How to update old interior doors, everyone chooses the option for himself. I will only talk about some of the methods and decors that can be used in practice.

So:

• First, remove the door from the hinges and get to work.

Tip: If the door does not give in and does not want to come out of the hinges, then you need to put a lining on the floor (so as not to spoil and push through the floor), we start an ax, a mount or a wooden block under the bottom of the product and, using a little effort, raise it to the top.

Wallpaper fragments

• If the door is covered with paint, then the paint must be removed (see). This can be done with a grinder, wearing a large emery nozzle or a grinder. It is better to perform work on the street or on a balcony (loggia).

Attention: when working with a grinder and a brush, use a respirator, goggles, trousers and long-sleeved clothing.

When working, metal hairs sometimes fly off the brush. After cleaning from paint, the door must be cleaned of dust. Clean areas where not cleared by hand. We take putty on wood and make up dents and chips.

It is shown how to create an original way of drawing on the door using squares.

Drawings

The drawing can be created using a stencil or masking tape.

Tip: After applying the paint, it is better to remove the tape immediately, because after drying, the tape, when removed, can ruin the drawing, chipping off pieces of paint.

This pattern can be found on various posters and calendars. Only glue on the door, we try to remove air bubbles, this can be done with a rubber spatula or roller.

The principle is the same as for wallpapering:

Holes and dents

one way

If there are chipped dents on the door, we additionally clean them and treat them with a primer on wood.

You can lightly burn the wood with a blowtorch or gas burner along the edges and in the middle of the door, but do not hold the fire, but just hold it so that the coating darkens a little. After that, wipe the burnt places with a damp cloth to remove soot.

Second way

There is another way to close holes and dents:

• We take small, preferably like flour, sawdust (they can be collected after working on wood with a grinding machine, with a fine emery nozzle) and mix with PVA glue and close cracks and dents.
• Mix, adding more sawdust.
• After drying, we pass the places with sandpaper. This is a very good way after sanding, the difference is almost imperceptible.
• If we want to preserve the texture of the wood, then we pass the door with a light stain.
• Lubricate the hinges and put the door in place.

After reading this article, you will no longer think about how to update an old interior door.

loops

If the interior doors are old and the hinges (see) are smeared with paint or rust, this can be easily fixed.

So:

• We remove the hinges, insert them into a vise, take a grinder with the same nozzle with a brush iron and process it, wring out the vise and turn it over.
• Lubricate them completely with grease, oil and put in place.

Advice. If the old nests from the screws are broken and when fastening the hinges, the screws fly in, then we take a piece of wood chips, cut it approximately along the diameter of the socket and drive it in until it stops, break off the end.

Decor

Door without glass

The photo shows how to update an interior door using simple and affordable materials (see).

Decor with fabric and wallpaper:

• We take not thick cardboard as a basis, cut out a 20 × 20 square and make a window in the middle.
• Choose wallpaper and glue on a square
• We cut off both the middle and from the edges, only so that the edges can be hidden by gluing at the back.
• We select pieces of any fabrics in this window and glue it into the resulting frame, you can use a thin mirror.
• We plant the finished structure on liquid nails to the door using an ordinary level.

Please note: You can rotate the square by 45 degrees and glue it with a rhombus, you can use any shapes.

Some points we take into account:

glass door

"Separate" the door

Here is a way to ennoble old interior doors with glass. It is conditional, as it were, to divide it into parts with wooden or plastic strips, gluing them against each other on both sides of the glass with sealant or PVA, you can use liquid nails.

You will get several artificial windows in place of one glass. And interior old doors take on a new look, changing the picture familiar to the eye.

Glass painting technology

Paints on glass are:

• acrylic - paint on glass.
• Acrylic polyurethane-coloring of glass and ceramics.
• polyurethane water-based enamels - on glass and drawing patterns on mirrors.
• industrial enamels - on glass with forced drying at a temperature of 150 gr. FROM.

There are good options on how to update old interior doors so that it would be cheap and look like a million dollars):

• Before work, degrease the glass with an ammonia-based product and rinse with warm water; it is better to use a microfiber cloth for wiping.
• We prepare the paint, select shades by tinting, the base polyurethane enamel is stable and can be stored for several months.
• Before application, a hardener and a promoter are introduced into the tinted solution.
• hardener - 10% per 100 gr. Colored solution. Mix everything vigorously. at 1000–1500 rpm
• promoter - 3% per 100 gr. Colored solution, when working, the enamel should be filtered, it is best to use a filter of 50-150 microns.

