| Vidnoe, Moscow region

Fuel briquettes Pini & Kay. Briquettes are made from coniferous and deciduous wood. Pini & Kay briquettes comply with European standards, often these briquettes are called EUROFIREWOOD, or EUROBRIQUETS. The production of fuel briquettes Pini & Key (eurowood) is based on the principle of screw pressing. Wood briquettes Pini & Kay (euro firewood) ...

85 rub./pack.

In stock

| Moscow

Advantages of fuel briquettes The main advantage of a briquette is that the combustion temperature is 1.5-2 times higher than that of firewood. At a moisture content of 20%, the calorific value of wood is 2500-2700 kcal / kg, the briquette is 4500-4900 kcal / kg. And there are simple and logical explanations for this: 1. Briquettes have low humidity. The lower the moisture content of firewood, the higher their heat transfer. ...

100 rub./pack.

In stock / Wholesale and retail

On order

| Moscow

Fuel briquettes. Advantages: 1 The capacity of one press can reach 2000 kg per hour. 2 Screws are enough from 50 to 100t before recovery. 3 Quality and reliability of the equipment we give 3 years of a guarantee! 4 The profitability of briquette production is more than twice that of all competitors. The resulting briquette Pini Kay corresponds to...

On order

| Moscow

Fuel Briquettes Pini Kay Fuel Briquettes RUF Characteristics Briquettes Pini Kay Packing weight (kg) 10 Packing, piece 10 Ash content no more than 0.5% Humidity 6-8% Consultation and order acceptance by phone. Delivery free of charge.

130 rub./pack.

In stock / Wholesale and retail

| Moscow

We buy fuel briquettes of the Pini Kay type on a regular basis, faceted 8-sided and 4-sided Wood species: oak/beech Packing 10 kg We have the opportunity to purchase products year-round on the EXW terms in rubles with VAT and without VAT, and on the FCA terms in euros. We will be glad to receive your suggestions!

On order

| Moscow

Plants for the production of fuel briquettes Pinikey. Equipment productivity from 1000 to 1500 kg per hour. Presses both sawdust and wood chips. Reliability of the line is more than twice as high as competitors, 3 years warranty! High profitability achieved...

Under the order / Wholesale and retail

| Moscow

1200 kg. hour and 2000 kg. hour. The auger is enough for 50-100 tons of finished briquette (sawdust, wood chips) until restoration. When working with other raw materials, you need to make a request. Dies for 200-300 tons of finished briquettes. Installation supervision, commissioning and training of service personnel are included in the cost of equipment. Hardware Warranty 3 ...

Under the order / Wholesale and retail

The modern market for heating materials is very wide and full of proposals for the purchase of different types of fuel, the energy efficiency of some of them can be doubted. In turn, in this article you will find information about fuel briquettes from manufacturers that are currently considered brands and leaders in their field. We will talk about the features of fuel briquettes from Ruf, Pini Kay, Nestro and Nilson.

Fuel briquettes

Fuel briquettes Ruf

Ruf is a manufacturer of fuel briquettes, consisting of sawdust and waste of good hardwood and softwood. For all that, the composition does not contain bark and other illiquid materials of the wood industry.

Fuel briquettes Ruf do not contain chemicals based on glue. And this is their main advantage. This is due to the technology of manufacturing briquettes on a special complex of technical devices.

As for the production technology, Ruf briquettes are made in two stages:

1. Drying, which is necessary to reduce the percentage of moisture in wood chips and sawdust.
2. A hydraulic press that produces self-forming timber material into briquettes.

The output is briquettes, in appearance resembling a brick.

Fuel briquettes Ruf

Technical characteristics of fuel briquettes Ruf.

It is unlikely that these indicators will be informative for the average person. For example, let us give the parameters of other types of fuel according to some of the characteristics.

This information is enough to understand that Ruf fuel briquettes are quite effective. This is confirmed by the reviews of the owners of country houses.

Reviews

On the network you can find a lot of reviews about fuel briquettes of this manufacturer. And mostly good ones. Users note the following positive qualities of Ruf fuel:

1. No characteristic crackling, as well as sparks flying out.
2. High heat output with long burning.
3. Good moisture resistance.
4. Practicality in application.
5. It is possible to increase the heat output of the boiler if briquettes and logs are evenly placed in the combustion chamber. In addition, fuel consumption will decrease by an average of three times.
6. Fuel briquettes Ruf from birch dust do not leave soot and tar scale on the walls of the furnace, which in turn makes maintenance of the boiler much easier.
7. The manufacturer's briquettes do not require much storage space. In addition, the cleanliness of the warehouse will always be.

