Glass blocks to create stationary furniture

Glass block kitchen island

Glass blocks in the interior (photo) are a very convenient thing.

From them you can build a wide variety of structures. For example, a fixed island in the kitchen, a bar counter or in the bathroom - a beam under the washbasin.

Any furniture made of glass blocks looks impressive and solemn. There is only one drawback here - you can’t rearrange with furniture made of glass blocks; but is it necessary?

Other options for using glass blocks - photo

Glass block bath screen

From glass blocks you can create a screen (space) for a bath.

This can be done in two ways: lay it out of glass blocks or just decorate with them.

Such options for the use of glass blocks in styles are appropriate: modern and minimalism.

In addition, glass blocks are placed under the steps of podiums and stairs, and they also decorate an empty space near doorways. And sometimes in the kitchen a work apron is covered with glass blocks or a false fireplace is laid out of them in the living room.

In a word, there is room for a designer soul to turn around!

Glass blocks in the interior: their price is different, but affordable even for a person with a modest income. Read more about this in the article on our website "Glass blocks in the apartment - sizes and prices."

Photo gallery of interiors with glass block walls and partitions

Glass blocks are not only a wonderful decorative element, but also quite a functional material.

It can be used to decorate bathrooms, kitchens, living rooms and bedrooms, fold functional partitions and even use it as an additional sound and heat impervious layer.

From the past to the present

People who made the times of the USSR probably remember the glass blocks for partitions, which could often be seen in the entrances.

Translucent walls made of flat slabs perfectly decorated the interior and served as a solid wall. Today, many designers have decided to return such a useful material, but in a different version.

Pictured are decorative glass blocks

Why are glass blocks good?

1. They have a variety of colors and textures, which allows them to be used in a variety of interiors: from bathrooms to cabinets.
2. Glass blocks in the interior are highly durable and able to withstand significant loads.

   This allows you to use them for the construction of decorative walls and partitions. In addition, they are quite simple to replace without dismantling the entire wall.

3. The material is highly soundproof and perfectly retains heat. In addition, they are waterproof and quite fire resistant: they can withstand almost an hour with direct exposure to fire.
4. The installation of wall blocks can be carried out independently, without inviting the master. When working with them, neither paint nor plaster is required, in addition, it is convenient for them to give an unusual shape.
5. A variety of glass blocks plays into the hands of designers: glossy and matte, transparent and opaque, plain and with pictures, smooth and embossed.

   By combining a variety of options, you can create whole pictures or visually correct the shortcomings of the room.

Scope of glass blocks

You can build a wall of glass blocks or lay out a wall with them in any part of the house, giving the interior lightness and airiness.

Partitions in the bathroom made of glass blocks will allow you to separate the bathing area, separating the shower part, and in the kitchen - dividing the room into a place for cooking and a dining room.

Note!

Reflected in the glass, sunlight will fill the room with comfort and spring mood, and drops of water will beautifully settle on it.

Small glass blocks can be placed on the wall above the stove or near the sink, hiding the walls from moisture and heat.

The latter option can be used in any room if excessively thin walls let in cold and sounds.

Lay out a panel or a simple pattern from them a centimeter from the wall and enjoy the warmth and silence.

Glass blocks in the interior of the apartment: 85 photo ideas

If the room is too large, it can be easily divided into several parts using translucent walls. Refracting, reflecting or transmitting light, they will give the room an unusual look and make it more functional, dividing, for example, a nursery into a play area and a sleeping area.

Pictured are glass block partitions

Unusual use of glass blocks

In addition to the above methods, you can use decorative glass blocks in a more curious way, making them an arch between the corridor and the rooms.

Using light, reflective parts, you can easily turn a dark, narrow hallway into a bright and joyful place, and an exit to the main part of the apartment into an intriguing portal.

In addition to the standard arch, you can build an unusual relief wall that will complement the interior and decorate it, adding a twist to the overall look.

Block partition

But a simple wall and an arch is far from all that can be thought of from this amazing material.

An interesting feature will be glass block furniture: a bathroom screen, a washbasin console, a bar counter or a niche in the dining room. And although it will be impossible to move such “furniture”, it will please you, even standing in one place.

They can also lay out a ladder, a false fireplace, door and window openings, interior windows and much more.

In the photo glass blocks for partitions

Do it yourself

For those who decide to use this unusual material in the interior, there is great news: the installation of glass blocks is not difficult and is quite accessible to everyone.

You do not need any special equipment or skills - just simple accuracy and patience, as well as some materials that can be found in any hardware store, will suffice.

You will need:

• glass blocks of the right size;
• special glue or glue for tiles.

  You can use other solutions, but it is better to use moisture-resistant and refractory mixtures;

• mounting crosses, suitable in size;
• reinforced stainless bars for a stronger grip;
• level;
• grout for seams;
• transparent silicone sealant;
• rubber mallet.

In the photo, laying glass blocks with your own hands

Before starting work

The first step is to determine the dimensions of glass blocks, mounting crosses and rods using the example of masonry walls. Standard sizes of glass blocks are 19cm x19cm x8cm or 24cm x24cm x12cm.

Thanks to the standard dimensions, building a wall is much easier and more convenient. Mounting crosses are also divided by size: 2, 5, 10 and 16 mm. For the wall fit the smallest - 2 mm. It is better to take rods with a diameter of 4-6 mm.

Note!

Before starting installation, the floor on which the wall will stand must be thoroughly cleaned of dirt and dust so that debris does not get into the adhesive solution.

It is worth preparing all the materials in advance and stocking up on time: you will need to wait for the glue to completely harden.

Measure 1 centimeter from the wall in advance and draw a line - the entire wall that you build with your own hands will pass along it.

Glass blocks in the wall

Please note that glass blocks usually come with a protective film that protects their wide sides from adhesive and damage.

You need to remove it only after the adhesive solution has completely dried. If there is no film, it is recommended to make it yourself using adhesive tape.