The thickening time of the finished mixture is 2–3 hours at 20–28 degrees, as the temperature rises, the solution hardens faster. When thickening, the mass can be diluted 3–8% by adding clean water.

A drawing of a tiger made using a stencil. how to ennoble old interior doors or glue them over

The next step is to apply a stencil on the old interior doors:

We try to glue it so that there are no wrinkles and the stencil fits snugly against the surface. We use a sponge as a brush, if there is a manual sprayer, then even better. You can choose the background yourself, and update the interior doors.

About paint (technical specifications)

Here we give way to the white color, I will explain.

When adding color, white paint can be turned into any color and shade. (cm. ).

Acrylic paint:

• Dry residual weight - 30-38% by weight.
• The density of the paint from the manufacturer in containers (specific weight) is 1.14–1.18 kg / liter.
• Material consumption -80-100 ml/m². varies depending on the thickness of the applied layer
• Diluted with water.
• Hazard class-No.

Attention! You should always buy paint, with a margin and one batch, if it’s not enough, look at the article on the bank and buy the same one (batches may be different and the paint may differ in tone).

Conclusion

I told you how to update interior doors on your own and noticeably transform them. But in the same way, you can ennoble the input structures, but this is another topic. There are many other ways to update an interior door.

Even simpler ones:

• paste over it with wallpaper, or self-adhesive tape with drawings.
• It is also permissible to glue the door with a cloth.
• You can also use photo wallpapers, 3D drawings or posters.

There are many ways and many opportunities for a flight of fancy, now everything is in your hands, go for it!

To begin with, "let's draw the image of the enemy", that is, we will understand what it is in a battered car that repels us.

Dents on the body;

Damaged or missing trim parts;

Broken, faded lighting fixtures;

Areas with corrosion or damaged paint;

Untidy wheel rims;

Dirt and dust on the body.

Of course, if your car has a hopelessly driven body and rust holes alternate with patches of peeling paint, it will not be easy (and most importantly, not cheap) to make a “candy” out of it. But often the appearance of the vehicle spoils the "full set" of minor flaws that are easy to fix.

In addition, do not forget that few people will consider your car, coming close. Most of the "observers" see other cars from a distance of a dozen or more meters, which means that the smallest defects in your car can be ignored, while trying to eliminate the most noticeable ones.

Under the ruler

Just a catastrophic feeling of untidiness is created by the unevenly sagging suspension of the car. Raised "stern", the front leaning on one side, the wheel rubbing against the arch of the wing - it seems that with such external data there is a direct road to the disposal site. But sometimes it is enough to change a single spring or spring to correct the posture of the car. It is also necessary to deal with this issue because a skewed car is worse controlled.

If you have a domestic model of the Soviet period, keep in mind that all the cars of that time were drawn by designers under a full load state. That is, the old "our brands" look most harmoniously and expressively on a crouched suspension, and if the geometric cross-country ability does not matter to you, while aligning the car's posture, do not strive to increase the clearance.

Also, the impression of a crooked body is reinforced by poorly fitting, unevenly installed doors, a hood, and a trunk lid. You can often adjust them yourself, only due to the provided adjustments of the hinges and locks. Bumpers also play a big role, or rather the accuracy with which they are docked with other parts of the car, since the border lines are usually long, the slightest distortion immediately becomes noticeable.

As well as the broken lines of the gaps between the body parts, the bent, poorly joined trim parts - moldings, linings "bent" the car nicely. Since the original parts of this group are often not cheap, here you can resort to modern tuning accessories - self-adhesive soft plastic moldings. By the way, if, thanks to a well-chosen color, size and location, such an overlay is clearly visible on the car, it will not only help visually align the body, but also partially divert attention from painting defects.

Attention to detail

The originality of components available for public viewing positively works on the image of any "old woman". "Native" bumpers, mirrors, optics, even on the most shabby copy, will create such a touch of retro authenticity, and this always commands respect. At a minimum, try to use external parts, albeit not standard ones, but from related models or, at worst, from the same historical period as your car.

