Solenoid valves provide the simplest way to control and regulate the flow of liquid and gaseous media. Solenoid valves are ideal solution in the case of using a medium with a limited content of impurities and with a wide range of flow changes, from low to high values.

Outstanding performance - your advantage

1: Snap Coil

The snap-on coil mounting system makes mounting the valve simple and secure. If necessary, a hermetic seal can be ordered to protect against moisture ingress.

2: Wide range of coils up to IP67

A wide range of coils with degrees of protection from IP00 to IP67 provides an optimal technical solution for various applications.

3: Effective water hammer protection

Controlled damping in the final closing stage, optimized diaphragm and equalization bore shape reduce water hammer in all Danfoss valves to as little as 1.5 bar (according to EN 60730-2-8, test pressure 6 bar).

4: Long service life and improved performance

The service life of the valve is significantly increased due to the special shape of the membrane, which helps to reduce the level of internal stresses in the rubber. In addition, this special diaphragm shape ensures optimum flow characteristics.

5: Dirt resistant

The coaxial filter protecting the valve control unit has a self-cleaning function. The leveling hole is easily cleared of dirt in case of clogging.

Danfoss valves are available in brass, DZR dezincification resistant brass and stainless steel. The standard brass version is used in moderate corrosive environments, while the other two materials are ideal for use in more aggressive environments.

Cases and coilssolenoid valves Danfossusually shipped separately and assembled on site.
Assembly is quick and easy, without the use of tools, ensuring optimal design flexibility and ready to go. Replacing the coil is done without stopping and draining the system.
Solenoid valves can also be supplied assembled on request.

Danfoss EV210A, Compact 2-way direct acting solenoid valves

EV210A- large group two-position, two-way, direct-acting solenoid valves, characterized by small dimensions, designed for use in industrial equipment.
The compact design, combined with an extensive range of coils, allows the EV210A to be used in a wide variety of industrial applications.

Two-position two-way
Compact dimensions
・Direct acting
DN 1.2 - 3.5
G 1/8 to G 1/4

EV210A Direct-operated 2/2-way compact solenoid valves	EV210A valve, stainless steel	Solenoid valve EV210A NC - 1.5B G 18F	Solenoid valve EV210A - 1.2B G 18E
solenoid valve EV210A - spareparts	Solenoid valve EV210A 1 2 3 5 SS - 2,5SS G18E	Solenoid valve EV210A without coil	Solenoid valve EV210A NO - 1,5B G14E

Specifications solenoid valves EV-210A

Danfoss EV220A, 2-way servo solenoid valves

Two-position two-way
With servo
DN 6 - 22
G 1/4" to G 1"
Brass valve body
NC (normally closed) and NO (normally open) options
· Threaded connection to ISO 228/1 or with NPT thread

EV220A Servo-operated 2/2-way solenoid valves	EV220A solenoid valve NC - normally closed	Solenoid valve EV220A	Solenoid valve EV220A NC - 6B G14N
Solenoid valve EV220A without coil

Specifications for EV-220A Solenoid Valves

Danfoss EV220A with filter, 2-position, servo-actuated, two-way solenoid valves

EV220A Servo-operated 2/2-way solenoid valves w/ filter

The EV220A is a series of compact, servo-operated, two-position, two-way solenoid valves specifically designed for use in machines and equipment where space is limited.
The built-in replaceable filter ensures long-term trouble-free operation even in the presence of impurities in the working environment.

Two-position two-way
With servo
Built-in replaceable filter
DN 11
G 1/2"
Brass valve body
NC (normally closed)

Specifications of EV-220A solenoid valves with filter

Danfoss EV310A, Compact 3 position 2 way direct acting solenoid valves

EV310A is a large group of small direct acting on/off, three way solenoid valves designed for use in industrial applications such as control valves.

· Three-position two-way
・Direct acting
DN 1.2 - DN 3.5
G 1/8" to G 1/4"
Valve body made of brass or stainless steel

EV310A Direct-operated 3/2-way compact solenoid valves

EV310A Direct-operated 3/2-way compact solenoid valves without coil

Specifications for EV-310A Solenoid Valves

Danfoss EV210B, Direct acting 2-way solenoid valves

EV210B is a large group of direct acting on/off two way solenoid valves for universal use. EV210B is a series of extremely reliable high performance valves that can be used in harsh operating conditions.