When choosing an adhesive, give preference to the adhesive of the same brand as the glass blocks.

This will make the installation process easier and faster, and will also have a positive effect on the quality of the result.

Glass blocks in the bathroom

Let's get started

Before starting laying, do not forget to wrap each glass block in film on the flat sides so as not to spoil their appearance.

You need to start by laying out the first layer of blocks. Check the evenness of the surface with a level and correct if necessary. Insert mounting crosses between the seams to make the glass block partitions even and beautiful, and continue laying the second layer. Also check its level and put the third layer. Stop.

Now it will be necessary to leave the masonry for a while so that the glue has time to harden properly. Check the setting time on the packaging: usually an hour is enough, but some mixtures take longer.

Glass block partitions

Before moving above the third layer, it is worth strengthening the partition.

Take a reinforced rod and carefully place it on the crosses, being careful that it does not come into contact with the glass blocks - this will avoid rust. Recheck the evenness of the wall and continue laying.

This is the laying of glass blocks with your own hands.

Having reached the very top, leave it for the night, and preferably for a day, and why cut off all the extra corners and grout the seams. After the solutions have completely dried, you can carry out wet cleaning and remove the protective film from the blocks.

Illuminated glass blocks

Even though glass block adhesive cures fairly quickly, within a couple of hours, it is best to leave it on overnight.

Thus, he will have time to firmly grab the blocks, and the wall will become much stronger.

Glass blocks in the interior video:

About 30–40 years ago, the window openings of school gyms were “decorated” with clumsy glass blocks, where they honestly carried out their service: to the best of their transparency, they let in light and withstood a direct hit by the ball.

Glass blocks in the interior of the apartment: original ideas for your home

Time has gone forward, new technologies have come, and glass blocks have changed with them. They still let in sunlight and can protect against ball impacts, but the variety of shapes and shades has greatly expanded the scope of this building material.

Material features

The variety of shapes and colors, coupled with the lighting characteristics of this material, are complemented by such important properties as:

• strength;
• incombustibility;
• moisture resistance;
• heat and sound insulation.

Important factors when choosing a material are also the ease of maintenance and the relative cheapness of glass "bricks".

The combination of the above qualities attracted close attention of architects and designers to glass blocks.

The updated material began to be actively used in the construction and decoration of cottages, apartments, offices ... Of course, it is impossible to build a load-bearing wall of glass blocks, but any other partitions are quite suitable for this material. Glass blocks in the interior of the apartment can also be used to fill window openings and as an element of decor.

Scope of glass blocks

Most often, glass blocks are used in the design of the bathroom, where they decorate windows, enclose areas of showers or hide piping.

The glass squares of the blocks have something in common with the squares of ceramic tiles, and the presence of inserts of a different shade or texture in a homogeneous wall made of glass blocks gives the interior a unique individuality.

Another direction in the use of the material is panoramic windows, which looks especially good when creating verandas in country houses.

Another original solution for a cottage is a flight of stairs fencing, and both the space under the stairs and the walls of the staircase can be finished with blocks. The material is also suitable when creating a pool bowl ...

However, glass blocks are also used in small apartments.

The material is especially relevant when redevelopment of internal walls: by decorating a corridor with glass blocks, you can give it an elegant look and let in natural light, or by combining a room and a kitchen into a single space, using a wall of blocks, you can zoning the space.

And you can also support the glass wall by using glass blocks to decorate the bar counter.

The breadth of the assortment allows you to buy glass blocks that are suitable for your style of the room.

Properly selected glass blocks will give the interior lightness and add sunlight to the room.

Glass blocks in the interior: application

When it comes to glass block, we sometimes recall the nostalgia of obsolete porches of old houses, public canteens, hospitals and baths of the Soviet era.

Today, glass blocks in decoration are not uncommon, but they are already showing themselves in a new quality and in a modern style, gaining their popularity in the industry of decoration and interior design, as they say, everything new is a well-forgotten old.

In a modern apartment, glass blocks have found application in the interior design of a bedroom, kitchen, bathroom (shower), as well as for zoning rooms indoors, in the form of walls and partitions, giving the interior of a room in an apartment a fabulous atmosphere and additional comfort.

In this article, we want to tell in detail the areas of application, installation and installation technology, as well as the advantages and disadvantages of glass blocks, supplementing and commenting on the material with photos and videos with recommendations, where you can pick up some interesting fresh ideas and solutions for interior design and zoning your apartment.

The use of glass blocks in the interior of the apartment

The idea of ​​using glass blocks in the interior was born not so long ago, although they have been used as a building material for half a century.

Today, interior designers do not miss any even the smallest opportunity to translate fresh ideas into their projects, one example of this is the use of such material in a living room.

Thanks to new technologies, glass blocks have found their second wind, corrugated, frosted, colored, as well as glass blocks with inserts of various shapes and sizes have appeared, which can transform any interior beyond recognition, give freshness, lightness and distinctive beauty.

Glass blocks in the bathroom.

Glass blocks in the interior of the apartment photo

Thanks to its light-toning insight, letting in only particles of light and diffused colors, bathroom glass block interior decoration has become very popular and fashionable now.

On the other hand, it is a convenient material for zoning and dividing space, creating an atmosphere of privacy and comfort, this method is especially good for dividing a shower or bathroom.

In addition, glass blocks are a very safe and smooth material, that is, it is impossible to get hurt on the edges. There can be no question of moisture resistance, since it is made entirely of glass.

In the kitchen. Along with a large number of options for colors, shapes and sizes, glass blocks are successfully combined in the interior space of any kitchen, even a very small one.

Above the sink, a glass block panel of three-dimensional dimensions will look great, and above the gas stove, a mosaic of small squares.

In the interior of the bedroom. Interior designers do not stand still, they use every opportunity and zest to realize their design ideas and fantasies.