Another little thing that will help to make the car a little prettier for an inexpensive price is the replacement of aged lighting fixtures. For most domestic cars, these plastic parts can be found new - both Soviet-made and remake.

Small pockets of corrosion that have damaged the paint in prominent places are easy to eliminate on your own: clean the rust with an emery cloth, and use ... nail polish instead of paint. In haberdashery stores, you can, with a certain degree of accuracy, match the tone to most automotive colors. Of course, such a “painting” cannot be called ideal, but from a distance of a dozen or two meters the car will look much fresher.

On an old car, chrome parts always look spectacular (especially if the car is dark in color): radiator lining, bumpers, wheel caps, mirror and lighting fixtures, windshield wipers, moldings, glass frames, headlight rims. Take care of them and, even if there are later versions of these components in black, try to find and mount chrome.

Here already, most likely, you will have to face some difficulties. So, well-preserved shiny parts are usually not cheap, but at disassembly prices are quite democratic. Keep in mind that late-model rims often don't have lugs to secure hubcaps, but car dealerships sell bracket kits that use wheel bolts or nuts.

Role of wheels

Those who want to make their old car more attractive should pay special attention to the wheels as one of the most noticeable elements of the exterior. (We don’t talk about the fact that there should not be bald rubber on the disks, since this is not only beauty, but also safety.)

The most common visible wheel imperfections are dented rim flanges and peeling paint. Crumpled metal can be rolled on a machine in a tire shop, but skillful straightening with a hammer also gives a completely satisfactory result. Traces of corrosion will have to be removed with a metal brush and sandpaper. You can restore the coating with paint from an aerosol can, and as a completely budget option, an elementary brush will do - the flaws of this method will be visible only from five steps and in our case will not matter.

All the problems of the rims, of course, in one fell swoop hide the large modern-style plastic hubcaps, but they rarely fit stylistically with cars of older generations and usually seem alien on them. But chrome hubcaps (again!) on cars of the generation up to the beginning of the 1980s are much more appropriate. In car markets, this decor is found in abundance at quite affordable prices.

It is the wheels that allow "with little blood" to give a battered car some zest. Flippers - white rings for the sidewalls of tires - were fashionable in the 1930s-1960s. This accessory gives the car (of the corresponding generation!) an elegant look, but the flippers produced today are not cheap, since they are intended primarily for retro cars. However, at various flea markets, these products are found quite often and in a satisfactory condition.

Many owners of a summer cottage or a private house want to see on the territory adjacent to the house not only beds, fruit trees and shrubs, but also decorative elements that improve mood.

After all, a summer cottage today is, first of all, a place of rest, where it is pleasant to spend time after a hard day or a whole week.

Even a small plot can be turned into an attractive and cozy area that combines several functions. Each person equips and decorates the local area in his own way, depending on the means, effort and free time.

How to improve the suburban area? There are a lot of options, and it is not at all necessary to implement everything you see and read on your site. Set priorities and take action. And now, step by step, we will move forward and equip our summer cottage. And so on the way!

Step one. A well-groomed lawn is the key to success

Sometimes it is enough to equip a small area, and the appearance of the site will change significantly for the better.

True, to maintain such beauty will have to work hard. Only when certain actions are performed, the lawn will be beautiful and well-groomed:

• high-quality planting material adapted to your climate;
• processed and neat edge of the lawn (it is possible to use a curb tape);
• timely beveling of grown grass;
• top dressing, weeding, watering and "repair" of the green carpet.

Unusual lawn shapes will give the site a special decorative effect.

Step two. garden paths

It can be a step-by-step path made of concrete slabs,. You can decorate the path with brick or any stone chips, make it from ordinary paving slabs, and lay it out with mosaics. Choose the option that is acceptable for you, corresponding to the general appearance of the site and the house.

Step three. decorative arches

Is a green lawn not enough for you? The garden path pleases, but is something missing? Then we move on. On the way we will install or a pergola. The structure entwined with climbing plants will decorate the site, inviting you to go to the garden or recreation area.

Several arches, installed one after another, will over time be overgrown with plants so that they will create a pleasant shady corner where you can hide from the scorching sun and take a break from work.