Fuel briquettes Pini Kay

Fuel briquettes of this manufacturer are popular due to their unique characteristics, and have many positive user reviews.

It is worth saying that Pini Kay fuel briquettes should be stored separately from other materials and substances. If the following conditions are met, products can lie for a very long time:

• it is required to store briquettes in a covered warehouse at a temperature from plus 5 to plus 40 °C;
• relative humidity should vary between 30-80%;
• briquettes should not come into contact with water and aggressive media;
• to prolong their shelf life, it is better to remove products from the sun.

Fuel briquettes Pini Kay

Reviews

Reviews of fuel briquettes from this manufacturer are mostly positive and are as follows:

1. Pini Kay fuel briquettes do not pollute the surface in contact with them during transportation and storage.
2. Universal shape and small size, allowing you to stack briquettes tightly on pallets.
3. Small ash content of 3%.
4. High density, exceeding the parameters of wood by 2.5 times.
5. High bulk density. This option is of interest to many buyers. They compare the figure with 300 kg/m³.

Fuel briquettes Nestro

The production of Nestro fuel briquettes is carried out on hydraulic presses with the creation of back pressure with a collet. These products can be in diameter from 50 to 90 mm, and in length - from 50 to 100 mm. Packed in bags.

Since the Nestro fuel briquette is a compressed fuel, it needs little storage space. In addition, the high density eliminates the penetration of moisture inside and subsequent decay, so they can be stored for a long time.

Very little torch or liquid is required to ignite Eurowood. A couple of briquettes are usually enough for a fireplace. After ignition, they burn with an even flame and spread a woody smell, and after burning, beautiful coals remain, maintaining a high temperature for a long time.

Fuel briquettes Nestro

– Pini Kay eurofirewood does not need to be dried and cooked, they do not need special ovens and equipment. Piny&Key briquettes are hard and extremely resistant to mechanical stress.

High calorific value

The calorific value of Pini Kay fuel briquettes is 4900-5100 kcal/kg, which significantly exceeds not only the calorific value of ordinary firewood, but also RUF fuel briquettes. More heat, with less firewood;

Long burning time

The time of burning and subsequent smoldering is higher than that of "ordinary" firewood. The burning time of wood briquettes is up to 3 hours (in furnaces with adjustable air supply). The high duration of burning increases the time interval between filling the furnace with fuel, which significantly increases the usability. Comfortable temperature with less fuel loading.

Easy ignition

Ignition of fuel briquettes does not differ from ignition of ordinary firewood. However, eurofirewood can be ignited with special liquids (for example, those used to light charcoal) or ignition gel. Due to the low humidity, the briquettes quickly flare up. Fuel briquettes Pini Kay are easy ignition and fast heating of the room;

high density

– Of all types of fuel briquettes, Pini Kay has the highest density

Safety

The burning of fuel briquettes, unlike classic firewood of various types of wood, is accompanied by the release of a minimum amount of smoke, they do not spark and do not “shoot”. High safety at high calorific value.

Purity

Due to the low humidity, the briquettes emit less soot and pollute the chimney less. The ash content of Pini Kay fuel briquettes is about 0.3%

Convenient storage

Due to even proportions and high density, fuel briquettes can be stored in several rows, which allows you to store much more fuel per unit area, compared to conventional firewood. Wood fuel briquettes are easy to store and transport

What is Pini Kay (Pini Kay)?

The phrase known to many today - Pini Kay (Pini Kay) - these are fuel briquettes, which are obtained during the processing of waste from wood and other materials. For those who do not know, today it is an ecological solid fuel for various stoves, fireplaces and boilers. They are used for devices of various purposes and types. They are an excellent alternative to fossil fuels such as coal, gas, fuel oil, etc.

Name and product history

This name has a rich history and comes from the Austrian manufacturer of Pini Kay presses for briquettes. At the moment, this company no longer exists, but the name has gained a new life and history. The pinica is pressed in an extruded way with the help of a screw and at the same time the surface is heated with heating elements. Often, Pini Kay (Pini Kay) take on a four-, six- or octagonal shape with a hole in the center. This hole, which is made along the entire length of the Pini kay, creates additional traction when burned. This property makes it possible to use pinecones in furnaces with low draft. But on the outside they are covered with a dark crust, the reason for this is the firing of the surface. PiniKey eurofirewood is cut with a miter saw. Often, with dimensions of 25-30 cm. They can also use devices to break them into the same pieces - bars.