Glass blocks in the bedroom not only harmonize with the overall interior of the room, scattering or refracting light, but also give a certain kind of soothing coolness and silence, having such characteristic properties as soundproofing.

In addition, such fire glass blocks are safe.

If you have a large kitchen, then this material can be considered as a good option for zoning the room itself into the dining room and kitchen, while not depriving the adjacent space of light.

Glass blocks in the hallway. The hallway is considered one of the small and narrow rooms, the design of the hallway with frosted and corrugated glass blocks can visually increase the area of ​​\u200b\u200bthe room, and you can complement the interior with colored block inserts, making them like a decor element.

A great option in the apartment and the idea of ​​​​creating a glass block arch instead of a door between the living room and the hallway.

In the interior of the living room and hall. Modern glass blocks allow you to give the interior of the living room and hall an unusual beautiful and cozy look, using multi-colored inserts.

In addition, some windows can be laid with matte views, while they will let in 50% of the light, and between the living room and the hallway, you can design a partition with bends from transparent or corrugated glass blocks, which will naturally give the interior of the rooms an exquisite style.

Glass block walls and partitions

In order to rationally plan the space of an apartment, many owners take such radical steps as rebuilding non-load-bearing walls or erecting various kinds of partitions.

In some cases, depending on the material, this is advisable, for example, as for zoning a bathroom.

Commonly used materials for such structures are brick, wood, plasterboard, aerated concrete blocks, glass and glass blocks. This article will focus on one of the most optimal and aesthetic material for such purposes as glass block.

The use of glass blocks in the interior as a wall and in partitions has its advantages:

1. Excellent material for decorating walls and partitions.

   The distinctive quality of glass blocks from similar materials is the presence of a variety of shapes, colors, textures and patterns.

2. It has excellent light transmission and light scattering effect.

   Before choosing a glass block, you should accurately determine their future purpose. That is, blocks with a glossy surface transmit light well (translucent), matte ones muffle, and glass blocks with a corrugated surface have good light-scattering effects.

3. High strength.

   Walls and partitions built from glass blocks are so strong that they can only be broken with a sledgehammer. But even if, for some reason, several blocks break, it will not be difficult to replace them with similar whole blocks.

4. Thermal and soundproofing. Due to the internal sealed air space, glass block walls perfectly absorb noise, and also perfectly retain heat.
5. Fire resistance.

   They are considered one of the fire resistant materials as they can withstand direct fire for up to an hour without melting or cracking. Tellingly, the walls of glass blocks in a fire situation can serve as a reliable barrier against fire until the arrival of firefighters.

6. Ecology.

   Glass blocks are an environmentally friendly building and finishing material. In fact, they are made from pure natural raw materials (quartz sand processed into glass) that do not emit or accumulate toxins, odors and harmful substances.

7. And a few more advantages of using glass blocks in the form of walls and partitions, that they do not need to be painted and plastered, and it is also convenient to give walls and partitions unusual shapes and curves.

Technology of installation and laying of glass blocks

Installation and laying of such material is undemanding and quite simple, if you follow the technology and make a little effort, then you can do it yourself with laying, for example, a small partition, in an hour.

For laying and mounting glass blocks, it is preferable to use a special glue, but if for some reason it is not at hand, you can use ordinary masonry mortars such as tile adhesive or, on the very edge of the cement-sand mortar, but taking into account that the composition does not there were large grains of sand.

The base before laying glass blocks should be cleaned of dirt and dust, if necessary, leveled.

In advance, you need to prepare mounting plastic crosses (standard sizes 2.5,10 and 16 mm), reinforced stainless steel or galvanized rods (4–6 mm in diameter) to reinforce the masonry, a rubber mallet, level, colored grout for joints and silicone sealant, preferably transparent colors.

The very first block (standard glass block dimensions 19x19x8 and 24x24x12 mm) is laid from the side of the wall, taking into account that the expansion joint between the wall and the block does not exceed more than one centimeter.

Next, the following blocks are laid so that the seams between the blocks are even, use mounting plastic crosses, preferably 2 mm, since the wall or partition made of glass blocks in this case will look very rich and beautiful.

Please note that every third row must be reinforced with reinforced rods.

Reinforced rods must be laid on the mounting crosses and in no case should they come into contact with the glass block, in order to avoid rust and corrosion.

After each laying a row, it is required to check the level for evenness. For a better fight of the whole structure, after the third row, let the solution dry. If this is an adhesive mortar, then an hour is enough, and for a cement-sand mortar it will take at least a day.

After all the work done on building a wall or partition from glass blocks, it will be possible to chop off the protruding outer plates and rub the seams with colored grout.

Basically, many glass blocks already come with a protective film against the protection of the adhesive composition of the mortar and physical impact during installation. The protective film should be removed only after the completion of all the work done, and best of all during wet cleaning.

Glass blocks are called hollow sealed materials in the form of bricks, which consist of two half-blocks of glass. Use this material for decorative decoration of the room. Partitions between rooms, decorative inserts and other elements are made from it.

Glass blocks are durable, environmentally friendly, and fire resistant material, light passes through them freely, which makes the room more spacious and open.

Glass blocks can be of different colors and structures, this allows you to combine different types of material and get the original surface. In care, the material is not picky, it can be washed with water or glass products can be used.

Standard glass block size

Glass blocks of a standard type have a thickness of 7.5-10 centimeters, its weight can reach 4.3 kilograms.

The shape of such material can be rectangular or square.

The dimensions of a glass block of a standard type can be 19 * 19 * 8 centimeters or 24 * 24 * 8. Also, the material can be purchased in the form of halves, which have dimensions of 19 * 9 * 8 centimeters or 24 * 11.5 * 8.

Glass blocks in the interior: glass block partitions, laying, installation, photo

Glass blocks can be triangular or angular in shape, they are used to decorate decorative columns and other elements.

Proper installation of glass blocks

Glass blocks are laid in two ways: cement and frame. The first method is used when it is necessary to equip a large and strong structure or partition, that is, when building walls or window openings.