Two-position two-way
Enhanced Performance Series
・Direct acting
DN 1.5 - 25
Valve body made of brass or stainless steel
NC (normally closed) and NO (normally open) options
ISO 228/1 from G 1/8" to G 1"
UL Listed NPT Thread (EVI) Option

EV210B Direct-operated 2/2-way solenoid valves	Solenoid valve EV210B 3B NO BB clipon - 3B G 14E	Solenoid valve EV210B SS without coil	Solenoid valve EV210B 1 5 4 5 SS - 1.5SS G 18E
	Solenoid valve EV210B NC - 3B G 14E	Solenoid valve EV210B - 3B G 14F	Solenoid valve EV210B - BY coil
Solenoid valve EV210B - 25 B G 1E	Solenoid valve EV210B - 6B G 14E	Solenoid valve EV210B - 2 B G 18N	Solenoid valve EV210B - 1.5B G 18E
Solenoid valve EV210B - 3 B G 14N	Solenoid valve EV210B - spareparts	Solenoid valve EV210B - 1.5SS G 18N	Solenoid valve EV210B SS BB Clipon - 3SS G 18E
Solenoid valve EV210B without coil	Solenoid valve EV210B - 8B G 38E

Specifications for EV-210B Solenoid Valves

Danfoss EV220B (series 6-22), 2-position, servo-actuated solenoid valves

EV220B 6-22 is a group of two-position, two-way, servo-actuated solenoid valves with threaded connections from 1/4" to 1".
This group is intended, in particular, for manufacturers of serial equipment requiring strength at moderate flow rates.

Two-position two-way
With servo
DN 6 - 22
Valve body made of brass or brass resistant to selective corrosion
NC (normally closed) and NO (normally open) options
Threaded connection according to ISO 228/1 or with NPT thread (EVSI and EVSI-U)

EV220B (6-22 series) Servo-operated 2/2-way solenoid valves	Solenoid valve EV220B 6-22 BYcoil - BY240CS	Solenoid valve EV220B- 10B G 12E	Solenoid valve EV220B NO - GP208/240J
Solenoid valve EV220B 6-22 10B	Solenoid valve EV220B -22 NC NPT	Solenoid valve EV220B - 12B G 12N	Solenoid valve EV220B 6-10 NO

Danfoss EV220B (Series 15-50), 2-position, servo-actuated, two-way solenoid valves

EV220B (15-50 series) Servo-operated 2/2-way solenoid valves

EV220B 15-50 is a group of universal servo actuated on/off two way solenoid valves.
The valve body, made of conventional brass, corrosion-resistant brass or stainless steel, allows for a wide range of applications.
Built-in control loop filter, adjustable closing time and protection class up to IP67 ensure optimal performance characteristics even in critical conditions.

Two-position two-way
With servo
DN 15 - DN 50
Valve body available in brass, selective corrosion resistant brass
NC and NO options
Threaded connection according to ISO 228/1 or NPT (EVSI and EVSI-U)

With water hammer protection
Option with adjustable closing time available

Specifications for EV-220B Solenoid Valves

Danfoss EV220B (series 65-100), 2-position, servo-actuated, two-way solenoid valves

EV220B (65-100 series) Servo-operated 2/2-way solenoid valves

EV220B 65-100 is a group of two-position, two-way solenoid valves designed for use in heavy industrial plants With high values consumption. Features of such a valve are a cast-iron body and flange connection.
The water hammer protected design and built-in pilot filter ensure reliable operation over a long period.

Two-position two-way
With servo
DN 65 - 100
Cast iron valve body
· Flange connection
· Operating pressure up to 10 bar
Max. working environment temperature: 90° C

Specifications for EV-220B Solenoid Valves

Danfoss EV222B, Two-position, 2-way, servo-actuated solenoid valves with isolating diaphragm

EV222B Servo-operated 2/2-way solenoid valves with isolating diaphragm

EV222B is a group of pilot actuated solenoid valves designed for use with dirty or corrosive media.
The valve body made of stainless steel, the isolating diaphragm protecting the electromagnetic system from contamination, the built-in pilot filter, the adjustable closing time, and the degree of protection up to IP67 ensure reliable and successful operation.

Two-position two-way
With servo
insulating membrane
DN 15 - DN 50

Normally closed version only

Specifications for EV-222B Solenoid Valves

Danfoss EV224B, 2-way servo operated solenoid valves for high pressure

EV224B Servo-operated 2/2-way solenoid valves for high pressure

EV224B - 2-position 2-way solenoid valve high pressure, indirect action, with servo drive, designed for use at working pressure up to 40 bar and working medium temperature up to 60 °C; available in normally closed and normally open versions:
The built-in pilot filter included as standard, adjustable closing time, and protection rating up to IP67 (depending on the coil) ensure reliable and successful operation.