The choice of plants for arches is great: from ordinary girlish grapes and ivy to flowering vines (honeysuckle, clematis, climbing rose). But girlish grapes will delight you during the season with a variety of their colors: soft green leaves in spring, rich green in summer, and especially beautiful reddening leaves in autumn.

Step four. Flower beds and flower beds

Flowers and various flower arrangements give a special decorative effect to the site. To make such compositions look beautiful, it is better to arrange them in the form of flower beds or with the selection of planting material that is appropriate in color and flowering period. The composition of the flower bed can be both annuals and perennials, flowers and ornamental herbaceous plants that differ in height.

You can plant plants in the form of a border along the lawn.

Or organize a dense flower bed of different heights somewhere in the center of a green lawn.

And how many options exist for the design of flower beds. This includes framing them with various materials: wattle, a wooden fence or brick around the perimeter, wooden saw cuts or decorative cuttings, a fence made of plastic bottles; or completely unusual and even household items.

An ordinary old log that has lain somewhere on a plot or in a forest for a long time can become an attractive flower bed. In the same way, you can decorate the stump of a sawn tree or an old tub.

Many people fell in love with an unusual design move - decorating the garden with worn-out vehicles (cart, bicycle, boat). Decorated in the form of flower beds, they become the main art object in the garden.

And even an old retro car, which has stood idle in the grandfather's garage for a long time, can become an element of the landscape.

Alpine slides are especially popular. But to create them, it is sometimes necessary to correct the relief of the site and select the “right” stones. On a flat, even terrain, a hill made of round cobblestone and decorated with plants will look like a "dog's grave". Such a slide will be random and will not bring additional beauty to your site.

Particular attention should be paid to the selection. Stones are selected not only in shape, but also taking into account the plants that you plan to plant in this composition.

Of course, flowers also require care: weeding, feeding, watering, otherwise a beautiful flower bed will turn into neglected thickets.

If there is not enough time or space, but if you want to certainly decorate your summer cottage, use flower pots, tubs or garden flowerpots to plant unpretentious flowering plants. Such elements are easily transferred at will from one zone to another.

As flowerpots, you can use any utensils that have become unusable (pots, buckets, watering cans), and here you can show creativity. Decorate products with mosaics, paintings, paste over them with wooden slats, braid them with a tourniquet or vine - everything that your imagination is enough for.

You can also use old shoes as a planter - a very interesting and original solution.

Step five. Arrangement of a reservoir

We continue to move on. What else to decorate the backyard? How about we dig a pond? On a fairly spacious area, you can place a pond or pool. With a lack of space - small or. This building will certainly become a highlight of the landscape.

To equip the pool, considerable funds and appropriate preparation are needed. And everyone can build a mini-pond. To create a reservoir, you can purchase ready-made plastic forms, or make a concrete base. An old bathtub is also suitable as a bowl.

Much attention should be paid to the external, planting and.

A bridge built across a pond or stream will add even more decorativeness to the overall composition.

We continue to move. Step six - decor

Decor is a set of elements for decorating something. Our task is to decorate the suburban area. What else can be done to decorate the territory, in addition to the above methods?

Garden sculpture is an object designed not only to decorate the garden, but also to attract and stop the eye. Garden sculpture should correspond to the general style of the garden. It is very important not to overload the territory with these elements.

If there is a path of wooden saw cuts on the site, it is quite appropriate to decorate some part of the fence with the same saw cuts.

The wattle fence goes well with landscape elements decorated in the same style.

You can decorate the fence with various hanging elements, painting, or creeping plants - lianas. Flight of fancy is not limited.

An integral part of the garden decor is garden furniture. And everyone chooses it in accordance with their taste and style of the house.

A table set in the shade of trees is not only a decoration of the site, but also the main place for the family to gather for dinner, tea and conversation.

Step seven. Beautiful beds

Even the most banal ones can become a real decoration of a summer cottage with an appropriate approach to their design.

The beds, decorated in the style of a regular French garden, combine two functions at once: beauty and rational use of the territory.

A garden bed, decorated in the form of a flower bed, will undoubtedly decorate any suburban area.

In this case, the beauty of the beds is achieved by a well-chosen assortment of plants: both in shape and color.