The frame laying method is more complex and expensive, but has a spectacular appearance, unlike the cement method.

With this method, cement is practically not used, this greatly facilitates the entire structure.

Cement method of glass block laying

With the standard laying method, a special type of cement is used, which has a uniform and high-quality structure, it does not contain large grains of sand, since these elements can leave scratches on the block.

For work, it is necessary to prepare spacer crosses and metal rods that have a cross section of up to 6 millimeters.

With the help of spacer crosses, the same distance is obtained between the stacked blocks. Also, cross elements help to make the wall stronger and more rigid. The rods serve as a reinforcing element that strengthens the entire structure.

First of all, the initial row of glass blocks is laid, then the cement composition is spread, the metal rod is laid, and the following glass blocks are installed.

If the area of ​​\u200b\u200bthe structure being erected is too large, then the rods are laid not only horizontally, but also vertically.

Crosses for spacers are placed between the blocks, in their connections.

The caps of these elements should look out, and after the material is completely dry, they are removed by chipping. When laying glass blocks, it is necessary to use a building type level so that the structure is even.

Laying is carried out in three rows with breaks for a day, while the cement composition has time to harden and harden well. If this is not followed, and more than three rows are laid, then the structure may shift or fall apart.

Laying glass blocks in a frame way

First, determine the size of the glass block partition.

Then a frame of wooden elements is installed in this place. During the manufacture of the frame, all cell sizes must be accurate, glass blocks will be placed in them.

The frame is fastened with glue or twisted with special hardware. The frame is painted in the desired color, and left to dry.

The frame can be made separately, and then installed in finished form in the intended place, secured with dowels or anchors to the wall, floor and ceiling.

After that, they start laying glass blocks, they are placed in each cell from bottom to top.

When all the cells are filled with glass blocks, they are fixed with silicone. It is applied to the junction of the glass block and the wooden frame, while the elements will not fall out of the main structure.

The silicone type sealant is colorless, so the colored elements do not deteriorate. After eight hours, this is the time during which the silicone dries completely, the partition is considered ready.

For a large number of people, when the phrase “glass blocks in the interior” comes to mind, a picture from the past will come to mind, when glass blocks were used in schools, hospitals and other public institutions, they were even a hallmark of that period. If earlier it was translucent squares collected in one place, then current designers offer a variety of shapes, colors, shapes and sizes. The use of glass blocks turns the interior of an apartment or house into a bright, atypical and expressive design solution. In addition, the dwelling visually increases and becomes lighter.

Glass blocks in the interior

Glass blocks in the interior are beautiful, reliable. Such material is famous for its resistance to negative conditions - it easily tolerates low temperatures, humidity, fire. Due to the fact that they easily transmit light, but are opaque, they are widely used in finishing work. This ability even allows you to save energy. A variety of glass blocks, their sizes, colors and assortment, allows you to widely use, combine. Caring for glass blocks is very simple, no special materials or costs are required. It is enough to systematically wipe the surface of the material with damp sponges. There is no need to glue or paint glass blocks later.

But there are also not very positive aspects of using this material. The downside of using glass blocks is that decor or shelves cannot be nailed on their surface, and in case of replacing a window with a glass block, there is no way to ventilate the room. The material cannot be cut, and the glass block walls cannot be wired or wired.

Often the question arises - is it appropriate to use glass blocks in a particular style of home. As practice shows, if the apartment is made in a modern style, the installation of glass blocks will only emphasize the design idea. As for the classic or folk style, the option with double-glazed windows does not always organically fit into the interior.

Scope of glass blocks

The use of glass blocks in the interior of residential premises will help to express the individuality and creativity of the owner. A variety of materials available will help give the room a very interesting and original look. In the modern world, finishing with these materials is widely used both in private residential premises and in public places.

With the help of glass blocks, you can divide a large room into zones. It is good to apply in rooms, the purpose of which is to rest and relax. Glass blocks in the bedroom can create a wonderful mood, multi-colored blocks, subject to an additional play of light, will create a romantic mood and affect the emotional state of family members in the best possible way. In addition, such a division of the room into a zone in no way reduces the visual footage, but will contribute to the visual expansion of the room.

As for the bathroom, the resistance of the blocks to moisture allows this material to be widely used. A glass block partition can perform several functions: act as a partition dividing the bathroom into two parts, or serve as a decoration. You can experiment with blocks as you like, there are many options for combining shapes, colors and sizes of elements. Modern designers have come up with the idea of ​​making shower cubicles in bathrooms from glass blocks. This not only makes the interior of the room very original, decorates the room, but also allows you to save a lot.

Glass blocks in the hallway will help make this often not very bright room more fun and original. A glass block partition can separate the living room from the hallway. If desired, during the laying of blocks, you can leave niches, where objects are then placed that enliven the room. The use of colored or corrugated glass will make the room bright and very cozy.

In the kitchen, the use of blocks has no restrictions: you can make a bar counter, large or small zonal partitions.

Sometimes glass blocks are used to make the floor. If there is imagination, the scope of the material can be expanded by adding something new, one's own.

Advantages and disadvantages of using glass blocks

Why are glass block decoration options becoming more and more popular and used? Designers note that the use of blocks for decorating or dividing a room into zones is so in demand because:

• glass block walls are capable of transmitting more than eighty percent of the light; creating a wall to separate a room will not negatively affect the interior;
• blocks are moisture resistant, which allows them to be used in rooms where it is humid or even damp;
• structures made of glass blocks are very durable, fundamental;
• use in the kitchen or bathroom is applicable to any interior style;
• Caring for objects made of glass blocks is very easy and fast;
• objects made of glass blocks have high sound insulation;
• environmentally friendly material;
• high thermal insulation.