· For high pressure pneumatic systems (up to 40 bar);
Two-position two-way, with servo
DN 15 - 20
NC and NO options
Brass valve body
Built-in filter to protect the pilot system
Based on proven EV220B technology

Specifications for EV-224B Solenoid Valves

Danfoss EV250B, 2-way positive lift solenoid valves

The EV250B positive lift valve can operate from zero to 10 bar differential pressure. This group of on-off two-way valves is primarily intended for use in closed circuits with low pressure drop at medium flow rates. The valve body, made of brass resistant to selective corrosion, ensures a long service life even in aggressive steam environments.
The EV250B valve is compatible with a wide range of Danfoss coils, ranging from IP00 to IP67. Working medium temperatures up to 140 °C (low pressure steam).

Two-position two-way
forced lift control
DN 10 - DN 22

NC (normally closed) and NO (normally open)
From zero differential pressure
Particularly suitable for closed loops, as well as for tank drain systems
Available on request with WRAS, VA and UL approvals
Threaded connections in accordance with ISO or standard pipe thread

EV250B Assisted lift operated 2/2-way solenoid valves	Assisted lidt operated solenoid valves, type EV250B NO (normally open)	Assisted lift operated solenoid valves, type EV250B NO 3/8 with coil	Assisted lift operated solenoid valves, type EV250B NO 3/4 with coil
Assisted lift operated solenoid valves, type EV250B NC with coil	Assisted lift operated solenoid valves, type EV250B NC	Assisted lift operated solenoid valves, type EV250B NO

Specifications for EV-250B Solenoid Valves

Danfoss EV260B, Motorized 2-way proportional solenoid valves

EV260B Servo-operated 2-way proportional solenoid valves

EV260B - a group of proportional (smooth characteristic) two-way solenoid valves with servomotor, with threaded connection from 1/4" to 3/4".
By modulating the coil current, the armature can be moved to any position in the armature tube, and the valve is moved to any position from fully closed to fully open.
When the coil current reaches its maximum value, the valve is fully open.

Proportional (with a smooth characteristic)
For smooth flow control
2-way
With servo
DN 6 - 20
Small time constant
Linear characteristic over the entire control range
Closes in case of power failure (fail safe)
Coil protection class IP67
Supply voltage 24 V DC

Specifications for EV-260B Solenoid Valves

Danfoss EV310B, Direct acting 3-way on-off solenoid valves

EV310B is a large group of direct acting 3 position 2 way solenoid valves for universal use.
EV310B is a series of very rugged, high performance valves that can be used in any type of harsh working environment.

· Three-position two-way
・Direct acting
DN 1.5 - DN 3.5
Brass valve body
Threaded (from G 1/8" to G 3/8") or flanged (32x32 mm) connections
NC (normally closed) and NO (normally open) options
Manual override options

EV310B Direct-operated 3/2-way solenoid valves

EV310B-without-coil

Specifications for EV-310B Solenoid Valves

Danfoss EV215B, 2-position, direct-acting solenoid valves, for steam

The EV215B is a direct acting on/off two way solenoid valve designed for use in steam applications.
The design is based on the conventional Danfoss concept for high performance direct acting valves, but the valve disc is made of PTFE, ensuring reliable operation even with contaminated steam.
The valve body made of stainless steel ensures a long service life even in aggressive steam environments.

Two-position two-way

・Direct acting
DN 3
G 1/4"
Stainless steel valve body
Only NC option
Threaded connection according to ISO 228/1 or NPT (EVSIS 3)

EV215B Direct-operated 2/2-way solenoid valves for steam

Solenoid valve EV215B SS without coil

Solenoid valve EV215B NC NPT

Specifications for EV-215B Solenoid Valves

Danfoss EV225B, 2-position, servo-actuated solenoid valves, for steam

EV225B Servo-operated 2/2-way solenoid valves for steam

The EV225B is a servo operated on/off two way solenoid valve designed for use in steam applications.
Its design is based on the use of a fluoroplastic membrane, which ensures reliable operation even when working with contaminated steam.
Corrosion-resistant brass valve body and stainless steel valve seats ensure a long service life even in aggressive steam environments.

Two-position two-way
Specially designed for steam applications
With servo
DN 6 - DN 25
G 1/4" to G 1"
Corrosion-resistant brass valve body
NC (normally closed)
· ISO 228/1 or UL listed option with NPT thread (EVSIS)

Specifications for EV-225B Solenoid Valves

Danfoss solenoid valve bodies and coils are usually shipped loose and assembled on site.

Assembly is quick and easy, without the use of tools, ensuring optimal design flexibility and ready to go. Replacing the coil is done without stopping and draining the system.