This is not the end of our journey. We are just making a stop. Ahead of us are waiting for new meetings and topics for discussing summer and near-dacha topics. Ahead of spring and summer - the time to bring ideas to life.

Owners of country houses or dachas have to maintain not only the house itself, but also the area adjacent to it. And almost every summer resident wants to see his land not only functional, but also attractive and original.

How to ennoble a summer cottage without spending large material resources? Some design ideas are so simple that anyone can use them, even if they are not an experienced gardener. Let us consider in more detail the options that can be used to decorate the garden.

Beautiful flower beds, flowerpots, flower beds

Ordinary flowers in pots and small flower beds, unfortunately, do not look original and quickly become boring. But there is a way out: it is necessary to collect all the old utensils, household items that have fallen into disrepair and are gathering dust in attics and sheds. It is antiques that can transform and create a unique style of your site.

Such items include:

• leaky watering cans and wooden barrels;
• old stools, benches and chairs;
• broken bicycles, car tires;
• jars, troughs and porcelain dishes.

Barrels successfully turn into beds for climbing plants. We fill the containers with earth, make holes and plant crops. Extremely unusual, but beautiful flowerpots also come out of sinks or toilet bowls.

Tires, stacked vertically on top of each other, will perfectly serve as a flower bed. When the flowers begin to curl and grow downwards, you will get a beautiful flower fountain.

A broken bike can also be turned into an original planter. Instead of seat and steering wheel, we install potted flowers. Just do not forget to fix the design.

Chests, grandmother's suitcases, wicker baskets - why not flower beds? If they look untidy, you can cover them with a special agent that protects the tree from rotting.

Note! The stump that is usually left over from felling trees can become a natural pot for planting a variety of plants. We uproot, clean the core (make a bowl), cover it with earth and plant flowers.

We remove the seat from the old stool or chair, install a container with earth and plant whatever your heart desires.

Metal headboards from the beds will be an excellent support for rose bushes, raspberries or climbing plants.

A broken vase, fragments of porcelain dishes will come in handy to create an original stream. We put a vase or jug ​​on its side, fill it with soil, lay out a kind of small stream around glass or porcelain and plant any plants. You can create the impression that streams of moss, young or sedum flow out of the jug.

Shoes, torn boots and boots, arranged in a chaotic manner, will create a collection of unusual lawns, with flowers of various shapes planted in them.

Garden figurines and sculptures

Shady areas of the garden, where there is little vegetation, will be perfectly complemented by straw effigies, figurines of gnomes and sculptures of brownies. If the area is small, then the figures, respectively, should be miniature. In the garden of a large area and figurines can be made larger.

Note! Painted rounded stones look very impressive. Of these, you can make deer, ladybugs, hedgehogs and much more, most importantly, show your imagination.

Various characters of cartoons and fairy tales, all kinds of animals and birds are perfectly obtained from tires.

By the way, ordinary plastic bottles are a cheap and affordable material from which you can create an original decor for a country house composition.

Fountains, artificial reservoirs

When the suburban area is large, you can build a pool or a multi-level fountain. But what if the garden is small in size, but you really want to have a pond? In this case, it will be enough to dig a hole of the required size and install a bathtub or any plastic container in it. If there is no bath or container, you can simply use polyethylene. We line the bottom with a film and fill it with water. The edges can be beautifully decorated with flower beds or pebbles, pebbles, small cobblestones.

Note! Do not install such a pond in a sunny area, the water will quickly evaporate, and mud will appear in the pond.

An existing pond can be perfectly transformed with the help of flower beds floating on the surface. Making such a flower bed is very simple: we take a plastic container, make small holes in the bottom, line the geotextile and fill it with soil. On top, you can plant your favorite flowers and lower the structure into the water.

Note! To prevent the flower bed from sinking, the container is fixed on the foam.

Bright and original garden paths

Paths and paths on the backyard will look attractive and cozy if they are lined with small stumps, twigs, pebbles, mosaic tiles or fragments of multi-colored plastic. Any material must be laid on a sand and gravel base.

Note! If your tile is worn and does not look aesthetically pleasing, then simply remove it and plant small flowers, moss or stonecrops in this place.