Among the disadvantages of using glass blocks are the following points:

• it will be just a wall, without shelves, the possibility of nailing or attaching something;
• as windows, the material is perfect, but it will not be possible to open and ventilate the room;
• there is no way to cut the material;
• it is not possible to place wiring inside a glass wall.

But compared to the advantages, aesthetic appeal and practicality, these disadvantages do not matter so much.

Glass block options for an apartment

Glass blocks are a design product intended for construction. The glass block consists of elements consisting of two halves with a cavity between them. In this case, the insulation of objects can be compared with laying two bricks. Depending on the visual features, double-glazed windows can be divided into the following groups:

• Corrugated - although they are transparent, it is difficult to see an object through them, depending on the angle of the faces, light guides, light-scattering and colorless are distinguished.
• Transparent - transmit light well, objects are visible, but distorted.
• Glass block partitions - let through no more than fifty percent of the light, have one of the sides transparent, and the other - matte.
• Multi-colored or colored glass blocks - you can apply any combination of colors to your liking, when using such double-glazed windows, the color is not washed off or faded, and the room will take on a cheerful and original look.
• Inserts in double-glazed windows - these can be 3D pictures of animals, fragments of paintings or heroes of fairy tales, depending on the interior and place.
• Stained glass windows are one of the most expensive options for glass blocks, they decorate the interior and give it a very sophisticated look.

Glass block sizes

Typical sizes of glass blocks are most often nineteen and twenty-four centimeters. The weight of the block ranges from two and a half to four kilograms. You can use glass blocks in any part of the apartment, you just need to make the right choice:

• shape and size - depending on what and where you want to post;
• appearance, color design, texture - where you plan to apply the material;
• cost - make a decision on your financial capabilities;
• quality - the construction is being built for a long period of time and the issue of quality should not be ignored.

Material is laid in one of three ways:

• with the use of glue - a laborious process and requires a lot of time;
• with the use of a solution - water is used, care should be taken, the use of fittings is necessary, a frequently used method;
• without mortar - the simplest method, with the help of modular frames, a mobile structure is obtained, the method is expensive and not often used.

Glass blocks for an apartment will help transform the interior and give the home a stylish look.

Scheme of laying glass blocks

Before starting work, it is necessary to check the correctness of the surfaces with a level. Draw lines, measure the desired dimensions - thickness, length and height of the final result. Wooden planks should mark the boundaries of the base of the structure.

A solution is applied to the first block, it should be remembered that if glass blocks have a protective coating, it should be removed after work is completed. The second block is also laid, a cross is placed between the objects, so do this until the end of the row. The next horizontal row should be laid by first placing a reinforcing bar between the rows. It is necessary to place a rod at the base of the crosses and this will help to avoid contact between the reinforcement and glass blocks. When laying the material on the cement mortar, one should not rush, no more than three rows are allowed per day, otherwise the structure may be deformed, warped.

After the laying is completed, after a certain time, during which the solution dries, work is carried out on finishing, polishing and protection. The crosses are removed, the process takes place with the help of a special device to avoid scratching the surface of the blocks. The protective film is removed from the blocks, grout is applied. This mixture requires an indefinite period of time to dry. While the grout mixture is wet, clean the surface with a soft cloth or napkins made from natural materials.

Glass block laying

Previously, glass blocks were laid with the usual cement mortar, with the addition of PVA glue or adhesive mortar for ceramic tiles. Now that a special adhesive for glass blocks has appeared, this option is most often used. The composition of the glue (in fact, it is a dry mixture) includes all the necessary components that previously had to be added and mixed on their own - a plasticizer, an illuminator. You can buy this mixture in the building market. Sometimes the laying of glass blocks is still carried out using old technologies.

When laying glass blocks, it should be remembered that the wall of these elements cannot be load-bearing or hold any heavy elements. Attaching something heavier than ten kilograms to them is prohibited.

For strength, reinforcement with a special anti-corrosion coating should be laid in the middle of the glass wall, the reinforcing bar should not come into contact with the blocks. The recommended diameter of the rod is about seven millimeters.

A glass block structure is not advised to be built above four rows in height, otherwise the structure may be skewed. To avoid deformation or curvature of the row, the structure should be divided both vertically and horizontally. Sections must be fixed and securely attached to walls, ceilings or floors.

Necessary materials for laying

To arrange the glass blocks, you will need tools and materials so that when you start the process, do not be distracted anywhere, take the issue of preparation carefully. To work, you must have:

• glass blocks;
• building level or plumb line, which you can do yourself;
• putty knife;
• metal profile;
• a special mixture or glue for fixing elements;
• a device for stirring the solution;
• rags, sponges.

If you are confident in your own abilities, you can install glass blocks on your own, save money and enjoy the result of your own work. But if you doubt that you can, it is better to invite specialists.

The result of using glass blocks in the interior will be space, light and comfort. The room will sparkle with new colors. In such a dwelling it will be comfortable to live, meet friends or spend time with family.

If you still have questions about how to lay glass blocks in an apartment, what are the options and ways where you can apply the material, watch the video at the end of the article. It contains answers to all questions.

If you still associate this material with unpresentable glass squares from the recent past, it's time to get to know it better. The scope of modern glass blocks is almost unlimited, the design solutions are practical, beautiful and original, and the installation of glass blocks with your own hands can be done even without special skills in construction.

Features and technical characteristics of glass blocks

Modern glass blocks are a hollow material, which is formed from two glass plates 6-9 mm thick, hermetically connected by pressing. Currently, they are produced on automatic lines, which guarantees the invariance of the qualitative composition of the glass mass and the tightness of the seam. Glass block can be transparent, matte, colored or corrugated. According to their light-optical properties, they are divided into translucent, light-scattering and light-guiding. The thickness of the tiles is 7.5-10 cm, the weight is within 4.3 kg. In addition to standard square and rectangular blocks, they produce triangular, angular, round and half elements. There are also decorative glass blocks. They are presented in a wide range of colors and textures, which allows them to be used in various interior styles.