Solenoid valves can also be supplied assembled on request.

Danfoss has developed the attractively priced EV251B valve to meet virtually any industrial fluid control application. In more than 90% of applications, you will benefit from the EV251B series valves.

Valve selection is extremely simple: you only need to know the size of the pipe and the supply voltage. The valve will ensure perfect operation regardless of the presence of differential pressure in the system.

The EV251B provides the best water hammer dampening of any competitor. This not only reduces noise and vibration, but also increases the life of the remaining components - what is needed for system reliability.

EV251B valves are supplied complete with coil and plug and NBR seals suitable for water, air and oils.

Main advantages:

• High performance and water hammer damping
• Attractive price
• High versatility of application, including for:
  • heating systems
  • closed loop systems
  • systems where the liquid goes by "gravity" (draining of containers)
  • leakage protection systems
  • low vacuum systems
• High degree of opening at zero pressure drop
• Low maintenance costs thanks to anti-contamination design
• Convenient snap-on coil mounting system for ease of assembly and high vibration resistance

EV210A is a large group of small size direct acting on/off two way solenoid valves for use in industrial equipment. The compact design, combined with an extensive range of coils, allows the EV210A to be used in a wide variety of industrial applications.

• Two-position two-way
• Compact dimensions
• direct action
• DN 1.2 - 3.5
• G 1/8 to G 1/4

EV220A is a series of compact, servo-actuated, 2-position, 2-way solenoid valves specifically designed for use in machines and equipment where space is limited.

• Two-position two-way
• with servo
• DN 6 - 22
• G 1/4" to G 1"
• Brass valve body
• NC (normally closed) and NO (normally open) options
• Threaded connection according to ISO 228/1 or with NPT thread

EV220A is a series of compact, servo-actuated, 2-position, 2-way solenoid valves specifically designed for use in machines and equipment where space is limited. The built-in replaceable filter ensures long-term trouble-free operation even in the presence of impurities in the working environment.

• Two-position two-way
• with servo
• Integrated replaceable filter
• DN 11
• G 1/2"
• Brass valve body
• NC (normally closed)

The EV310A is a large group of small direct acting on/off three way solenoid valves designed for use in industrial applications such as control valves.

• Three position two way
• direct action
• DN 1.2 - DN 2
• G 1/8" to G 1/4"
• Valve body made of brass or stainless steel
• NC (normally closed) and NO (normally open) options

EV210B is a large group of direct acting on/off two way solenoid valves for universal use. EV210B is a series of extremely reliable high performance valves that can be used in harsh operating conditions.

• Two-position two-way
• Enhanced Performance Series
• direct action
• DN 1.5 - 25
• Valve body made of brass or stainless steel
• NC (normally closed) and NO (normally open) options
• ISO 228/1 G 1/8" to G 1"
• UL Listed NPT (EVI) Threaded Option

EV220B 6-22 is a group of two-position, two-way, servo-actuated solenoid valves with threaded connections from 1/4" to 1". This group is intended, in particular, for manufacturers of serial equipment requiring strength at moderate flow rates.

• Two-position two-way
• with servo
• DN 6 - 22
• Valve body made of brass or brass resistant to selective corrosion
• NC (normally closed) and NO (normally open) options
• Threaded connection according to ISO 228/1 or with NPT thread (EVSI and EVSI-U)

EV220B 15-50 is a group of universal servo actuated on/off two way solenoid valves. The valve body, made of conventional brass, corrosion-resistant brass or stainless steel, allows for a wide range of applications. Built-in pilot filter, adjustable closing time and protection class up to IP67 ensure optimum performance even under critical conditions.

• Two-position two-way
• with servo
• DN 15 - DN 50
• Valve body available in brass, selective corrosion resistant brass
• NC and NO options
• Threaded connection according to ISO 228/1 or NPT (EVSI and EVSI-U)
• With water hammer protection
• Available with adjustable closing time

EV220B 65-100 is a group of on/off two way solenoid valves designed for use in heavy duty industrial applications with high flow rates. Features of such a valve are a cast-iron body and a flange connection. The water hammer protected design and built-in pilot filter ensure reliable operation over a long period.

• Two-position two-way
• with servo
• DN 65 - 100
• Cast iron valve body
• flange connection
• Operating pressure up to 10 bar
• Max. working environment temperature: 90° C

EV222B is a group of pilot actuated solenoid valves designed for use with dirty or corrosive media. The valve body made of stainless steel, the isolating diaphragm protecting the electromagnetic system from contamination, the built-in pilot filter, the adjustable closing time, and the degree of protection up to IP67 ensure reliable and successful operation.