Flashlights

To make your dacha pleasing to the eye not only in the daytime, but also at night, you should think about lighting, but not just install lights or hold light around the perimeter, you can make the site fascinate and attract attention at night. And simple tin cans will help with this. We take a jar, draw any interesting drawing, make holes according to the drawing with a nail or awl. It remains to paint the body in a bright color and attach a wire handle. We install a candle inside. You can fasten several cans and hang a garland of them in a certain area of ​​\u200b\u200bthe garden. Glass jars are also suitable for decoration. We paint them with acrylic paints and set candles.

Making an original and attractive garden plot is easy. A little effort and you will want to admire the masterpieces that you have made yourself again and again.

Video

Landscaping Ideas:

How to fix the shortcomings of a small area with landscape design:

A photo

Decorating and decorating your country allotment is always a pleasure. This is a creative and fun activity. Many owners of cottages and private houses often think about how to ennoble the site, but do not take any action, thinking that this is a very costly pleasure.

It turns out that if you wish, you can do all the work yourself with minimal cost. It is enough to determine for yourself the main direction of events, prescribe a sequence of actions and make a list of materials. Maybe some of the necessary things are available, and some decorative items can not be bought, but made from old, unnecessary things, shoes and household items.

A few important tips on how to ennoble a summer cottage:

• If it is planned to use various plants to decorate the territory, then they must be harmoniously combined with the original landscape, organically making the transition from specimens with small foliage to larger and brighter crops.

• Decor elements made from the same materials and old things should be placed on the site in one place, generalizing the color scheme and combining the sizes of all objects.
• You can beautifully beat even sawn trees, turning a stump into an elegant chair or small architectural form. Wood cuts can be used for laying paths or arranging a recreation area.

• The most effective and affordable combination of landscape elements is stone and plants, which can be combined in different places on the site or lay out a separate zone in the form of an alpine slide or rockery.

Preparatory stage

Having made a general idea for yourself, it is necessary to draw a plan of the site, on which to outline the future location of decorative elements and functional structures: small architectural forms, ponds, flower beds and other types of landscape design. This is done in order to avoid frills, piling up objects, garden furniture or plants. Realizing the planned picture of the future garden, you should not deviate from it even a step. Even one extra flower bed, placed in the wrong place, can disrupt the harmonious composition of the garden.

At the preparatory stage, they get rid of everything unnecessary that spoils the look of the garden and does not carry a functional load in it. They form the basis of future elements: an alpine slide, a rock garden, waterfalls and other landscape details. In advance, it is necessary to provide for the organization of the slope, the supply of water for irrigation, its removal and the general drainage system on the site. Schematically outline the location of paths, the contours of a stream or reservoir. Next, start work on the improvement of the garden area.

Structural arrangement

When landscaping a garden plot, you should think about fencing the territory in a timely manner. The fence can be made in the form of a permanent building made of brick, concrete or metal structures. Modern trends in landscape design favor fences made from living plants, evergreen bushes and trees. Such plants perfectly perform enclosing and protective functions, forming a dense wall of branches and leaves during growth and proper care.

Wooden fences always look stylish and original, for the construction of which you can use a picket fence or a solid board. The most modern enclosing structure made of wooden plank is a vertical overlap fastening. The main thing is to prepare in advance a reliable basis for fixing the boards and, after their installation, carry out high-quality wood processing to protect against climatic phenomena, bugs and mold.

It looks very impressive on the territory of the "living arch" of special plants. In order for such a design to please its owners for a long time, it is necessary to build a reliable frame of a pre-selected shape from metal rods in advance. Planted climbing plants in the process of growing along the arch frame will need to be cut in a timely manner to create a beautiful, smooth shape.

We decorate the garden area

Broken or old furniture can be successfully used to create original and unusual decorative elements for the garden. With the help of inexpensive facade paint, objects can be repainted in bright, rich colors that will look stylish against the backdrop of greenery and flowers. Any furniture is suitable for such a decor: chairs, chests of drawers, cabinets, armchairs and other elements. Annual plants or lawn grass can be planted in drawers, and planters can be hung on chairs or whatnots.

Traditionally, used car tires are used to decorate the garden. They can cut out various structural elements, repaint the rubber in any color. Vertical structures made of wheels look non-standard and exclusive, which can be used for plants and decorating a playground.