Advantages and disadvantages

Like any other material, double-glazed windows have their pros and cons. This, in turn, affects the possibility of their use for certain purposes.
Advantages.
Moisture resistance.
light transmittance.
Soundproofing.
Fire safety.
Frost resistance.
Ease of maintenance.
Does not require additional finishing.

Flaws.

The wall remains intact. It is impossible to drive a nail or screw a screw into it, as well as to carry out an electrical wiring or sewage system inside.
Glass blocks are not processed. They cannot be sawn to fit the required size. All measurements must be calculated in advance.
In a room where the window opening is glazed with glass blocks, it is necessary to carry out additional ventilation systems.

Glass blocks in the interior (hallway)

Options for using glass blocks in the interior

Not so long ago, glass blocks have returned to fashion and have become widely used in interior design. With their help, you can bring to life the most daring and original ideas, it is beneficial to play with light. Glass blocks in the interior of an apartment photo are used to create walls, partitions, windows, furniture and much more.

Glass block wall

During the redevelopment of apartments, it is often necessary to remove or move some walls. This helps to plan the space and create a convenient option for the arrangement of rooms. The glass wall is an original and interesting solution. Visually, it makes the space easier. There is only one downside to this option. By itself, the glass block looks cold and does not contribute to the creation of comfort. Therefore, it is often combined with other materials, such as drywall or using multi-colored elements. This combination allows you to make the interior more interesting.
This type of decor is especially popular in corridors, lobbies and other darkened rooms, where a wall made of glass block will be not only a functional element, but also an additional source of light. Glass blocks will look chic if in the interior of the apartment it is possible to lay out a wall that is rounded as in the photo.

Partitions

Partitions of varying complexity, width and height of glass blocks are often installed in the bathroom. Glass here looks the most harmonious, goes well with tiles, is not afraid of moisture, is not affected by fungus and is easy to clean. Frosted glass blocks allow not only to zone the space and organize the so-called intimate areas, but also to create practical shower cabins of the desired size and shape from glass blocks according to the photo. A small partition can advantageously divide the kitchen into a working and dining area, and the living room into a bedroom and living room.

Window

This way of connecting the external and internal space through transparent or frosted glass blocks is best suited for baths and pools. As a decorative element, a glass panel is made in the form of a window. If desired, it is decorated with light curtains. Glass blocks in this form are laid not only in the bathroom. Original windows can separate the living room or kitchen from the corridor. When glass blocks are used as windows, openings usually take on the most incredible shapes.

floors

The strength of the material allows the use of glass blocks with a rough texture as a floor covering. Under such transparent areas, usually, a backlight is placed, the effect is impressive.

Do not lay glass blocks on the floor in the bathroom or hallway, where their surface can become dangerously slippery.

Furniture

Modern glass "bricks" are a convenient and practical material for creating furniture designs. In the kitchens, they build islands or bar counters. In the bathroom, you can build a console under the sink, and a narrow wall of glass blocks can smoothly turn into a small functional table. Glass furniture looks spectacular and original, but it will be difficult to rearrange.

Separate decorative elements

Decorating the walls of rooms, glass blocks are often placed pointwise. Recessed into the wall, they do not transmit light, but reflect it very beautifully. One tile is placed on an approximate area of ​​1 m2. The options for using the material are limited only by the imagination of the designer. Glass tiles make out a kitchen apron, frame door and window openings, mirrors. Lay out of them the risers of stairs, podiums and even false fireplaces. The shower cabin made of glass blocks looks interesting photo, as proof.

Glass blocks in various interior styles.

When developing the design of a room, it is important to take into account that glass blocks must harmoniously fit into the style of the room and create a single composition with it. Particular attention should be paid to the color and texture of the building material, to choose the right shape and method of constructing structures. The most harmoniously transparent or monotonous glass block looks in modern styles, urban, loft or high-tech. The decorativeness of baroque or art deco can be emphasized by multi-colored tiles, as an addition to the main material. Stained-glass windows will fit into the art nouveau interior in the best way, they will also be appropriate in oriental stylizations and modern classic interiors. They practically do not use the material in the interior, made in the style of country, rustic or retro.

Installation of glass blocks

Having mastered the theory, you can safely proceed to practice. Installation of any element of glass blocks can be done in one of two ways:
on the frame;
for glue or mortar.

Regardless of the method chosen, before proceeding with the installation, it is necessary to take into account a number of features of working with the material.
The floor on which the glass blocks will be laid must be perfectly flat and clean.
The total wall area should not exceed 15 m2, otherwise the blocks in the lower rows may crack due to their heavy weight.
Any wall made of decorative glass block cannot be used as a load-bearing wall.
The protective film of frosted glass blocks is removed only after filling the seams.

Technique "On the frame"

This installation technique is quite simple. Sometimes it is called dry. The glass block is fixed on special modular systems. This method allows you to quickly lay out perfectly smooth walls without plumb lines and levels. Usually, the frames are made of plastic or wood, aluminum and polyurethane are also found. Each block has its own cell, its size is selected depending on the dimensions of the glass block. The frame is attached to the wall with screws, also fixed on the floor and ceiling. In the cells, the blocks are fixed by means of special rubber gaskets. This installation method does not require special skills, but is used only to create decorative or interior partitions where good sound insulation is not needed.

For glue or mortar.

This technique is more complex, time-consuming and will require certain knowledge. Fix the material on a special glue for glass blocks. Reinforcement is performed at the installation site. Two stainless steel rods are laid on the floor parallel to each other. The width between them should be less than the depth of the glass block. Vertical reinforcement is performed with a step equal to the width of the block. For better sealing, an insulating tape is fixed to the base of the frame. On it, the place of joining of the blocks is marked with the help of spacer crosses. After laying each row, the structure is reinforced, two reinforcing rods are laid in parallel and recessed into the solution.