Types of Pini Kay (Pini Kay)

Like any other types of fuel, Pini Kay (Pini Kay) have their own types. Actually, they are divided, depending on the material from which they are made. Thus we have four categories:

• Wood briquettes are made from wood chips, sawdust, low-value wood and other waste
• Vegetable briquettes are made from waste after agricultural processing, for example, sunflower husks, straw, grain husks, cereal waste, etc.
• Peat fuel briquettes pinikay
• Fuel briquettes from waste coal

The names of the last two groups speak for themselves.

Applications and benefits of Pini Kay fuel (Pini Kay)

Today, Pini Kay (Pini Kay) have gained wide popularity and are used for a variety of purposes, consider some of them:

1. It can be used to light a fire, for example, on a hike or in the country.
2. Can be used for heating houses, warehouses, industrial and industrial premises
3. Can be used on trains where it is necessary to heat the carriages
4. Can be used for cooking barbecue, steaks and other products in the grill, grill, barbecue.
5. Can be used to produce high quality charcoal.

Now consider the benefits of Pini Kay (Pini Kay)

1. Fuel briquettes Pini Kay (Pini Kay) have a high calorific value - 4900-5100 kcal / kg. This is many times more than the calorific value of conventional firewood, as well as RUF fuel briquettes. Thus, we get more heat, with less fuel - briquettes.
2. The duration of burning is much higher than ordinary firewood, in addition, fuel briquettes smolder for a very long time. For example, in ovens where you can regulate the air supply, Pini Kay (Pini Kay) can burn up to 3 hours. Such a low burning rate increases the time interval for laying briquettes in the furnace. And it's very convenient! Thus, we get a fairly comfortable temperature with a lower frequency of fuel loading.
3. Burning PiniKay is not accompanied by a huge amount of smoke and sparks like ordinary firewood. Which, of course, will protect the room from a possible fire.
4. They ignite very quickly due to the low humidity. You can use lighter fluid.
5. They don't leave a lot of ash behind. The ash content of Pini Kay (Pini Kay) ranges from 0.2 to 2.5%.
6. Ease of use. No need to pre-dry and prepare like firewood. Also, no special equipment is required to use it.
7. Affordable price.
8. Saving storage space. Due to the high density and evenness of the Pini Kay surfaces (Pini Kay), they can be folded in several rows without using additional space.

Thanks to all the above advantages, we get environmentally friendly fuel that burns longer, burns better, does not leave a lot of waste, and even if it does, it can be used as fertilizer. Pini Kay is pure benefit. They save your money, effort, time and nerves!

Wood fuel briquettes Pini Kay (Pini Kay) from coniferous and deciduous wood - high calorific value and low ash content. Better than wood!

Fuel briquettes pini kay today are very often used for making fire in a fireplace, stove and for burning wood heating boilers. They are good for a country house, and for a bath, and for a barbecue, and even for a fire. When burning, the briquettes do not give sparks, practically do not crack, do not “shoot”, almost do not smoke at all. Unlike ordinary firewood, pini kei does not need to be dried, they flare up quickly. It is very important that the Eurowood does not include any chemical additives and glue. They get their shape using the pressure of a screw press, in which the natural gluing substance lignin is released from the sawdust. Thanks to this manufacturing technology, the density of briquettes reaches 1.4 kg/dm 3 . During the combustion of this type of fuel, you will not feel any pungent foreign odors, the surrounding air is not filled with harmful chemical compounds.

Pini kay is a solid polyhedral cylinder with a through hole in the center. This creates an additional draft of air through the briquette, which helps to easily and quickly start a fire and maintain it even with not very strong draft in the furnace.

This type of fuel is made from dry sawdust, which is compressed under high pressure, and at the end is slightly burned on the outside. The result is logs of very high density. Polyethylene packaging - 12 cylinders each, as well as the hardness of the briquette, allow them to be folded for the whole winter just under a canopy outside. They are also very convenient to stack for storage or transportation. Due to the fact that the briquettes are packed, there is no garbage from them at all, unlike firewood.

Pini kay is one of the densest (denseer than Ruf) modern fuel briquettes. Therefore, they have the longest burning time, which is very convenient - you do not often need to throw them into the oven. The ash content of pini kay is very low, which allows you to clean the chimney less often than conventional firewood.

Buying Pini Cay euro firewood means that your heating costs will be significantly reduced!

An excellent replacement for fossil fuels: coal, gas, fuel oil, etc.

The name comes from an Austrian company that produced briquette presses.

The pini kay price in Moscow is one of the lowest!