• Two-position two-way
• with servo
• isolating membrane
• DN 15 - DN 50
• Normally closed only

EV224B is a two-position, two-way, high-pressure solenoid valve, indirectly operated, with a servomotor, designed for use at an operating pressure of up to 40 bar and a medium temperature of up to 60 °C; available in normally closed and normally open versions: Built-in pilot filter included as standard, adjustable closing time, and protection rating up to IP67 (depending on coil) ensure reliable and successful operation.

• For high pressure pneumatic systems (up to 40 bar);
• Two-position two-way, with servo
• DN 15 - 25
• NC and NO options
• Brass valve body
• Built-in filter to protect the pilot system
• Based on proven EV220B technology

The EV250B positive lift valve can operate from zero to 10 bar differential pressure. This group of on-off two-way valves is primarily intended for use in closed circuits with low pressure drop at medium flow rates. The valve body, made of brass resistant to selective corrosion, ensures a long service life even in aggressive steam environments. The EV250B valve is compatible with a wide range of Danfoss coils, ranging from IP00 to IP67. Working medium temperatures up to 140 °C (low pressure steam).

• Two-position two-way
• forced lift control
• DN 10 - DN 22
• NC (normally closed) and NO (normally open)
• From zero differential pressure
• Particularly suitable for closed circuits as well as tank drain systems
• Optionally available with WRAS, VA and UL approvals
• threaded connections according to ISO or NPT

The combined solenoid valve type EV251B is equipped with a forced opening system and is excellent for closed and open systems with low or unstable pressure, where there is practically no pressure drop. Valves type EV251B are supplied complete with coil and plug.

• For water, air, oils and other neutral media
• Capacity (Kv) up to 5 m3/h
• Pressure drop up to 10 bar
• Medium viscosity up to 50 cSt
• Temperature environment up to 80 °C
• Working environment temperature from -10 to 90 °C
• Coil protection class IP 65
• Connection: external thread from G3/8 to G1

EV260B - a group of proportional (smooth characteristic) two-way solenoid valves with servomotor, with threaded connection from 1/4" to 3/4". By modulating the coil current, the armature can be moved to any position in the armature tube, and the valve is moved to any position from fully closed to fully open. When the coil current reaches its maximum value, the valve is fully open.

• Proportional (smooth)
• For smooth flow control
• two-way
• with servo
• DN 6 - 20
• Small time constant
• Linear characteristic over the entire control range
• Closes in case of power failure (fail safe)
(Order)

The EV215B is a direct acting on/off two way solenoid valve designed for use in steam applications. The design is based on the conventional Danfoss concept for high performance direct acting valves, but the valve disc is made of PTFE, ensuring reliable operation even with contaminated steam. The valve body made of stainless steel ensures a long service life even in aggressive steam environments.

• Two-position two-way
• direct action
• G 1/4"
• Stainless steel valve body
• NC option only
• Threaded connection according to ISO 228/1 or NPT (EVSIS 3)
(Order)

The EV225B is a servo operated on/off two way solenoid valve designed for use in steam applications. Its design is based on the use of a fluoroplastic membrane, which ensures reliable operation even when working with contaminated steam. Corrosion-resistant brass valve body and stainless steel valve seats ensure a long service life even in aggressive steam environments.

• Two-position two-way
• Specially designed for steam applications
• with servo
• DN 6 - DN 25
• G 1/4" to G 1"
• Valve body made of brass resistant to selective corrosion
• NC (normally closed)
• ISO 228/1 or UL listed option with NPT thread (EVSIS)
(Order)

Valves (gates) electromagnetic solenoid DANFOSS

In our company you can buy solenoid valves Danfoss from Denmark. Danfoss has factories around the world, including in Russia, so delivery to the end user takes place as soon as possible. The issues of quality of valve performance are given increased attention. Certification solenoid valves according to European standards makes their operation reliable, throughout the entire service life. Thanks to special alloying additives and latest materials The valve body is highly resistant to corrosion. The installation of explosion-proof and intrinsically safe solenoid coils on solenoid valves (valves) makes their use safe for refrigerants, oils, fuels or gases. Danfoss fuel and water solenoid valves can use special solenoid coils with different levels protection and minimal power consumption.

Manufactured by Danfoss (Denmark)
The product is certified. Warranty 1 year

Catalog of Danfoss solenoid valves - download >>

Solenoid valve (valve) EV220B

For water, air, oil;
Body: brass; Membrane: NBR, on request EPDM;
Working temperature: −10… +90 о С;