Glass block laying

Today, more and more often you can find glass blocks in the interior of rooms decorated in various stylistic directions. Due to its good performance and aesthetic qualities, this finishing material can be used to create partitions, windows, walls and doorways, which will make the design elegant, original and spectacular.

The glass block is a hollow three-dimensional block created from fused glass plates with a thickness of about 10 mm. The product can have a square, triangular, round or rectangular shape. The first option is the most popular. Glass blocks are characterized by dimensions 190x190 and 240x240 mm, thickness 80-100 mm. The weight of the product depends on the dimensions and averages 3-4 kg.

Glass blocks - photos clearly display different options - they can be transparent or matte, with a smooth or embossed surface, glossy, matte or with a mirror finish, which affects the light-scattering effect. Manufacturers produce products in a variety of colors, ranging from calm neutral shades to bright flashy colors.

Due to the special design, they are characterized by a number of distinctive advantages. Due to the air inner layer, the sound permeability of the material is reduced by 60-70%. The product is simultaneously characterized by good light transmission, and thanks to the dense glass, the outlines of the silhouettes behind the wall of glass blocks are blurred, which makes it impossible to spy on what is hidden from prying eyes.

The material is characterized by high strength, resistance to cracking, smooth surface and environmental friendliness, as a result of which it can be used for the construction of partitions in children's institutions. Products have increased moisture resistance, good thermal insulation, resistance to condensation and temperature fluctuations, which makes it appropriate to use glass blocks for partitions in bathrooms, saunas and swimming pools.

Glass blocks do not require special care. The surface is able to withstand an unlimited number of cleanings with any detergent.

Made of glass blocks looks very original and stylish

However, this material is not without drawbacks. Among the main negative points, one can single out the significant weight of the product, which is why it is not recommended to build walls from glass blocks with an area of ​​​​more than 15 m². In addition, the installation of elements is very laborious and requires certain skills and knowledge. Another disadvantage is the high cost of products. You can buy a glass block from a domestic manufacturer for an average of 150-200 rubles. A product of European quality will cost 300-450 rubles. The cost of a decorative element varies between 1200-1500 rubles. a piece.

When using glass blocks in the interior, one should be guided by the main rule: everything should be in moderation. This material is able to bring translucent beauty and icy chic into the atmosphere, filling the room with cold at the same time.

Glass blocks should not be used in interior design in the style of classicism, baroque, empire, renaissance or gothic. The material will be appropriate for more concise areas, such as electrics, minimalism, eco-style, pop art, hi-tech, modern, art deco, country and urbanism.

When using glass blocks, you must be guided by certain recommendations:

• cold glass should be proportionally combined with warm finishing materials, such as wallpaper, laminate, fabric, in a ratio of 1:10 for residential premises;
• in rooms where glass blocks are used, there must be decorative accessories made of wood, fabrics or forging elements;
• colorless transparent products should be balanced with bright saturated tones;
• when using glass blocks as elements for glass, it should be remembered that the structure created from this material has a decorative function, and is not a multifunctional element.

Options for using glass blocks in the interior of an apartment: photos of design solutions

Today, glass blocks have become often used in interior design. With their help, you can bring to life original and bold ideas, it is beneficial to play with light. In the interior of an apartment, glass blocks can be used to create partition walls, furniture elements, decorative accessories, to decorate walls, windows and floors.

During the overhaul of an apartment, it often becomes necessary to redevelop the premises, which allows you to plan the living space in a new way, choosing a more convenient option for placing rooms. In this case, they are an interesting and original solution, which at the same time does not burden the space.

You can fill the room with light and air by decorating the window opening with glass blocks. It will be possible to get the maximum effect when combining the design with lighting, which is clearly demonstrated by photos of glass blocks in the interior of the living room and bedroom. The material is often used to create an internal window between the bathroom and the kitchen, allowing the first room to receive some of the natural light.

A non-standard solution is to use glass bricks as a floor covering. In this case, the surface of the products should have a rough texture, which will eliminate the possibility of slipping. They can also be used to create podiums.

The use of these elements allows the production of furniture designs. For the kitchen, you can make a bar counter or an island; for the bathroom, it is recommended to form glass blocks under the sink.

Important! Despite the fact that glass furniture looks extraordinary and original, it cannot be moved to a new place, since the structure is created permanently.

Various techniques for decorating walls made of glass blocks

It is recommended not only to use glass blocks for the construction of load-bearing partitions, but also to decoratively veneer the surface of the wall with them, thereby successfully beating the design of the apartment. In rooms that are deprived of natural light, such as dark halls, corridors and lobbies, an illuminated glass block wall will not only be a functional element, but also become an additional source of light. However, such a design technique will not deprive the room of an atmosphere of detachment and seclusion.

Related article:

Features of the finishing material. Product varieties. Mirror panel in the interior of premises for various purposes. Laying tiles.

The rounded glass structure will look interesting and unusual, which will noticeably enliven the interior design. It is also advisable to decorate various ledges in the wall with glass blocks, thanks to which you can visually expand the expanses of the room, making it airy and light.

The original solution is to decorate the surface adjacent to the stairs leading to the second floor, which is clearly shown in the photo of the wall made of glass blocks. A fake fireplace in the living room will look unique. With the help of glass blocks, you can also decorate a niche in the wall, which will undoubtedly draw attention to the elements that are in it.

Useful advice! For residential premises, when creating a glass block wall, products should be combined with other materials: drywall, chipboard or PVC panels.

Transparent glass or tinted inserts with backlight on the wall surface will look spectacular. Also, the material can be used to decorate the doorway in the living room. Here you should use elements with interior decoration in the form of pebbles, shells, herbariums or extraordinary installations, which should be selected taking into account the overall design concept of the room.

Glass blocks are preferably placed pointwise, thereby decorating the wall. In this case, one tile should be located on a plot of 1 m². This option is often used in the kitchen when making an apron. In the living room, one of the walls can be decorated with multi-colored blocks, thereby creating a decorative panel or a kind of picture on its surface.

The use of glass blocks for partitions

The main direction of use of glass blocks is the zoning of the premises by creating partitions. This contributes to the division of the total area into several small open areas. In this case, a lighter, free environment is provided, not cluttered with solid structures.

Partitions can be of various shapes: trapezoid, pyramid, oval, circle with holes made in the form of steps, arches or ziggurat. The glass structure can have different heights and widths. With the help of these elements, one should not only zone the room, but also create limited spaces in the form of showers or dressing rooms.

Useful advice! In small narrow rooms, it is advisable to arrange partitions made of glass blocks, since transparent structures contribute to an optical increase in the dimensions of the room.

When choosing the type of glass block to create a partition, the purpose of the room should be taken into account, since individual elements differ in the degree of light transmission and the nature of the light-scattering effect. The glass transparent design is ideal for creating a dining area in the kitchen.

To protect a cozy bed in the living room, it is better to use matte elements. In the bedroom, a multi-colored glass partition can separate the boudoir area or wardrobe. Also, the design will ideally fit into a room combined with a bathroom, for which any version of glass blocks is suitable.

Use of glass block partitions in the bathroom

In the interior of the bathroom, glass blocks look very organic. The rationality of using products is due to the strength, moisture resistance, environmental friendliness of the material, which at the same time is characterized by good transmittance of light-reflecting ability and remains opaque at the same time.

With the help of glass blocks in the bathroom - the photos clearly confirm this - you can separate the toilet bowl and organize a relaxation zone in the bathroom, which is a rational solution for combined bathrooms. Here it is better to use matte products that have sufficient impenetrability and do not visually overload the room. The partition in this case should be straight or curved, reach the middle of the height of the room or reach its ceiling.

With the help of glass elements, you can also make a screen for a bathroom or protect a place for water tonic procedures. Today, more and more often in modern apartments you can find shower cabins made of glass blocks, which have various designs, which makes the design of the room extraordinary and exclusive. At the same time, this design solution can significantly save money. In this case, the material can also be used for flooring, in which lighting should be additionally mounted, which is clearly shown by photos of glass block showers.

The process of building a glass block partition

The construction of a glass block partition in a bathroom, living room or other room will not cause difficulty for craftsmen who have dealt with laying tiles and bricks. However, there are subtleties here. Installation can be carried out in two ways: end-to-end with an adhesive solution, as well as on a special frame module, which is a grid with cells. The second option is easier to implement. Thanks to the modular frame, the future partition will turn out to be of better quality and even. However, such a lattice is difficult to find in the construction market.

As an adhesive solution, a special glue is used, a mixture for laying ceramic tiles or a cement-sand mortar with the addition of PVA glue at the rate of 200 g per 5 buckets of the mixture, as a result of which plasticity increases.

Useful advice! If transparent glass blocks are used for the construction of a partition, it is better to use a white adhesive composition, due to which the product will have a more aesthetic appearance.

For work, it is necessary to prepare glass blocks of the required size, adhesive composition, mounting plastic crosses, galvanized or stainless steel reinforcement bars, level, rubber hammer, sealant, colored grout.

Algorithm for erecting a partition from glass blocks

Before proceeding with the laying of glass blocks, it is necessary to clean the base and make markings, taking into account the dimensions of the product and the thickness of the seams. To determine the size of the frame, lay out one row of blocks, spreading crosses between them. Next, the installation of a guide metal frame of the required width and height is carried out, which is attached to the enclosing walls, floor and, if necessary, to the ceiling using dowels 50 cm long. During installation, it is important to constantly control the horizontal and vertical position of the module.

After preparing the surface, you should start laying glass blocks. The first row starts from the wall. An adhesive no more than 1 cm thick is applied to the lower part of the horizontal surface and the side of the vertical guide profile. Next, the first block is installed, which is pressed into the solution. An adhesive mixture is applied to its side surface and the next element is installed. Mounting crosses are placed between them on both sides, the dimensions of which correspond to the thickness of the seam. The row continues until it stops in a vertical guide located on the opposite wall.

It should be remembered that the adhesion time of glass blocks with mortar is longer than when laying ordinary bricks, so you should wait at least an hour before starting the construction of the next row, which is carried out according to a similar principle. If a cement-sand mortar is used, after installing three rows of glass blocks, the structure should be left to dry for at least 24 hours.

To create a reliable structure, every third row should be reinforced with metal rods, which, when laid on blocks, should not come into contact with them in order to avoid subsequent corrosion. This is controlled by mounting crosses.

After the solution has completely dried, work is carried out to clean the surface from the remnants of the mixture, the protective film is removed from the blocks and the joints are grouted. While the mixture is still wet, clean the glass surface with a soft cloth.

Alternative options for assembling a glass block wall

Instead of a metal frame, reinforcing bars made of galvanized or stainless wire with a diameter of 4-5 mm can be used. They are inserted into each subsequent row horizontally and vertically over the mounting crosses, immersing the rods, which should not come into contact with the glass, into the solution.

If a non-rectilinear glass block shower is being laid, a thicker reinforcing mesh should be installed, which will prevent the complex structure from shifting, and the masonry itself will have a neater appearance. Horizontal rods must be bent, giving them the desired shape. Mounting crosses in this case are located exclusively on the inside of the masonry.

The simplest but most costly installation method that can be implemented to create a partition of hollow glass blocks in a bathroom is to use a wooden or metal module with cells of the required size, where the blocks are inserted. The frame is pre-painted in a suitable color and fixed to the load-bearing wall. Each block is located in an individual cell. The joining points are fixed with a sealant. The design is ready for operation in 12 hours.

Modern glass blocks, thanks to the variety of shapes, colors and textures, are able to transform any room, making the design original and unique. With the skillful use of such a versatile finishing material, with a developed imagination, you can make any boring and ordinary space sparkle with new colors.